Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt shelf support in plastic, zinc, and steel provides a pin designed for 5 mm hole applications, so it fits common shelf-system boring patterns in cabinetry and casework. The 5 mm pin diameter creates a snug bearing surface in a correctly sized hole, which helps keep adjustable shelves seated at the intended height under everyday loading. A pin length of 5/16 inch, or 8 mm, sets the support firmly into the side panel without extending too deeply, which helps when side material thickness or drilling depth is controlled for system construction. The shelf rest area measures 5/16 inch, or 8 mm, wide by 7/16 inch, or 11 mm, long, giving each support a defined platform that spreads contact under the shelf edge and reduces concentrated pressure at a single point along the hole line.
This Knape and Vogt shelf support uses a pin diameter sized for a 5 mm hole, which suits metric line-bored panels where 5 mm is the specified drilling size for adjustable shelving. The 5/16 inch (8 mm) pin length is matched to that diameter, so once pressed into the hole it occupies a short, controlled depth that is useful when the panel has limited thickness or when drill-through needs to be avoided. With a shelf rest area of 5/16 inch by 7/16 inch, the support presents a small but defined platform under the shelf, so alignment is straightforward during installation because each pin offers a consistent seating surface for the panel edge on both cabinet sides.
The Knape and Vogt 332 ANO shelf support is suited to installations where panels have 5 mm drilled holes, because the pin diameter is specified for that hole size. In cabinet, closet, or general shelving projects built on a 32 mm system layout or any metric pattern using 5 mm bores, this pin size lets the support sit directly in the existing line of holes instead of requiring a different diameter. The 5/16 inch, or 8 mm, pin length fits these bores with a compact engagement, so the body of the support occupies a defined zone within the panel rather than extending across internal clearances. With a shelf rest area of 5/16 inch by 7/16 inch, each support creates a rectangular ledge that sits under the shelf edge, so shelves rest on a repeatable footprint at every hole position used in the project.
The specified 5 mm pin diameter and 5/16 inch (8 mm) length work together to create a repeatable fit, because every correctly drilled 5 mm hole receives the same depth and side contact from the support. That repeatability simplifies setting multiple shelves at the same elevation; when each support is seated to full depth, the rest areas align so the shelf edges sit level across a run of cabinets or compartments. The shelf rest dimensions of 5/16 inch width by 7/16 inch length define how the load transfers from the shelf down into the side panel, spreading bearing across that area instead of concentrating force at the pin alone. The anochrome finish provides a consistent surface appearance over the plastic, zinc, and steel construction, which keeps the visible portions of the support visually uniform inside the cabinet or shelving unit. Identifying the support by manufacturer part number 332 ANO ties these characteristics to a specific Knape and Vogt item, which helps maintain the same pin size, rest geometry, and finish throughout repeat builds or service replacements.
This shelf support uses a pin diameter for a 5 mm hole, so it fits drilled openings sized to 5 mm in panels designed for metric line-bored shelving layouts.
The 332 ANO shelf support has a pin length of 5/16 inch, or 8 mm, so it occupies that depth in the 5 mm hole within the side panel.
The shelf support rest area is 5/16 inch (8 mm) wide by 7/16 inch (11 mm) long, giving the shelf edge a defined bearing platform at each support point.
This Knape and Vogt shelf support has an anochrome finish, providing a uniform metallic look that coordinates with other anochrome components in a project.
The shelf support is described as plastic, zinc, and steel, which defines it as a mixed-material component combining those materials in its construction.
This product is identified by manufacturer part number 332 ANO, linking it to the Knape and Vogt shelf support with the stated 5 mm pin and rest dimensions.
The Knape and Vogt 332 ANO plastic, zinc, and steel shelf support provides a pin diameter for 5 mm holes, a 5/16 inch (8 mm) pin length, and a 5/16 inch by 7/16 inch rest area, so it matches metric bored panels where those dimensions and the anochrome finish are desired on adjustable shelving runs.
Sold In: 1000 Each
