Berenson Advantage Two Knob For Cabinet Projects

Berenson Advantage Two knob in Antique Pewter is a 1-5/16 inch diameter cabinet knob that provides a defined hand grip for doors and drawers, which supports consistent use on frequently opened cabinets in shops, kitchens, and work areas. The knob is part of the Advantage Series from Berenson Corporation, so it aligns with other pieces in the same collection when a project calls for a unified decorative hardware look across multiple fronts. The knob is made from zinc die cast, which creates a solid, dense feel in the hand and supports repeatable performance when mounted on cabinet doors or drawer fronts that see daily opening and closing. The Antique Pewter finish on the zinc die cast body gives a muted, low-glare appearance, which can help visually tie together face frames, doors, and drawer heads where a softer metallic tone is preferred.

Key Details Of This Antique Pewter Knob

• The 1-5/16 inch (33 mm) diameter spreads the pulling load across a wider area, which helps reduce concentrated stress on the cabinet face during repeated use on heavier doors and drawers.
• The knob projection of 1 inch establishes a predictable hand clearance from the cabinet surface, which supports a comfortable pinch or three-finger grip while limiting how far the knob stands into the aisle or work path.
• The base dimension of 11/16 inch defines the footprint against the cabinet front, which helps cover a typical drilled hole cleanly and creates a stable bearing surface when the knob is tightened down.
• The knob width of 33 mm matches its diameter, which keeps the profile consistently round so installers can position it without needing to orient a specific edge or face during layout.
• The Antique Pewter finish is specified for this knob, which provides a specific color and sheen target when coordinating with hinges, pulls, or other decorative hardware in the same space.
• The Manufacturer Part 0933-1AP-P identifies this exact Advantage Two Series knob, which helps match existing installations or repeat the same model across multiple cabinet runs on a job.

Installation Dimensions And Screw Interface Details

This 1-5/16 inch diameter Berenson Advantage Two knob uses an 8-32 x 1 inch screw size, which defines the machine thread and shank length that mates with the internal thread of the knob during mounting. The 1 inch projection distance from the cabinet face offers a known stand-off, which supports consistent layout when aligning this knob with other hardware pieces on a door or drawer. The 11/16 inch base dimension specifies the bearing circle that contacts the cabinet front, which helps installers understand coverage around the drilled hole as they plan spacing on narrow stiles or rails. With a width of 33 mm matching the stated diameter, the installer can drill the mounting hole at layout marks and know the knob will present a uniform round profile in any rotational position.

Using This Zinc Die Cast Knob In Workspaces

Where The 33 mm Knob Works Best

The Advantage Series cabinet hardware designation places this Berenson knob in the decorative hardware and moldings category, which suits applications on cabinet doors and drawers that need both grip and finished appearance. The 33 mm diameter provides enough surface area for fingers, which helps when opening wider doors or deeper drawers that can resist movement under load in woodworking or storage environments. Its Antique Pewter finish gives a distinct tonal option within decorative hardware, which is useful when matching existing Antique Pewter hinges or other Berenson pieces in the same area. Because the knob comes from the Berenson Corporation Advantage Two Series, it can be used across a full cabinet run where a consistent style is specified from room to room or between upper and lower cabinets.

Details That Support Repeatable Installation Results

The zinc die cast material of this Berenson Advantage Two knob provides a rigid body around the 8-32 threaded insert, which supports firm tightening of the 8-32 x 1 inch screw without deforming the knob during installation. The 1 inch projection pairs with the 1-5/16 inch diameter to create a balanced lever arm, which helps the knob resist rocking on the cabinet face when users pull at various angles. The 11/16 inch base dimension centers the load where the knob meets the cabinet, which supports solid contact against the surface once the screw is fully tightened through the door or drawer front. With width and diameter both specified as 33 mm, the installer can position this knob at layout marks, tighten it down, and expect a symmetrical round appearance that simplifies visual alignment across a row of doors or drawers.

Common Questions About This Berenson Knob

Select This Knob For Antique Pewter Cabinet Runs

The Berenson Advantage Two Series Antique Pewter 1-5/16 inch diameter knob combines zinc die cast construction, 1 inch projection, and a defined 11/16 inch base dimension to support consistent cabinet layouts. Using the 8-32 x 1 inch screw size, installers can tie this 0933-1AP-P knob into cabinet doors and drawers wherever an Antique Pewter, 33 mm round pull point is specified.