Würth 23 Gauge x 1" L Micro Pin, ES2325P 10M - 10000/Box

Wurth 23 Gauge Micro Pin For Detailed Woodwork

Wurth 23 gauge micro pin nails give you a fine fastening option for cabinet doors, light trim, carvings and ornamentals, and picture frames, so delicate work stays clean while joints stay supported. The 23 gauge wire size creates very small pin holes, which helps reduce fill and touch-up around visible faces. The 1 inch length provides bite through typical trim and frame stock into a substrate, which supports holding power in common cabinet and light wood assembly tasks. As a pin head nail in the Wurth fasteners line, this product matches jobs where minimal nail head exposure is preferred, which is useful when finishing or staining tight-grain or profiled material. The ES2325P 10M designation identifies this exact Wurth micro pin variant, which helps installers match fasteners consistently across repeat projects and service work.

Fastener Details That Support Clean Results

• The 23 gauge rating keeps the micro pin thin, which leaves a small entry mark that reduces surface repair on cabinet doors, trim, and frames after nailing and finishing steps.
• The 1 inch length allows the pin to pass through common trim or frame thicknesses into backing material, which supports a firm hold during handling, transport, and installation of finished pieces.
• The pin head nail classification means the fastener presents a minimal head, which helps the pin sink close to flush and remain less visible in carvings and ornamentals where profiles draw the eye.
• The Wurth brand fastener designation organizes this nail within Wurth Baer Supply offerings, which helps shops align fastener choice with other Wurth woodworking supplies in their workflow.
• The ES2325P 10M manufacturer part number uniquely identifies this micro pin, which simplifies reordering and keeps fastener selection consistent from job to job in a busy shop environment.

Micro Pin Fit With Common Pinners

This Wurth 23 gauge x 1 inch micro pin is specified to fit the Senco Finish br Pro 10, SHP10; Porter Cable PIN100; Fasco F1B A64-12/18 and similar models, which ties the fastener directly to widely used 23 gauge pinners in the field. Matching the pin to these tools keeps drive performance predictable, which helps reduce jams and supports even depth setting on cabinet doors, light trim, and picture frame stock. Using a micro pin sized for these tools also supports faster transitions between assembly stations, because operators can rely on the same 23 gauge pinner for repeated fastening passes on carvings and ornamentals.

Using Wurth Micro Pins In Woodworking Jobs

Where Wurth 23 Gauge Micro Pins Are Applied

The Wurth 23 gauge x 1 inch micro pin targets cabinet doors, where the thin shank allows fastening of small applied moldings or light components without splitting narrow profiles. Light trim applications benefit from the fine entry point, as it secures casings or decorative strips with minimal surface disruption before paint or stain. Carvings and ornamentals are another focus, with the micro pin holding small carved elements against doors, panels, or frames while keeping fastener marks discreet among detailed cuts. Picture frames also align with this pin, as the slim 23 gauge body supports corner joints and applied profiles without drawing attention away from the frame face.

Why These Micro Pin Details Matter In Use

The 23 gauge classification directly supports finish-focused work because the small diameter reduces the need for heavy filling and sanding, which can protect sharp edges on carved or molded pieces. At 1 inch long, the pin reaches through thin decorative stock into a base material, which improves holding strength on cabinet doors and picture frames during handling. Being defined as a pin head nail means the fastener does not leave a broad head profile, which matters when working on carvings and ornamentals that rely on clean contours and uninterrupted grain. The explicit fit with Senco Finish br Pro 10, SHP10; Porter Cable PIN100; and Fasco F1B A64-12/18 pinners supports smooth tool integration in shops that already operate these models, which helps crews keep a consistent nailing pattern across different woodworking stations. The ES2325P 10M part number ties every order back to the same micro pin, which helps maintain uniform appearance and performance across multiple cabinets or frame runs.

Common Questions About Wurth ES2325P 10M Pins

Select Wurth 23 Gauge Pins For Fine Detail Work

The Wurth 23 gauge x 1 inch micro pin fastener aligns directly with cabinet doors, light trim, carvings and ornamentals, and picture frames, giving woodworking shops a defined option for delicate assemblies. Its 23 gauge diameter, 1 inch length, and pin head nail design support small, discreet fasten points while still engaging backing material. With a stated fit to Senco Finish br Pro 10, SHP10; Porter Cable PIN100; and Fasco F1B A64-12/18, it matches common 23 gauge pinners already on many benches. Using the ES2325P 10M designation simplifies selection when specifying Wurth fasteners for consistent work across multiple jobs.