Amana 10 inch cut off crosscut saw blade

Amana 10 Inch Cut Off Crosscut Saw Blade

Amana 10 inch cut off crosscut saw blade describes a 10 inch diameter circular blade from Amana Tool built for cut-off and crosscut work, so installers and woodworkers can match the blade to sizing and trimming tasks on the job. The 5/8 inch arbor detail defines the mounting interface, helping buyers align the blade to saws designed around that arbor size. The 80 tooth ATB configuration specifies a high tooth count with an alternate top bevel pattern, shaping how the blade engages material during cutoff and crosscut passes. This blade sits in the cutoff and crosscut category under circular saw blades, placing it in the tooling group used for bringing panels and stock to final length. The manufacturer part number DT10800 gives an exact reference for reordering the same blade wherever that code is used.

Cutoff And Crosscut Blade Details That Matter

• The 10 inch diameter defines the cutting circle size, so installers can pair the blade with saws built around 10 inch blades for consistent depth and reach on crosscut setups.
• The 5/8 inch arbor specification identifies the center bore dimension, allowing buyers to match the blade to saws that accept a 5/8 inch arbor for secure mounting and repeatable tracking.
• The 80 tooth count establishes a fine-tooth layout, which shapes how the blade contacts the workpiece during cut-off and crosscut passes for controlled material removal.
• The ATB tooth style describes an alternate top bevel geometry, so each cutting edge alternates angle and can influence how the blade shears fibers across the cut line.
• The product class listing as circular saw blades places this tool within standard powered saw setups, aligning it with common shop and jobsite sawing workflows.
• The Ditec carbide tips detail points to carbide-tipped construction, which supports sharp cutting edges and tool life around the tooth system during regular use.

Installation Fit For 10 Inch 5/8 Arbor Saws

The 10 inch diameter specification lets installers select this blade for saws engineered around that size, helping maintain intended guard clearance and cutting capacity. The 5/8 inch arbor dimension defines the center mounting hole, so the blade is sized to fit saws that are built to clamp a 5/8 inch bore. The circular saw blades product class confirms this blade is designed for powered circular-style saws, guiding it toward table saw or similar cutoff and crosscut stations using that diameter and arbor combination.

Using The DT10800 Blade In Woodworking Workflows

Where This Amana DT10800 Saw Blade Fits Best

The category placement in cutoff and crosscut identifies this Amana DT10800 blade as a fit for operations that bring workpieces to length, so users can assign it to sizing, trimming, and crosscut stations. Within circular saw blades, the 10 inch diameter aligns with saws that operate in the common 10 inch range, positioning the blade for table or similar saws using that size. The 5/8 inch arbor specification focuses this blade on saws whose arbors are built to that diameter, channeling it to machines that clamp a 5/8 inch bore. The 80 tooth count and ATB tooth style define a dense tooth layout with alternating bevels, orienting the blade toward cut-off and crosscut work where that geometry is used to shape the cut path. The Amana Tool brand identification ties the blade to the Amana tooling system, helping shops keep blade selection consistent across bits, blades, and cutters that share this label.

Why The 80 Tooth ATB Layout Supports Accurate Results

The 80 tooth specification on this Amana Tool blade concentrates many cutting edges around the 10 inch circumference, which influences how the blade advances through material during cutoff and crosscut passes. The ATB, or alternate top bevel, tooth description means the tooth tips alternate bevel orientation, which affects how the edge meets material fibers along the cut. Together, the high tooth count and ATB pattern define how this circular saw blade manages engagement in cutoff and crosscut operations. The Ditec carbide tips detail describes a carbide-tipped tooth construction that provides sharp cutting edges at the tooth perimeter. That carbide-based edge configuration supports the working interface between the DT10800 blade and the material as the blade is used in its cutoff and crosscut role.

Common Questions About The DT10800 Cutoff Blade

Selecting The DT10800 For Cutoff And Crosscut Work

The DT10800 10-80 ATB saw blade description points directly to a 10 inch, 80 tooth ATB circular blade built for cutoff and crosscut applications. The 5/8 inch arbor specification ties the blade to saws designed around that mounting size, focusing its use on compatible circular saw stations. With Ditec carbide tips providing the tooth edges and the Amana Tool brand identifying the tooling line, this blade offers a clearly defined option when a 10 inch cutoff and crosscut circular saw blade is needed.