Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitional Advantage Three pull brings a 3-3/4 inch center to center layout that sets consistent handle spacing across cabinet doors and drawers, which matters when aligning multiple fronts in a kitchen or shop-built installation. The pull is part of the Advantage Series from Berenson Corporation, establishing a defined style family when matching other handles from the same collection. Its brushed nickel finish provides a muted metallic look that supports a transitional aesthetic between traditional and contemporary casework. Zinc die cast construction gives the pull a solid metal body, which supports a substantial feel when opening heavier drawers. A total length of 5 inches means the pull extends slightly beyond the screw centers, giving fingers extra grab area without dominating standard cabinet rail widths. The 0992-1BPN-P manufacturer part number clearly identifies this exact size, finish, and style for repeat ordering or project spec lists.
The 3-3/4 inch center to center measurement defines where to drill mounting holes, which lets installers set up jigs or boring patterns that repeat cleanly across a full bank of cabinets. With a 5 inch length, the pull overhangs the mounting points at each end, which centers the grip nicely on typical drawer rails and stiles. A projection of 1-3/16 inch pushes the gripping surface away from the cabinet face, which improves knuckle clearance when someone pulls at an angle. The 9/16 inch width keeps the profile slim, which is useful where fronts are narrow or set close together. A base diameter of 1/2 inch concentrates the mounting footprint, which helps the pull sit neatly over standard drilled holes without crowding adjacent edges.
This brushed nickel pull from the Advantage Series works as a handle for doors and drawers where a 3-3/4 inch center to center pattern is already planned or installed, which suits both new cabinet builds and hardware refresh work using that layout. The 5 inch overall length lets the pull span a reasonable portion of typical drawer fronts, which helps hardware look deliberate rather than undersized on common kitchen or bath cabinets. Because the pull belongs to Berenson Corporation's Advantage Series, it ties into a recognizable collection identity, which helps maintain visual continuity across multiple rooms or banked casework using the same series. The zinc die cast construction gives the handle a solid metal feel, which supports confident opening on everyday-use drawers in residential or light commercial spaces. Its brushed nickel finish coordinates with many contemporary hinge and faucet finishes, which allows this pull to serve as a linking element between different metal tones in the same room.
The 3-3/4 inch (95 mm) center to center measurement provides a fixed reference for drilling, which helps installers align rows of hardware using templates or measuring systems built around that spread. A projection of 1-3/16 inch defines how far the pull sits off the face, which matters when aligning with neighboring handles so that all grips feel the same as users move along a run of cabinets. The narrow 9/16 inch width gives a lean front profile, which helps multiple pulls sit close on smaller drawer stacks without visually crowding the panel. A 1/2 inch base diameter creates a compact contact point at each end, which helps the pull seat cleanly over 8-32 tapped holes or inserts sized to match. The specific manufacturer number 0992-1BPN-P ties these dimensions and the brushed nickel finish together under one identifier, which aids in reordering the same pull for future phases or service replacement.
The Berenson Transitional Advantage Three pull has a 3-3/4 inch (95 mm) center to center dimension, which sets the exact spacing for drilling mounting holes on cabinet doors and drawers.
The pull has a 5 inch overall length, which provides extra grip area beyond the 3-3/4 inch mounting spread and helps the handle look proportionate on standard cabinet fronts.
The 0992-1BPN-P pull is made from zinc die cast material, which creates a solid metal body suited to frequent opening and closing of doors and drawers.
The pull has a brushed nickel finish, which delivers a soft metallic appearance that coordinates with many hinges, faucets, and appliance trims in cabinet installations.
The brushed nickel pull projects 1-3/16 inch from the cabinet face, which provides comfortable finger clearance behind the handle during everyday use.
The pull has a 9/16 inch width and a 1/2 inch base diameter, which keep the profile slim while providing a neat mounting footprint on cabinet surfaces.
The Berenson brushed nickel cabinet pull with 3-3/4 inch center to center spacing pairs a 5 inch length with zinc die cast construction, which suits projects that rely on a consistent drilling pattern and a solid-feeling handle. Its brushed nickel finish and defined dimensions help match existing layouts or plan new cabinet runs with predictable results. For work calling for a transitional look within Berenson's Advantage Series, this 0992-1BPN-P pull offers a clearly specified option ready to be added to project takeoffs and job schedules.
Sold In: 1 Each
