Formica 4254-99 Brushed Black Aluminum is a Deco Metal metal laminate sheet that combines brushed aluminum or copper metal with a phenolic back to create a decorative surfacing material for vertical interior applications where a metal look is required. The sheet uses a polished, anodized, matte, brushed or mirror aluminum or copper face bonded to a phenolic back, so the visible surface presents a metal appearance while the backing supports the sheet. The 48 x 120 inch size provides a large format panel, which helps cover tall or wide vertical surfaces with fewer seams in the layout. The grade 85 construction at 0.040 inch, or 1.0 mm, thickness gives the laminate a consistent profile, so it behaves predictably when fabricators cut and apply it to appropriate substrates during shop work.
This Formica metal laminate uses a phenolic back that prevents creasing, so the sheet resists bending damage during handling, positioning, and pressing in the shop. That same phenolic back allows for improved adhesion to substrates, which supports even bonding when the laminate is applied to suitable backer materials for wall or panel use. The 48 x 120 inch format means each sheet spans significant vertical height or width, so fabricators can plan layouts to reduce joint lines on interior faces. With a grade 85 construction at 0.040 inch, or 1.0 mm, thickness, the laminate offers a known thickness profile that helps installers anticipate reveals and transitions where this metal surface meets other laminates or finishes.
This Deco Metal metal laminate is engineered for vertical interior applications, so it is suited to surfaces such as interior wall faces or panel systems where a metal appearance is desired without using solid metal plate. The brushed black aluminum look comes from the polished, anodized, matte, brushed or mirror aluminum or copper sheet that forms the face, so the visible side offers a true metal surface while relying on the phenolic back for support. The 48 x 120 inch sheet size enables coverage of tall panels or wide runs in a single piece, which can simplify alignment of the brushed direction and visual pattern across a bank of panels. Because the product is identified as laminate within the Formica HPL category and as Deco Metal metal laminate, it fits naturally into woodworking and surfacing workflows that already use high pressure laminate panels.
The phenolic back in this metal laminate prevents creasing, so installers can move and stage full 48 x 120 inch sheets with less risk of kinking the metal face, which supports cleaner finished surfaces after bonding. That phenolic back also allows for improved adhesion to substrates, helping the laminate sit flat and secure once pressed onto appropriate cores in shop environments. The grade 85 classification with 0.040 inch, or 1.0 mm, thickness gives a repeatable material thickness, so fabricators can plan trim cuts, reveals, and edge builds with predictable results from sheet to sheet. Because the product uses a polished, anodized, matte, brushed or mirror aluminum or copper sheet as the facing, it delivers a real metal surface that still works within laminate fabrication processes, which can streamline production for casework or panel projects that specify a metal finish on vertical interior faces.
Formica 4254-99 Brushed Black Aluminum is a Deco Metal metal laminate with a metal face and a phenolic back, used as a decorative laminate surface for vertical interior applications.
The Formica 4254-99 Brushed Black Aluminum metal laminate is supplied in a 48 x 120 inch sheet size, which lets fabricators cover large vertical interior areas with fewer seams.
The Deco Metal laminate identified as grade 85 has a thickness of 0.040 inch, or 1.0 mm, giving a consistent profile helpful for planning edges and transitions on vertical surfaces.
The phenolic back on this Formica metal laminate prevents creasing and allows for improved adhesion to substrates, supporting cleaner handling and more uniform bonding during fabrication.
This Formica 4254-99 Brushed Black Aluminum metal laminate is engineered for vertical interior applications, directing it toward wall and panel faces rather than horizontal work surfaces.
The face of this Deco Metal laminate uses a polished, anodized, matte, brushed or mirror aluminum or copper sheet, providing a true metal surface appearance on vertical interior installations.
Formica 4254-99 Brushed Black Aluminum metal laminate combines a polished, anodized, matte, brushed or mirror aluminum or copper face with a phenolic back that prevents creasing and allows for improved adhesion to substrates. The 48 x 120 inch sheet size and grade 85, 0.040 inch (1.0 mm) construction give installers a large, consistently thick panel that fits standard laminate fabrication methods. For vertical interior applications that call for a metal appearance integrated into woodworking or surfacing workflows, this Deco Metal laminate provides a defined format and structure for planning panels and wall faces.
Sold In: 1 Sheet