Amana A.G.E. 10 Inch Plywood And Laminate Saw Blade

Amana A.G.E. 10 inch plywood and laminate saw blade is a circular saw blade from the A.G.E. Series designed for table and radial arm saws in woodworking shops. The 10 inch diameter layout pairs with a 5/8 inch arbor, so the blade fits saws built around that common spindle size. A 60 tooth Triple Chip Grind geometry shapes the cutting edge, so the blade keeps a controlled bite in plywood and single sided laminate. That triple chip grind pattern also works on hard, abrasive materials such as non ferrous metals, hardwoods and plastics, so one blade can handle mixed sheet goods in the same setup. The saw blade belongs to the table and radial arm category, so it aligns with fixed-station cutting rather than hand-held tools. The A.G.E. Series branding identifies it within Amana offerings, which helps match this MD10-601 part number to shop documentation.

Key Blade Details For Clean Laminate Cuts

• The 10 inch diameter defines the cutting circle, so the blade reaches through typical plywood and laminate panels on table and radial arm saws without overextending the machine.
• The 5/8 inch arbor sizing ties directly to common table and radial arm saw arbors, so the blade centers properly on the spindle for stable, predictable rotation.
• The 60 tooth count spreads many cutting edges around the rim, so each tooth removes a small amount of material and supports smooth cuts in plywood and single sided laminate.
• The Triple Chip Grind tooth pattern presents alternating chamfered and flat teeth, so the edge works against hard, abrasive materials such as non ferrous metals, hardwoods and plastics.
• The circular saw blade classification places it within table and radial arm use, so it suits stationary saw workflows in woodworking environments handling sheet materials.

Fit And Setup Details For MD10-601 Blade

The MD10-601 blade uses a 10 inch diameter, so installers can plan guard clearances and fence positions around that size on table and radial arm saws. The 5/8 inch arbor bore defines the center hole, so the blade indexes accurately on saws built for that spindle dimension. With its 60 tooth Triple Chip Grind layout, the blade contacts plywood and single sided laminate through many light cuts, so edges stay cleaner when panels move past the fence. That same Triple Chip Grind configuration interacts with non ferrous metals, hardwoods and plastics in a controlled way, so the cutting path stays consistent across different hard, abrasive materials. The circular saw blade design within the table and radial arm category aligns with fixed-table setups, so the blade operates where material is brought to the saw.

Using This A.G.E. Series Blade In The Shop

Where The MD10-601 Saw Blade Performs Best

This A.G.E. Series circular saw blade belongs to the table and radial arm class, so it is positioned for shop stations cutting sheet and panel goods. The 10 inch diameter works with saws sized for that blade class, so panel height and fence reach coordinate with the cutting arc. A 5/8 inch arbor hub defines the mounting interface, so any saw with that spindle dimension can hold the blade centered in the flange. The blade is specified for clean cuts in plywood and single sided laminate, so cabinet components and laminate-faced parts pass the tooth line with reduced tear at the surface. Its Triple Chip Grind geometry is described as perfect for hard, abrasive materials including non ferrous metals, hardwoods and plastics, so the same station can process different rigid stock without changing to a different blade type.

Details That Support Repeatable Sheet Good Results

The 60 tooth Triple Chip Grind pattern sets how the MD10-601 blade meets the work, so each tooth alternates between chamfered and flat forms as it moves through plywood or laminate. That geometry manages the cutting load on hard, abrasive materials, so teeth engage progressively rather than striking with a single, deep bite. The focus on clean cuts in plywood and single sided laminate shapes how installers guide panels along the fence, so edges leave the blade ready for follow-up cabinet or laminate work. Because the blade is in the A.G.E. Series and carries the MD10-601 part number, shops can track it in inventory against specific plywood and laminate cutting stations. The circular saw blade classification for table and radial arm saws defines its role, so the blade stays dedicated to fixed-saw operations where controlled feeds support consistent cut quality.

Common Questions About The MD10-601 Saw Blade

Selecting The MD10-601 For Plywood And Laminate

The MD10-601 A.G.E. Series circular saw blade combines a 10 inch diameter, 5/8 inch arbor, and 60 tooth Triple Chip Grind, so it targets clean cutting in plywood and single sided laminate on table and radial arm saws. Its Triple Chip Grind is specified as perfect for hard, abrasive materials such as non ferrous metals, hardwoods and plastics, so one blade can address varied sheet and rigid stock. For shops organizing blades by task, the MD10-601 part number and plywood and laminate focus help match this blade to panel processing stations.