Berenson Transitional Advantage Three Series 2-1/2" (64 mm) Center to Center Polished Chrome Cup Pull, - 0961-126-P
Description
Berenson Advantage Series Cup Pull For Cabinets
Berenson Advantage Series cup pull gives you a 2-1/2 inch (64 mm) center to center mounting layout, which matches common cabinet drilling patterns so you can line up handles cleanly across doors and drawers. The cup pull is made from zinc die cast material, providing a solid metal construction that supports everyday cabinet and drawer use in residential or shop environments. A polished chrome finish on the pull delivers a bright, reflective surface that ties in with other chrome fittings, helping you keep a consistent look across a full run of cabinetry. Overall length of 3-1/8 inches keeps the pull compact, which is useful on narrower drawer fronts where space is tight. A projection of 1 inch creates hand clearance off the face of the door or drawer, so fingers can catch the edge of the cup easily. Width of 1-1/16 inches gives the pull a defined front profile that stands out clearly for quick grabbing.
Key Cup Pull Details For Cabinet Projects
- The 2-1/2 inch (64 mm) center to center dimension provides a standard mounting span, which simplifies layout on new cabinets and helps match existing drilled holes when swapping older pulls.
- The 3-1/8 inch overall length keeps the pull proportionate to small and medium drawer fronts, so you can run multiples in a bank of drawers without overcrowding the faces.
- The 1 inch projection holds the gripping edge away from the cabinet surface, giving fingers enough room to reach under the cup and pull without scraping knuckles on the door or drawer front.
- The 1-1/16 inch width sets a comfortable front-to-back cup depth, creating a defined pocket that is easy to locate by feel when operating drawers from different angles.
- The polished chrome finish pairs with other chrome cabinet components, supporting a unified appearance across hinges, knobs, and pulls on a single installation.
- The zinc die cast construction delivers a one-piece metal body, aiding consistent performance when the pull is installed across multiple high-use cabinet drawers.
Installation Dimensions For Berenson 0961-126-P Pull
The Berenson 0961-126-P pull uses a 2-1/2 inch (64 mm) center to center hole spacing, so drilling a straight pair of holes at this span sets the pull accurately on a drawer or door. With a 3-1/8 inch overall length, the pull overhangs the mounting span slightly at each end, which helps cover the edges of the drilled holes and gives some visual margin for minor alignment variation. The 1 inch projection determines how far the cup stands off the cabinet face, controlling how deep the cup pocket feels when gripping. At 1-1/16 inches wide, the pull has enough front surface to register consistently against the door or drawer front, supporting a firm mount across multiple pieces in a kitchen or shop run.
Using This Polished Chrome Cup Pull In Work
Where This Zinc Die Cast Cup Pull Fits Best
This zinc die cast cup pull falls under decorative hardware and moldings handles and pulls, so it is suited to cabinet doors and drawers in kitchens, baths, and built-ins that call for a visible handle. The 2-1/2 inch (64 mm) center to center measurement lines up well on face frame cabinets, frameless cabinets, and shop casework where this span is already laid out, which helps standardize drilling templates across multiple jobs. Because the pull length is 3-1/8 inches, it works neatly on smaller drawer fronts and cabinet doors, allowing several pulls to be spaced along a bank of drawers without crowding stile or rail joints. The polished chrome finish coordinates with chrome faucets, hinges, and other polished chrome cabinet hardware, so the pull can be used across an entire room to keep finishes aligned on every opening.
Why These Cup Pull Details Support Repeatable Results
The specific 64 mm center to center dimension on this cup pull lets installers repeat the same drilling pattern, which speeds up production when running multiple fronts through a jig. The zinc die cast material creates a consistent casting across each Berenson Transitional Advantage Three Series pull, helping the installer see uniform shapes and edges when lining several pulls on a tall cabinet bank. With a 1 inch projection and 1-1/16 inch width, the cup geometry stays the same from piece to piece, so hand clearance and grip feel do not change as you move from one drawer to the next. The polished chrome finish across the pull surface provides a unified reflective look, which matters when lining hardware under lighting where variations would stand out. The defined 3-1/8 inch length lets layout lines be repeated precisely across doors and drawers, supporting straight visual lines that reduce rework caused by misaligned hardware in a finished kitchen or furniture project.
Common Questions About This Berenson Cup Pull
What are the key dimensions of the Berenson 0961-126-P pull?
The Berenson 0961-126-P pull has a 2-1/2 inch (64 mm) center to center, 3-1/8 inch overall length, 1 inch projection, and 1-1/16 inch width, guiding hole layout and visual proportions on cabinet fronts.
How does the 64 mm center to center spacing help installation?
The 64 mm center to center spacing matches a common cabinet drilling pattern, so a single jig setting can be used repeatedly across multiple doors and drawers for consistent alignment.
What material is this Berenson Advantage Series cup pull made from?
The Berenson Advantage Series cup pull is made from zinc die cast material, giving it a solid metal body that holds up under repeated cabinet and drawer operation.
What type of finish does this cabinet cup pull have?
This cabinet cup pull has a polished chrome finish, providing a bright, reflective surface that coordinates with other polished chrome fixtures and cabinet hardware in the same space.
Where is a 2-1/2 inch cabinet cup pull typically used?
A 2-1/2 inch cabinet cup pull works well on smaller to medium cabinet doors and drawers, allowing clean spacing along banks of fronts without overwhelming narrow rails or stiles.
How does the 1 inch projection affect grip on this pull?
The 1 inch projection holds the cup away from the cabinet surface, creating enough finger clearance to catch the underside of the pull comfortably during everyday opening and closing.
Select This Cup Pull For Matching Chrome Runs
The Berenson Advantage Series cup pull with 2-1/2 inch (64 mm) center to center sizing, 3-1/8 inch length, and 1 inch projection provides a defined template for consistent cabinet hardware layout. The polished chrome finish and zinc die cast construction align with decorative handles and pulls used across full kitchens, baths, or shop-built projects. Using this pull wherever the 64 mm drilling pattern is specified keeps hardware styling and dimensions uniform from one cabinet section to the next, supporting clean visual lines on completed installations.