Berenson Advantage Plus Two Antique Silver 1-1/8" (29 mm) Diameter Knob, 0925-1BPN-P

Berenson Advantage Plus Knob For Cabinets

Berenson Advantage Plus knob describes a zinc die cast cabinet knob from Berenson Corporation that is part of the Advantage Series, so it gives you a defined product line and brand to match across a project. The 1-1/8 inch diameter head creates a comfortable grip point on doors or drawers, which helps with consistent pulls on everyday-use cabinetry. A 1 inch projection sets the knob off the face of the cabinet, giving hand clearance while keeping the profile compact for tight runs. The base measures 5/8 inch, so it seats on the cabinet surface with a small footprint that works well on narrow rails or stile locations. The brushed nickel finish provides a muted metallic look that coordinates with other brushed nickel decorative hardware, simplifying visual alignment on kitchens, baths, or built-in storage.

Key Advantage Series Knob Details For Projects

• The 1-1/8 inch diameter knob size concentrates pulling force in the center of a cabinet front, which supports repeatable opening effort on doors and drawers across a run.
• The 1 inch projection establishes a consistent stand-off from the cabinet face, giving fingers space to pull while helping keep hardware from catching on clothing along walkways.
• The 5/8 inch base dimension keeps contact to a tight circle at the mounting point, which is useful when positioning knobs on narrow rails or small drawer fronts.
• The brushed nickel finish ties this knob to other brushed nickel decorative hardware, making it straightforward to carry one finish through a full room layout.
• The zinc die cast material defines the knob as a metal component, which supports a solid feel at the touch point compared to many non-metal cabinet pulls.
• The 8-32 x 1 inch screw size specification aligns the knob with a common cabinet mounting thread, which fits standard drilled pulls on many cabinet constructions.

Cabinet Knob Fit, Size, And Mounting Details

This 1-1/8 inch diameter Advantage Series cabinet knob is specified with a 1 inch projection, so the center of the grip stands out from the cabinet face at a predictable distance during layout. That projection figure helps when aligning this piece with other hardware styles that share similar stand-off depths. The base width at 5/8 inch focuses the load around the single mounting point, which suits typical cabinet door and drawer front thicknesses using a single 8-32 x 1 inch screw connection. The 1-1/8 inch width creates a balanced proportion on many standard drawer fronts, giving the installer a known reference size when planning knob placement across upper and lower cabinets.

Using This Berenson Brushed Nickel Knob In Work

Where This 1-1/8 Inch Knob Performs Best

This Berenson Advantage Series cabinet knob sits in the Decorative Hardware & Moldings category, so it is oriented to visible locations such as kitchens, baths, and built-in casework. The 1-1/8 inch diameter gives a usable grip on typical cabinet doors and drawer fronts, helping occupants open fronts without needing oversized hardware. The 1 inch projection also supports use on face-frame or frameless cabinets where aisles are tight, because the knob does not extend excessively into the walkway. The 5/8 inch base dimension suits placement on rails or narrower stiles, where larger rosettes could crowd panel details or edges. With a brushed nickel finish, the knob aligns well with projects that already specify brushed nickel decorative hardware, helping maintain a continuous visual theme around appliances, plumbing trim, and other fittings.

Details That Support Consistent Cabinet Results

The zinc die cast material used on this knob establishes it as a metal component, giving a defined weight and touch at the primary contact point on doors and drawers. That metal construction pairs with the 1-1/8 inch head diameter to give a clear, centered pulling surface, which benefits repeated use in higher-traffic cabinets. The 1 inch projection keeps the knob position predictable off the face of the cabinet, allowing hardware lines to stay visually even when lined up with other pulls at the same stand-off. The specified 8-32 x 1 inch screw thread and length create a known attachment standard, which fits conventional cabinet drilling that expects this thread size. Together, the diameter, projection, base dimension, and finish work as a matched set of measurements, so installers can plan knob spacing and alignment across doors and drawers with consistent results from piece to piece.

Common Questions About This Berenson Cabinet Knob

Select This Knob For Sized, Finish-Matched Cabinets

The Berenson Advantage Plus Two Series brushed nickel cabinet knob delivers a 1-1/8 inch diameter, 1 inch projection, and 5/8 inch base, tying together size and footprint for everyday cabinets. With zinc die cast construction and a brushed nickel finish, it fits projects that call for metal decorative hardware in this specific look. When a run of cabinets needs a consistent knob size and a defined brushed nickel appearance, this 0925-1BPN-P model provides those stated dimensions and finish for layout across doors and drawers.