Berenson Advantage Two Oiled Bronze 1-1/8" (28.5 mm) Diameter Knob, 0929-1OB-P

Berenson Advantage Two Knob For Cabinet Projects

Berenson Advantage Two knob is a round cabinet knob designed for cabinetry and similar decorative hardware applications, so it gives doors and drawers a consistent grab point that aligns with other Berenson hardware on the job. The 1-1/8 inch diameter head creates a defined pull area, which helps users locate and operate smaller fronts without slipping. Its zinc die cast construction forms a solid, uniform body, which supports repeatable drilling layouts when the same knob is used throughout a room. The oiled bronze finish establishes a specific color and sheen, which helps installers coordinate with hinges, pulls, and other bronze-finished components in a run. A 1 inch projection sets the knob off the surface, which creates finger clearance while keeping the hardware close enough for tight walkways or interior cabinet spaces.

Key Advantage Series Knob Details For Jobs

• The 1-1/8 inch (28.5 mm) diameter head defines a clear grip area, which helps users grab doors and drawers with a consistent feel across multiple fronts.
• The 1 inch projection positions the knob away from the face frame or panel, which provides room for fingers while keeping hardware from protruding excessively.
• The oiled bronze finish matches other oiled bronze decorative hardware, which simplifies visual coordination across hinges, pulls, and knobs in the same space.
• The zinc die cast material creates a rigid knob body, which supports stable fastening and predictable performance when installed on standard cabinet substrates.
• The base dimension of 19/32 inch sets the footprint on the door or drawer, which helps cover the drilled hole cleanly and defines the bearing surface against the wood.

Cabinet Knob Sizing And Mounting Fit Details

The 1-1/8 inch diameter on this Berenson cabinet knob sets a familiar scale for residential and light commercial cabinets, which helps layouts look balanced on both narrow and wider fronts. Its 1 inch projection defines how far the knob stands off the face, which keeps hands clear of moldings or adjacent fronts when operating doors. The 19/32 inch base dimension determines the contact area against the surface, which helps distribute load around the mounting point on typical cabinet materials. The knob uses an 8-32 threaded interface noted in the screw size detail, which matches common cabinet drilling practices for this hardware style.

Using This Berenson Knob In Real Projects

Where This Oiled Bronze Knob Works Best

This Berenson Advantage Two Series knob belongs in projects where a 1-1/8 inch diameter round pull fits the cabinet scale, which suits many kitchen, bath, and built-in storage layouts using standard door and drawer sizes. The oiled bronze finish supports installations that rely on bronze-toned decorative hardware, which helps create a unified appearance when paired with similar colored hinges and pulls. The zinc die cast construction suits cabinetry that benefits from a solid-feeling knob, which is useful when occupants operate doors and drawers frequently across a room. Its defined base dimension of 19/32 inch works in layouts where the mounting footprint needs to remain compact, which is helpful on narrow rails and smaller drawer fronts.

Details That Support Consistent Cabinet Results

The specified 1 inch projection helps installers plan drilling locations relative to adjacent hardware, which reduces interference when doors swing past neighboring pulls or trim. The 1-1/8 inch diameter head provides a known reference point for spacing knobs along drawer widths, which supports visually even layouts in banks of cabinets. The stated 8-32 screw size alignment allows use with standard cabinet through-bore practices, which streamlines installation when switching among Berenson knobs using the same screw thread. The zinc die cast body offers a uniform substrate beneath the oiled bronze finish, which helps the color read consistently from knob to knob under typical interior lighting. Together, these defined dimensions and materials let installers repeat the same mounting approach from cabinet to cabinet, which supports faster layout work and a uniform finished look across the project.

Common Questions About This Berenson Cabinet Knob

Select This Knob For Matching Bronze Cabinets

This Berenson Advantage Two Series oiled bronze knob combines a 1-1/8 inch diameter, 1 inch projection, and zinc die cast construction, so it fits standard cabinet scales with a solid feel. When a project calls for coordinated oiled bronze decorative hardware, this knob provides defined dimensions and finish details that support consistent layouts across multiple doors and drawers.