Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
FS 2424 95 inch guide rail is a Festool rail designed for guidance of plunge saws or routers, so it provides a straight reference when you are breaking down sheet goods or routing dados on longer runs. The 95 inch length supports work on large panels in one pass, which reduces layout time on repetitive cuts. The rail supports plunge saws and routers, so the same track stays in your workflow whether you are cutting or routing. The guide rail works within the Festool system, using the same rail for saw, router or jigsaw, so you can move tools to the rail rather than moving setups around the shop. This system integration helps keep cuts following the same line whenever you switch tools.
The Festool FS 2424 guide rail is built for guidance of plunge saws or routers, so the rail profile matches the base shoes of those tools to keep them tracking straight along the work. The cut mark matching the cut line with the zero clearance guide rail means once the rail is aligned to your layout marks, the saw blade or router bit follows that exact path, which simplifies alignment on cabinet parts and trim pieces. Quick setup with non-slipping bottom strips keeps the rail stable during cuts, so you can focus on feed pressure and tool control instead of fighting rail movement. System integration with the same rail for saw, router or jigsaw keeps every tool traveling on the same reference line, which is useful when you cut to size with a saw and then follow up with routing along that same edge.
The Festool FS 2424 guide rail is specified at 95 inch length, so it fits tasks where you are guiding plunge saws or routers across full-length cabinet sides, tall closet panels, or long countertops. The guide rail is for guidance of plunge saws or routers, which means it pairs with Festool plunge saw bases and router baseplates designed for the FS profile to control the cut path along the entire stroke. The rail supports system integration using the same rail for saw, router or jigsaw, so it fits workflows where multiple Festool tools are used on the same panel layout without changing to different guides. The cut mark that matches the cut line with the zero clearance guide rail helps when you are aligning to scribe lines on veneered panels or prefinished parts, because the rail edge represents the finished cut location. Quick setup with non-slipping bottom strips fits shop and site environments where clamping every cut is not practical, since the strips hold the rail while you position the tool.
The FS 2424 95 inch guide rail uses a splinterguard with zero clearance at the cut, which supports fibers on the workpiece right at the blade or bit, so edge quality improves when working on laminates or plywood facings. The feature where the cut mark matches the cut line with the zero clearance guide rail means once you trust the rail edge, you can locate cuts by lining the splinterguard to your layout, reducing the need for test cuts. Non-slipping bottom strips on the guide rail reduce lateral movement under load, so plunge saws or routers stay on the intended path even as you reach the far end of a 95 inch cut. Repeat cuts with limit stops on the rail means you can lock in distances directly on the guide, which helps reduce tape measure use and supports more consistent part sizes when processing a stack of panels. System integration using the same rail for saw, router or jigsaw keeps the registration surface common across cutting and routing steps, which helps minimize cumulative error when multiple processes reference the same edge.
The FS 2424 95 inch guide rail is for guidance of plunge saws or routers, so it works as the track these tools follow to maintain straight cuts on panels and components.
The guide rail uses a splinterguard with zero clearance at the cut, which supports the material fibers at the cut line to reduce tearout on plywood, laminates, and similar sheet goods.
The FS 2424 95 inch length spans long workpieces such as tall cabinet sides, closet panels, or counters, allowing single-pass guided cuts without repositioning the rail mid-cut.
The FS 2424 guide rail uses non slipping bottom strips that grip the work surface, so the rail stays in position during setup and cutting, reducing time spent adjusting alignment.
The FS 2424 guide rail supports repeat cuts with limit stops, letting you set fixed positions on the rail so multiple parts can be cut to the same dimension efficiently.
The FS 2424 guide rail offers system integration using the same rail for saw, router or jigsaw, so different Festool tools follow the same reference line across multiple operations.
The Festool FS 2424 95 inch guide rail is built for guidance of plunge saws or routers, so it supports straight cuts and routed grooves across longer workpieces. With a cut mark that matches the cut line using the zero clearance guide rail, layout from the rail edge translates directly into finished cut placement. Non-slipping bottom strips and support for repeat cuts with limit stops create a guided system that fits into a Festool workflow using the same rail for saw, router or jigsaw.
Sold In: 1 Each