Shepherd Hardware Products Rigid Caster With 2-1/2" Soft Rubber Wheel No Brake, Plate Mount 175lb Capacity - 9482

Rigid Caster With 2-1/2 Soft Rubber Wheel Use

Rigid caster with 2-1/2 soft rubber wheel describes the Shepherd Hardware Products plate mounted caster with a fixed/rigid plate design, so it tracks straight on carts, trucks, or fixtures where you want controlled linear movement. The caster is part of a plate mounted casters line, which suits applications that need a broad mounting surface to spread load and resist racking in service. A 175lb capacity rating identifies it as appropriate for medium duty use, supporting substantial loads without moving into heavy industrial territory. The truck caster description signals use on material handling trucks and similar rolling equipment where dependable rolling under load is important. The plate mount product class means the caster uses a plate interface rather than a stem, which matters wherever stability and resistance to side loading are priorities.

Key Plate Mount Caster Details For Buyers

• The fixed/rigid plate design locks the caster into a straight line path, which simplifies steering on dollies or trucks that only need forward and backward motion during use.
• The 2-1/2 inch wheel size keeps overall height compact, which helps when working under benches or racks where extra caster height would interfere with existing clearances.
• The truck caster classification highlights its role in material handling, so it suits shop carts and similar equipment that frequently move moderate loads around the workspace.
• The plate mount style spreads the load across the mounting plate, which supports stable rolling under side forces that often occur when starting, stopping, or turning equipment.

Plate Mounted Caster Fit And Installation Focus

The plate mount product class identifies how this caster attaches, using a mounting plate rather than a stem, so it interfaces with flat surfaces prepared for plate mounted casters. The rigid plate design means there is no swivel movement, which affects layout because each caster must be oriented so the wheel aligns with the intended travel direction. The 2-1/2 inch wheel dimension helps when determining mounting height relative to frames, shelves, or truck beds, allowing you to match ride height across multiple casters on a project. The 175lb capacity guides how many casters are used to support a given load while keeping each caster within its rated working range.

Using Shepherd 9482 Casters In Real Workflows

Where This Plate Mounted Truck Caster Fits

The Shepherd Hardware Products rigid caster with 2-1/2 inch wheel and plate mount design fits material handling setups where straight-line tracking is preferred over swiveling, such as fixed-direction trucks. The truck caster designation points to use on shop or warehouse trucks that move medium loads routinely, so it suits woodworking or fabrication environments supported by Wurth Baer Supply products. Being part of the plate mounted casters category ties it to flat mounting surfaces on carts and fixtures, which is common on fabricated steel frames and wood bases. The 175lb capacity rating gives it a role in moderate duty equipment, so it aligns with applications that need dependable movement without stepping up to heavy industrial casters.

Details That Support Consistent Movement And Protection

The caster offers two wheel types, soft rubber and polypropylene, which allows selection between quiet floor-friendly rolling and wheels suited for water and chemical resistance with maximum mobility. Medium soft rubber wheels provide quiet movement, which matters in shops where noise control improves working conditions during frequent cart use. The same medium soft rubber wheels provide maximum floor protection, which benefits finished floors in woodworking or assembly areas where marking and damage are concerns. The polypropylene option is primarily used for water and chemical resistance, so it supports carts in environments where exposure to liquids or chemicals is part of daily workflow. Polypropylene also supports maximum mobility applications, which helps when casters must roll with low resistance under load. Both wheel types feature a heavy zinc plate finish on the caster, giving a lustrous appearance that keeps equipment looking professional in customer-facing or organized shop spaces. The heavy zinc plate also provides corrosion resistance, which matters in humid or demanding shop conditions where hardware is exposed to the air over time. The web description notes non-marking br, tying performance to floor appearance where preserving surface look is part of facility standards during repeated rolling cycles.

Common Questions About This Shepherd Rigid Caster

Selecting This Plate Mount Caster For Your Project

The Shepherd Hardware Products rigid caster with 2-1/2 inch wheel, 175lb capacity, and plate mount design offers a focused option for medium duty carts, trucks, and fixtures. The choice between medium soft rubber wheels for quiet, floor-protecting movement and polypropylene for water and chemical resistance lets you match wheel performance to the working environment. The heavy zinc plate finish adds corrosion resistance and a clean look that fits professional shop setups. For projects using plate mounted casters in this duty range, this truck caster aligns with applications that need controlled straight-line rolling and dependable load handling.