Berenson Advantage Plus Two 3" (76 mm) Center to Center Brushed Nickel Pull, 0973-1BPN-P

Berenson Advantage Plus Two Pull For Cabinets

Berenson Advantage Plus Two pull is a zinc die cast cabinet handle in a brushed nickel finish, so it provides a consistent look for cabinet doors and drawers in kitchens, baths, or shop-built projects. The 3 inch center to center drilling matches a common layout, which simplifies planning when aligning multiple pulls across a run of doors or drawer fronts. Overall length of 3-3/8 inches gives some overhang past the screw holes, which helps cover minor layout variation around the mounting points. A projection of 1-3/16 inches sets the working grip depth from the cabinet face, which influences how easily fingers catch the pull on thicker doors or drawer fronts. Width of 1/8 inch defines the front profile, which affects the visual line across the cabinet and the feel under the hand during frequent use.

Key Details Of This Brushed Nickel Pull

• The zinc die cast material defines the core of the pull, which provides a uniform part shape that is consistent from piece to piece when you are running multiple cabinets on the same job.
• The brushed nickel finish sets the surface appearance, which lets the pull coordinate with other brushed nickel decorative hardware and helps create a unified look across a room.
• The 3 inch center to center dimension controls the hole spacing, which matters when matching existing drilled cabinet fronts or using jigs set up for standard 3 inch on-center hardware.
• The 3-3/8 inch overall length determines the visible footprint, which helps when laying out pulls on narrow or wide rails where edge clearances and symmetry are important.
• The 1-3/16 inch projection defines how far the pull stands off the surface, which affects both hand clearance during everyday operation and how far the hardware extends into walkways or tight spaces.
• The base dimensions of 3/8 inch at each mounting point describe the bearing area on the cabinet face, which influences how the load from opening and closing is spread on painted or veneered surfaces.

Mounting And Fit For Cabinet Installations

The 3 inch center to center measurement sets the exact drilling layout, so jigs or CNC programs set for 3 inch on-center pulls drop directly onto this part without layout changes. A length of 3-3/8 inches positions the ends slightly beyond the mounting holes, which can help visually center the pull on narrower stiles or drawer fronts while still landing the fasteners in sound material. Projection of 1-3/16 inches locates the gripping surface forward from the door, which influences how the pull clears decorative edge profiles or applied moldings near the mounting area. The 1/8 inch width defines the slim front bar, which can matter on doors with detailed profiles where a larger pull might crowd raised panels or applied trim.

Using This Berenson Pull In Real Projects

Where This Brushed Nickel Cabinet Pull Fits Best

This Berenson Advantage Plus Two Series pull uses a brushed nickel finish, which aligns with projects that already specify brushed nickel decorative hardware on cabinets or built-ins. The 3 inch center to center spacing matches a frequently used standard, which fits cabinets that are drilled for that size in both new and replacement situations. Its overall 3-3/8 inch length works on many face frame or frameless cabinet styles where rail heights allow a compact pull, which is helpful on smaller drawers or narrow door rails. The zinc die cast construction establishes a solid, consistent form, which serves jobs that repeat the same pull across many openings so the look stays uniform from one cabinet to the next. A projection of 1-3/16 inches sets a functional standoff, which aligns with applications where a moderate pull depth suits typical hand clearance without dramatically projecting into small rooms or tight corridors.

Details That Support Repeatable Cabinet Installations

The 3 inch center to center drilling gives an exact, repeatable measurement, which is useful when using boring jigs or templates that are already set up for 3 inch pulls across a bank of cabinets. The 8-32 x 1 inch screw size defines the thread and length, which matters when selecting compatible machine screws for typical cabinet front thicknesses. Base dimensions of 3/8 inch at each mounting point provide a known footprint, which helps position the pull so the bases sit fully on flat sections of the stile or drawer front without overhanging profiled edges. The 1/8 inch width sets a narrow bar profile, which allows tight visual spacing when multiple pulls are aligned on stacked drawers or adjacent doors. The brushed nickel finish from the Advantage Plus 2 collection provides a coordinated appearance, which supports projects where all visible pulls are drawn from the same series to keep finish and style consistent from cabinet to cabinet.

Common Questions About This Berenson Cabinet Pull

Select This Pull For Brushed Nickel Cabinet Runs

The Berenson Advantage Plus Two pull in brushed nickel combines zinc die cast construction with a 3 inch center to center layout, so it suits cabinet projects calling for coordinated hardware across multiple openings. With a 3-3/8 inch length and 1-3/16 inch projection, it fits common cabinet rail sizes while providing practical hand clearance. Using this 0973-1BPN-P pull on doors and drawers that share the same drilling pattern keeps the visual line consistent, which supports clean, repeatable cabinet installations.