Description
Markham Double Prong Robe Hook For Bath Use
Markham double prong robe hook is a bath hardware hook from Amerock Corporation designed for hanging robes or towels in a bath or powder room. The traditional design aesthetics provide a familiar look that fits projects calling for classic styling in residential bath layouts. An oil-rubbed bronze finish defines the surface appearance, giving a dark tone that visually anchors the hook against many wall colors used around vanities and showers. The Markham collection provides crisp, linear definition, so the lines of the hook read cleanly when aligned with other straight-edged trim pieces. Square footing at the base is inspired by architectural details of columns and pilasters, which ties the hook visually to other squared millwork in the room. The hook complements a variety of Amerock cabinet hardware and has suggested coordination with the Amerock Manor collection for consistent bath hardware styling.
Key Markham Double Prong Robe Hook Details
- The overall length of 3-2/7 inches defines how far the Markham robe hook extends along the wall, helping position it between other bath hardware pieces where linear spacing is important.
- The overall width of 2-3/8 inches sets the lateral footprint of the double prong robe hook, which helps when laying out hooks on narrow wall sections or between vertical trim elements.
- The projection of 2-2/9 inches indicates how far the robe hook stands off the mounting surface, providing working clearance for hanging robes or towels without crowding adjacent walls or cabinetry.
- The oil-rubbed bronze finish of the Markham robe hook establishes a dark, traditional tone, supporting bath or powder room designs that favor warm, classic metal finishes across hardware.
- The Markham collection design language, with crisp linear definition and square footing, allows the robe hook to visually align with architectural details such as columns and pilasters in a bath space.
Installation Dimensions And Bath Layout Planning
The overall length of 3-2/7 inches on the Markham robe hook gives a clear dimension for planning horizontal spacing between multiple hooks on a bath or powder room wall. The 2-3/8 inch overall width helps when laying out the hook on narrow stiles or between vertical trim, because the width defines the minimum clear area required for mounting. Projection of 2-2/9 inches sets how far the hook stands off the wall, which matters when locating it behind doors or near cabinetry where clearance is limited. The square footing at the base creates a defined contact area against the wall surface, which supports a stable appearance when aligned with other square-backed bath hardware pieces.
Using This Amerock Bath Hardware In Projects
Where The Markham Robe Hook Fits In The Bath
The Markham robe hook is part of the Amerock bath hardware class, which positions it for use in baths and powder rooms where coordinated metal finishes are specified. Traditional design aesthetics let the hook fit into projects that use classic trim details or paneled millwork, because its square footing echoes the lines of columns and pilasters. The 3-2/7 inch overall length places the double prong robe hook in a compact category, so it can be located on short wall runs beside vanities or near shower entries. With a 2-2/9 inch projection, the hook provides functional hanging depth for robes or towels while staying relatively close to the wall, which is useful along narrow circulation paths in smaller powder rooms. The oil-rubbed bronze finish can be used as a unifying accent when other Amerock cabinet hardware with similar tones is installed in the same room.
Why Markham BH26512ORB Details Support Consistency
The manufacturer part number BH26512ORB identifies this specific Markham robe hook configuration, which helps keep bath hardware selections consistent when ordering for multi-bath projects. Being part of the Markham collection means the robe hook follows the same crisp, linear definition and square base footing as related pieces, so the linework stays visually aligned across the room. Suggested coordination with the Amerock Manor collection lets installers and designers tie this bath hardware to cabinet hardware from Amerock, maintaining a related style language between doors, drawers, and wall-mounted hooks. The defined dimensions - 3-2/7 inch length, 2-3/8 inch width, and 2-2/9 inch projection - support repeatable layout from room to room, because these fixed sizes make hook placement predictable on drawings and in the field. As bath hardware in the builders hardware category, the piece suits professional workflows where consistent part identification, from BH26512ORB labeling through to installation, reduces selection errors.
Common Questions About Markham BH26512ORB Hook
What type of hook is the Markham BH26512ORB?
The Markham BH26512ORB is a double prong robe hook from Amerock Corporation, used in bath hardware layouts for hanging robes or towels on a wall surface.
How large is this oil rubbed bronze robe hook?
The Markham robe hook has an overall length of 3-2/7 inches, an overall width of 2-3/8 inches, and a projection of 2-2/9 inches, which defines its working footprint on the wall.
Where is the Markham robe hook typically used?
The Markham robe hook is described for use in a bath or powder room, where it functions as bath hardware within the Amerock Markham collection design family.
What design style does the Markham collection support?
The Markham collection uses traditional design aesthetics with crisp, linear definition and square footing inspired by columns and pilasters, fitting classic bath or powder room designs.
How does this robe hook coordinate with other Amerock pieces?
The Markham robe hook complements various Amerock cabinet hardware, with suggested coordination to the Amerock Manor collection for a unified hardware appearance.
What is the finish on the BH26512ORB robe hook?
The BH26512ORB Markham robe hook has an oil-rubbed bronze finish, establishing a dark, traditional metal tone across the visible bath hardware surface.
Selecting This Markham Robe Hook For Your Job
The Markham double prong robe hook gives installers and designers a defined set of dimensions and a clearly identified style for bath hardware work. With 3-2/7 inch length, 2-3/8 inch width, and 2-2/9 inch projection, the hook occupies a compact space that fits many bath or powder room wall conditions. Traditional design aesthetics and square footing connect visually with architectural details and other Amerock hardware, offering a coordinated look when planning hardware schedules. For projects calling for an oil-rubbed bronze bath hardware hook with a consistent Amerock part number, BH26512ORB provides a clearly specified option.
