Berenson Maestro Series 5-1/16" (128 mm) Center to Center Satin Nickel Pull, - 7178-1015-C
Description
Berenson Maestro Pull 128mm Center To Center
Berenson Maestro pull 128mm center to center gives cabinets a consistent grip point using the 5-1/16 inch (128 mm) center to center drilling, so layouts line up cleanly across doors and drawers. The 5-15/16 inch overall length creates a balanced look around the mounting holes, which helps larger and smaller fronts share the same visual rhythm. Its 1/2 inch width provides a slim profile that stays out of the way while still giving fingers enough purchase. The 1-3/16 inch projection stands the handle off the surface, which helps hands clear the cabinet face during use. The satin nickel finish delivers a muted metallic look, which works well in jobs calling for a softer, brushed appearance. A zinc die cast construction gives the pull a solid feel, which supports everyday cabinet use in typical woodworking environments.
Key Maestro Series Pull Details For Projects
- The 5-1/16 inch (128 mm) center to center drilling aligns with common cabinet boring patterns, which helps maintain repeatable spacing across multiple fronts on a run of cabinets.
- The 5-15/16 inch length lets the pull slightly overhang the mounting span, which creates clear visual endpoints that help installers sight straight lines along doors and drawers.
- The 1-3/16 inch projection sets the grip away from the face, which gives fingers room behind the pull and reduces knuckle contact with the cabinet surface during regular operation.
- The 1/2 inch width keeps the pull visually light, which can be useful on smaller fronts where a wider handle might crowd the stile or rail edges.
- The 9/16 inch base diameter at each end defines a compact footprint, which matters when positioning the pull near panel details, edge profiles, or neighboring hardware.
- The satin nickel finish provides a soft metallic sheen, which supports designs that call for a brushed, understated look instead of a highly reflective surface.
Mounting Dimensions For Straightforward Alignment
The 5-1/16 inch (128 mm) center to center dimension sets the hole spacing for this Maestro series pull, which lets installers drill consistent patterns using standard jigs. The 5-15/16 inch overall length leaves a controlled amount of pull body beyond the holes, which helps line up hardware visually on doors and drawers. A 1-3/16 inch projection defines how far the handle stands off the face, which affects how templates are positioned relative to door thickness. The 9/16 inch base diameter contains the contact area at each foot, which is useful when locating the pull close to panel routes or narrow rails.
Using This Berenson Maestro Satin Nickel Pull
Where This Zinc Die Cast Pull Fits Best
This Berenson Maestro Series pull sits in the Decorative Hardware & Moldings, Handles and Pulls category, which places it squarely in cabinet and furniture handle applications. The 5-1/16 inch (128 mm) center to center spacing lines up with a widely used drilling standard, which supports jobs that call for multiple pulls to share the same layout across a room. Its satin nickel finish suits projects needing a muted metallic tone, which helps it blend into designs where bright, reflective hardware could dominate the door or drawer face. The 1/2 inch width and 5-15/16 inch length combination works on many cabinet front sizes, which gives designers and installers a mid-size option between small knobs and very long handles.
Details That Support Consistent Cabinet Results
The M4 x 45mm screw size specification defines the thread and length pairing for this Maestro pull, which matters when matching hole preparation and material thickness during installation. The zinc die cast material gives each pull a uniform form, which supports consistent alignment when multiple units are mounted in a straight run. A 1-3/16 inch projection determines how far the hand clears the cabinet face, which can influence user comfort on frequently used doors and drawers. The 9/16 inch base diameter sets a small but defined footprint, which helps each pull seat predictably against flat cabinet surfaces. The Maestro collection identity connects this pull to the broader Maestro Series, which can be helpful when coordinating handles across different cabinet locations while keeping the same design language.
Common Questions About Maestro Series Pull Details
What center to center size is this Maestro pull?
The Berenson Maestro Series pull has a 5-1/16 inch (128 mm) center to center, which sets the drilling distance between mounting points on cabinet doors and drawers.
What is the overall length of the 7178-1015-C pull?
The 7178-1015-C Maestro pull measures 5-15/16 inches in overall length, which slightly overhangs the mounting span for a balanced appearance on cabinet fronts.
How far does this satin nickel pull project from the cabinet?
The Maestro satin nickel pull projects 1-3/16 inches from the cabinet surface, which provides hand clearance between the grip and the door or drawer face.
What material is the Berenson Maestro cabinet pull made from?
The Berenson Maestro cabinet pull is made from zinc die cast, which gives the handle a solid, consistent form suitable for typical cabinet hardware use.
What screw size is specified for this cabinet pull?
This Maestro pull uses an M4 x 45mm screw size, which defines the thread and length needed when fastening it through cabinet doors or drawer fronts.
What finish does the 7178-1015-C Maestro pull have?
The 7178-1015-C Maestro pull has a satin nickel finish, which provides a soft metallic look suited to designs favoring a brushed rather than mirror-like appearance.
Selecting This Satin Nickel Pull For Your Project
The Berenson Maestro Series 5-1/16 inch (128 mm) center to center satin nickel pull combines mid-size dimensions, a 5-15/16 inch overall length, and a 1-3/16 inch projection to support everyday cabinet use. Its zinc die cast construction and satin nickel finish provide a defined style and feel that ties into the Maestro collection. For projects calling for a 128 mm drilling pattern with a subtle metallic look, this 7178-1015-C pull from Wurth Baer Supply provides a clearly specified option for cabinet and furniture fronts.