Berenson Maestro Series 5-1/16" (128 mm) Center to Center Rubbed Bronze Pull, - 7180-1010-C

Berenson Maestro Rubbed Bronze Pull For Cabinets

Berenson Maestro rubbed bronze pull gives cabinets and drawers a defined 5-1/16 inch center to center grip point, so installers can drill accurately and keep hardware layout consistent across a run of doors or fronts. The pull length of 5-15/16 inch covers common existing hole patterns near this size, which supports straightforward change-outs on many cabinets using similar spacing. A zinc die cast construction provides a solid-feeling handle, which helps doors and drawers open with a confident pull in everyday use. The rubbed bronze finish delivers a dark, muted metal look, so it coordinates cleanly with many stained woods and darker painted finishes in kitchens or shops. With a projection of 1-3/16 inch, the pull stands off the face enough for fingers to hook comfortably, which is useful on thicker door profiles. A width of 1/2 inch offers a slim front view, keeping the hardware visually light while still practical to grasp.

Key Maestro Series Pull Details For Projects

• The 5-1/16 inch (128 mm) center to center dimension defines exact hole spacing, which streamlines layout, drilling, and alignment when running multiple cabinet doors or drawers in a project.
• The 5-15/16 inch overall length gives coverage around the mounting holes, which can help conceal minor blemishes from previous hardware during remodel or refacing work.
• The 1-3/16 inch projection sets the pull out from the cabinet face, creating hand clearance that supports comfortable opening even on doors with edge profiles or applied moldings.
• The 1/2 inch width keeps the pull visually narrow, which suits tight drawer fronts or smaller doors where a bulkier handle might crowd the face design.
• The 9/16 inch base diameter defines the footprint at each contact point, which helps in planning around panel details, rails, or stile widths during hardware layout.
• The rubbed bronze finish delivers a dark, traditional metal tone, which works well where a warmer, low-sheen hardware appearance is preferred on cabinetry.

Installation Dimensions And Screw Information

This Maestro 128mm center to center pull uses a 5-1/16 inch mounting span, which aligns to common metric-based drilling jigs and supports repeatable cabinet hardware installation. The specified M4 x 45mm screw size matches the threaded inserts in the zinc die cast pull, so installers can prepare appropriately sized pilot holes in wood fronts. A base diameter of 9/16 inch at each mounting point defines the bearing surface against the cabinet, which helps distribute load on the door or drawer face. With its 1-3/16 inch projection and 1/2 inch width, the pull profile leaves enough finger room without extending excessively, which can be important on narrow walkways or closely spaced cabinet runs.

How This Maestro Pull Fits Cabinet Workflows

Where The Maestro Series Cabinet Pull Works

The Maestro series cabinet hardware pull from Berenson Corporation fits projects that call for a 5-1/16 inch (128 mm) center to center spacing, so it suits both new cabinet builds and updates that follow this standard pattern. In kitchen or shop cabinetry using darker stains or paint, the rubbed bronze finish pairs with the color tone, helping hardware sit visually in line with the casework rather than stand out sharply. The zinc die cast material gives the pull a solid, stable body, which supports frequent drawer and door use in active work areas. A pull length of 5-15/16 inch offers enough span for wider drawer fronts, so hands can find a comfortable grip point without crowding near the screws. The 1-3/16 inch projection also keeps fingers clear of raised panel edges, helping doors open smoothly even when neighboring cabinets sit close together.

Details That Support Repeatable Cabinet Results

The 5-1/16 inch center to center measurement on this Maestro series cabinet hardware aligns with 128 mm drilling templates, which allows installers to use standard jigs for quick, repeatable hole placement across a bank of fronts. The 9/16 inch base diameter gives a defined circular contact area at each end of the pull, which can help cover slight tear-out from drilling and present a clean interface against the wood. With a width of 1/2 inch, the pull face remains slim, so it is easier to maintain consistent reveals between multiple handles on narrow drawers. Using the specified M4 x 45mm screws with the zinc die cast body helps the threaded connection seat properly, which is important for keeping hardware tight under regular opening and closing. The rubbed bronze finish on the pull delivers a consistent color across pieces in the same job, supporting uniform hardware appearance on runs of cabinets.

Common Questions About Maestro 128mm Cabinet Pull

Selecting This Pull For 128mm Cabinet Layouts

The Maestro 128mm center to center pull from Berenson Corporation ties together specific drilling dimensions, a rubbed bronze finish, and zinc die cast construction, so it fits cabinet layouts built around 5-1/16 inch spacing. When a project calls for hardware that matches this center to center and uses M4 x 45mm screws, this 5-15/16 inch long pull offers a defined option for both new work and updates. For jobs where a dark metal tone is desired on doors or drawers, this rubbed bronze handle provides a consistent specification to carry across the entire run.