Berenson Maestro Series 3-3/4" (95 mm) Center to Center Rubbed Bronze Pull, - 7176-1010-C

Maestro Pull 96mm Center To Center For Cabinets

Maestro pull 96mm center to center defines this Berenson Corporation Maestro Series cabinet pull as a precise 3-3/4 inch center to center fitting, so installers can match existing drilling or templates on doors and drawers. The zinc die cast material provides a consistent, rigid body, which supports accurate alignment across multiple fronts. A rubbed bronze finish creates a dark, muted appearance, which helps this pull coordinate with other rubbed bronze decorative hardware in the same space. The 4-1/2 inch overall length gives enough hand contact area, which helps users grab the pull comfortably on doors or drawers. A 1-1/16 inch projection sets the hand clearance off the face, which contributes to everyday usability without excessive stand-off. The 7/16 inch width gives this pull a slim profile, which works well visually across cabinet runs while still providing a defined gripping edge.

Key Maestro Rubbed Bronze Pull Details

• The 3-3/4 inch center to center drilling matches the Maestro pull layout, which lets installers use standard jigs or replace existing 96mm pulls without altering hole spacing.
• The zinc die cast construction forms a solid, uniform pull body, which supports repeatable alignment and consistent feel on cabinet doors and drawers.
• The rubbed bronze finish defines the surface color and sheen, which helps the pull blend with other rubbed bronze decorative hardware elements in a room.
• The 4-1/2 inch overall length extends beyond the mounting points, which offers ample gripping surface for daily cabinet and drawer operation.
• The 1/2 inch base diameter at each end defines the footprint on the cabinet face, which helps installers understand coverage around the drilled holes.
• The 7/16 inch width and 1-1/16 inch projection control the pull profile off the door, which affects both hand clearance and how far it stands from the cabinet front.

Maestro Cabinet Pull Sizing And Fit Details

The 3-3/4 inch center to center measurement gives this Maestro pull a defined mounting span, which helps when laying out new cabinets or matching existing 96mm holes. With a 4-1/2 inch overall length, the pull extends slightly past the screws, which provides a balanced look across typical cabinet rail widths. The 1-1/16 inch projection describes how far the pull stands off the front, which influences both door swing clearance and finger room behind the bar. A 7/16 inch width keeps the profile lean, which is useful when fitting multiple pulls across narrow drawer fronts. The 1/2 inch base diameter at each mounting point indicates the bearing area on the surface, which helps cover the drilled hole edges while maintaining a clean, compact footprint.

Using The Berenson Maestro Pull In Projects

Where This 3-3/4 Inch Maestro Pull Fits Best

The Maestro pull with 3-3/4 inch center to center sizing fits cabinet and drawer layouts drilled on the common 96mm pattern, which streamlines work in kitchens, baths, and shop cabinets using that standard. The rubbed bronze finish identifies this pull as a dark, warm-toned option, which suits projects built around other rubbed bronze components. Its 4-1/2 inch length and 7/16 inch width keep the pull visually proportional on typical door and drawer sizes, which matters when running multiple pulls in a line. The 1-1/16 inch projection defines how far it stands out, which supports finger access on thicker door profiles without feeling bulky on smaller fronts.

Details That Support Consistent Cabinet Pull Results

The Maestro zinc die cast pull body offers a uniform casting, which helps each 7176-1010-C piece match in shape for consistent alignment across long cabinet runs. The 3-3/4 inch center to center dimension ties directly to many drilling jigs, which reduces layout variability from door to door. A 1/2 inch base diameter at each end provides a clear reference for where the pull meets the surface, which helps installers position edges relative to rails and stiles. The combination of 4-1/2 inch overall length and 1-1/16 inch projection defines a predictable hand feel, which keeps user experience similar whether the pull is on a door or a drawer. The rubbed bronze finish designation keeps surface appearance consistent from pull to pull, which matters when lining them up under lighting where color shifts would stand out.

Common Questions About This Maestro Cabinet Pull

Select This Maestro Pull For 96mm Cabinet Runs

The Berenson Maestro Series rubbed bronze pull combines a 3-3/4 inch (96mm) center to center layout with 4-1/2 inch overall length, which suits standard cabinet drilling and everyday hand use. Zinc die cast construction and a defined 1-1/16 inch projection create a predictable feel across doors and drawers. The rubbed bronze finish and 7/16 inch width support a coordinated, slim look on cabinetry. For projects built around the 7176-1010-C pattern, this Maestro pull offers a defined set of dimensions that align with common cabinet hardware layouts.