Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Freud 42-100 flush trimming bit is a router bit from Freud Tool designed for trimming laminate counter tops and doing pattern work, so it handles typical countertop and template jobs in a straightforward, predictable way. The trimming cutout bearing flush trim design lets the bearing follow the surface or template while the cutting edges stay aligned, which helps keep edges straight when you are running along a guide. As a router bit in the straight mortising category, it removes material along a straight path, which suits edge clean-up and pattern routing where you want the profile to follow an existing shape. The 3/8 inch size and 1/4 inch shank give a compact cutting profile on a common shank diameter, supporting use in many hand-held or table-mounted portable routers that accept this shank size. The manufacturer part number 42-100 ties this specific geometry and application to Freud Tool documentation and job planning.
The 1/4 inch shank on this Freud Tool 42-100 bit fits router collets designed for that diameter, so the bit seats securely when the collet is tightened for routing laminate or pattern edges. Being intended for use on hand-held and table-mounted portable routers, it adapts to benchtop routing or on-site hand routing, which lets you handle counter tops or templates either on a table or directly on installed work. The trimming cutout bearing flush trim design supports bearing-guided passes, so the setup focuses on setting depth and aligning the bearing to the laminate or template edge. Because it is described for trimming laminate counter tops and pattern work, it is oriented toward passes that follow an established reference surface, which simplifies bit positioning and cut planning.
This 42100 flush trimming bit is described for trimming laminate counter tops, so it fits tasks where laminate overhang needs to be cut back to the substrate edge in a controlled pass. The trimming cutout bearing flush trim configuration lets the bearing ride the substrate or template while the flutes cut the laminate or wood, which supports keeping the finished edge aligned with the core material. Because the bit is also described for doing pattern work, it applies well to template routing where a pattern defines the final shape, so repeated parts follow the same outline when the bearing follows the pattern. Its ability to cut composition materials, plywoods, hardwoods, and softwoods means the same tool can route laminate over particleboard, plywood edges, or solid wood edges, which keeps the workflow consistent when material types change on the same installation or fabrication job. The straight mortising class identity indicates that it removes material along straight paths, which favors routing operations tied to guides, fences, or fixed templates during cabinetry and countertop work.
This Freud Tool flush trim bit is described as a tool to rely on for a smooth, burn-free cut, which matters when exposed laminate or wood edges must be job-ready after routing with minimal sanding. The note that two flutes provide faster cutting shows that a two-flute version prioritizes feed speed, which can help move through long countertop edges or repeated parts efficiently. The statement that three flutes yield a superior finish highlights that a three-flute configuration emphasizes surface quality, which is helpful when routed edges will remain visible and you want a finer cut pattern. Because the bit is said to cut all composition materials, plywoods, hardwoods, and softwoods, the cutting geometry is oriented to clear chips from diverse materials, which supports steady feed without switching bits as you move between sheet goods and solid stock. Its intended use on hand-held and table-mounted portable routers means the same cutting characteristics apply whether you are routing parts flat on a router table or following vertical edges on assembled cabinetry, helping keep results consistent from shop setup to jobsite work.
The Freud 42-100 flush trimming bit is described for trimming laminate counter tops and doing pattern work, so it serves countertop edge cleanup and template-guided routing tasks.
This flush trim router bit is specified to cut composition materials, plywoods, hardwoods, and softwoods, covering typical sheet goods and solid wood used in cabinet and countertop projects.
The trimming cutout bearing flush trim design lets the bearing follow a substrate or template while the flutes cut, keeping the routed edge aligned with the reference surface.
The 1/4 inch shank means the bit fits routers with 1/4 inch collets, allowing solid clamping in hand-held or table-mounted portable routers described for this bit.
The description notes that two flutes provide faster cutting and three flutes yield a superior finish, so flute count influences cutting speed versus surface smoothness.
The bit is described for use on hand-held and table-mounted portable routers, so it functions in both benchtop and hand-held routing setups.
The Freud 42-100 flush trimming bit from Wurth Baer Supply combines a trimming cutout bearing flush trim design with a 3/8 inch profile and 1/4 inch shank, aligning with laminate counter top trimming and pattern work. Its ability to cut composition materials, plywoods, hardwoods, and softwoods fits varied shop and jobsite materials under one part number. For routing tasks that rely on bearing-guided passes on hand-held or table-mounted portable routers, this router bit offers a focused option for these described applications.
Sold In: 1 Each