Omega National Red Oak Wine Bottle Storage x 17"W x 29"H, 11 Openings Unfinished - L3380OUF2

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPL3380OUF2 to RSL3380OUF2.

Omega National Red Oak Wine Rack Storage Panel

Omega National red oak wine rack gives a cabinetmaker a 17 inch wide by 29 inch high wine bottle storage panel with 11 openings, so a standard cabinet opening can be turned into organized bottle storage using a known size. The panels are produced from sturdy moldings that measure 3/4 inch wide by 7/16 inch thick with square edges, which creates a consistent frame around each bottle opening and supports repeatable layout in a run of cabinets. Each joint is glued and mechanically fastened, so the rack is built as a fixed assembly ready to be fit into a cabinet or custom opening without separate frame construction. The wine bottle openings are 3-3/4 inch by 3-3/4 inch, providing a defined grid that holds bottles in individual cells and helps keep labels separated and easy to see. The face is routed, giving the rack a custom look that ties in with higher-end cabinet doors. The unfinished red oak construction lets the rack be finished to match surrounding cabinetry in a shop finishing system.

Key Wine Rack Details For Cabinet Projects

• The 17 inch width and 29 inch height set a predictable footprint, which simplifies planning the cabinet opening and aligning this wine bottle storage panel with adjacent shelves or fronts.
• The 11 bottle openings give a fixed bottle count per panel, so a designer can calculate total capacity by counting panels rather than measuring every opening individually.
• Moldings made 3/4 inch wide by 7/16 inch thick with square edges create a slim but defined grid, which helps maintain a clean front appearance while keeping the rack depth consistent inside the cabinet.
• Joints that are both glued and mechanically fastened create a rigid lattice, so the installer works with a stable panel rather than assembling small parts on site.
• Wine bottle openings sized at 3-3/4 inch by 3-3/4 inch set a clear internal cell dimension, which helps the shop coordinate this rack with adjacent dividers or face frame members set on similar centers.
• The routed face provides a custom look at the front of the rack, tying the wine storage visually to profiled doors or drawer fronts in the same red oak kitchen or bar project.

Cut-To-Size Wine Rack Panel Installation Use

The wine bottle storage panel is easily cut to desired size, which lets a shop trim the 17 inch by 29 inch red oak panel to fit a specific cabinet height or width without redesigning the grid. Because the panel starts as a finished lattice of moldings, a fabricator can crosscut or rip to size and then integrate the piece into a face frame opening or frameless cabinet case with standard joinery steps. The sturdy 3/4 inch wide by 7/16 inch thick moldings keep the structure intact during trimming, reducing layout time when multiple cabinet openings use similar dimensions. The routed face means that once the panel is sized and installed flush with the cabinet front, the wine rack can visually align with other profiled components in the run.

Using This Wine Bottle Storage In Cabinet Work

Red Oak Wine Rack Panel In Cabinet Openings

This Omega National Products wine bottle storage panel is identified as a 17 inch wide by 29 inch high piece with 11 openings, so it fits naturally into cabinet sections planned around those dimensions in a kitchen, bar, or similar built-in. Because the product falls under wine bottle and stemware storage, it is suited to projects where bottle organization is part of the cabinet layout, such as above a base cabinet or between upper units. The red oak construction coordinates with red oak cabinetry in woodworking shops that build face frame or frameless systems from the same species, allowing the wine rack to become part of a unified run. With the 3-3/4 inch by 3-3/4 inch openings arranged in a grid, each bottle rests in its own compartment, which helps maintain spacing when cabinets are filled and accessed regularly.

Details That Support Repeatable Wine Rack Results

The panels are produced from sturdy moldings measuring 3/4 inch wide by 7/16 inch thick with square edges, so each rail and stile has a known cross section that simplifies machining surrounding parts to align with the rack. Joints that are glued and mechanically fastened create a rigid matrix, which holds its shape during handling, trimming, and installation in the shop or on site. The routed face provides a custom look that stays consistent from panel to panel, supporting repeatable visual results when several wine rack sections are used in a larger project. Because the panel is easily cut to desired size, a shop can standardize on this Omega National wine bottle storage and adapt it across different cabinet widths or heights while keeping the same bottle opening size and face detail from job to job.

Common Questions About This Red Oak Wine Rack

Select This Wine Rack Panel For Red Oak Jobs

The Omega National red oak wine bottle storage panel combines a 17 inch by 29 inch layout, 11 openings, and 3-3/4 inch by 3-3/4 inch cells, so it slots cleanly into planned wine sections. With sturdy 3/4 inch by 7/16 inch moldings, glued and mechanically fastened joints, and a routed face for a custom look, the panel is ready to integrate into red oak cabinetry. Because it is unfinished and easily cut to desired size, it supports shop finishing and field fitting within a consistent wine bottle storage system.