Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Advantage Series pull gives you a traditional cabinet handle with a defined 3 inch center to center size, so hole boring stays straightforward on new work or replacement jobs. The zinc die cast material creates a solid metal pull that resists everyday cabinet use in kitchens, baths, or shop-built casework. Its oil rubbed bronze light finish provides a dark, warm tone that visually suits traditional door and drawer designs while keeping a consistent look across a run of cabinets. The pull length of 5-1/8 inches spans comfortably across standard drawer fronts, giving fingers space to grab without crowding the panel edge. A projection of 7/8 inch sets the gripping surface off the face of the cabinet, helping hands clear door profiles. The 3/4 inch width offers a balanced feel in the hand while keeping the look slim on narrow rails and stiles.
The 3 inch center to center measurement sets the distance between the mounting points, so drilling or boring can follow a standard 76 mm pattern across cabinets. With a base dimension of 1-5/8 inches at each end, the pull covers a practical area around each fastener, which helps visually frame the mounting points on the door or drawer front. The 7/8 inch projection defines how far the handle stands off the surface, which guides placement when working near adjacent doors, wall returns, or appliance panels. A 3/4 inch width keeps the footprint slim, so you can position the pull comfortably on narrow drawer fronts or small doors without crowding edge profiles. The overall 5-1/8 inch length helps center the pull visually on medium-width fronts, aiding consistent alignment during layout.
This traditional cabinet pull falls in the Handles and Pulls category and is identified as PULL 3' CC TRADITIONAL, so it aligns well with standard cabinet door and drawer layouts using a 3 inch spacing. The 5-1/8 inch length allows it to sit proportionally on typical base and wall cabinet fronts, making it a practical choice for runs of kitchen or bath cabinetry. Its 3/4 inch width lets the pull sit neatly on narrow face frame rails or slab drawer fronts without overlapping decorative edges, which is useful in built-ins or smaller vanity cabinets. The oil rubbed bronze light finish suits projects built around darker metal hardware tones, helping carry the same look across all exposed pulls on a job. The Berenson Advantage Series designation ties it to a defined collection, which supports consistent style when selecting additional pulls of similar design.
The fixed 3 inch center to center dimension simplifies repetitive drilling, so jigs or templates set for 76 mm spacing can be used from cabinet to cabinet without adjustment. With bases measuring 1-5/8 inches, the pull covers the area immediately around each hole, which helps present a clean look on finished painted or stained faces. The 7/8 inch projection keeps the gripping point away from the cabinet surface, supporting comfortable hand clearance during frequent door and drawer use. A 3/4 inch width limits how much space the pull occupies on the face, which helps maintain even reveals when setting multiple pulls close to edges or between drawer stacks. The zinc die cast construction gives the pull a consistent form from piece to piece, supporting uniform alignment and appearance across a full run of cabinets in the same room.
The Berenson Advantage Series pull has a 3 inch center to center measurement, so drilling can follow a common 76 mm pattern used across many cabinet door and drawer layouts.
The pull length is 5-1/8 inches, which gives a wider gripping area and helps it sit proportionally on standard cabinet doors and drawer fronts.
This cabinet pull has a 7/8 inch projection, setting the handle off the face so fingers can wrap behind it and reducing contact with the cabinet surface.
The pull width is 3/4 inch, keeping the profile compact so it fits well on narrow rails or smaller drawer fronts without crowding decorative edges.
The 0977-1ORBL-P pull is made from zinc die cast, providing a solid metal body suitable for repeated opening and closing of cabinet doors and drawers.
This Berenson cabinet pull has an oil rubbed bronze light finish, giving it a dark, warm appearance that coordinates with traditional style cabinet hardware.
The Berenson Advantage Series pull with 3 inch center to center sizing, 5-1/8 inch overall length, and 7/8 inch projection gives you defined dimensions for cabinet layouts using traditional styling. Its zinc die cast construction and oil rubbed bronze light finish support everyday cabinet use while delivering a coordinated look across doors and drawers. When a project calls for a traditional handle in the Handles and Pulls class with these specific measurements, this 0977-1ORBL-P model from Berenson Corporation offers a clear fit for consistent cabinet hardware planning.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BQ0936-10B-P Mfr# 0936-1OB-P | Berenson Advantage Two Oiled Bronze 1-5/16" (33 mm) Diameter Knob, 0936-1OB-P | ||||
Sold in: 1 Each |  BQ0932-1ORBL-P Mfr# 0932-1ORBL-P | Berenson Advantage Two Oiled Bronze 3/4" (19 mm) Diameter Knob, 0932-1ORBL-P |
