PVC Edgebanding, Color 4763 Chocolate Pear Tree, 1mm Thick 15/16" x 300' Roll

PVC Edgebanding Chocolate Pear Tree For Panel Edges

PVC edgebanding chocolate pear tree gives a 1mm thick edge treatment that visually matches a wide range of chocolate pear and similar decorative panels, so cabinet and fixture projects can carry the same tone and grain right through the edges. This 15/16 inch width covers typical panel thicknesses with a bit of overhang, letting installers trim back for a clean line on casework and doors. The 300 foot roll format supports longer runs or multiple smaller jobs from a single coil, which helps maintain visual consistency across a full project. The Doellken Woodtape brand and 4763-1540-1 designation identify this as a specific color and texture match, which matters when aligning edges with named laminate or TFL designs.

Color Match Details That Support Design Work

• Color match to American Laminates Chocolate Pear Tree is rated Good, so edges can follow that panel color closely across cabinets or fixtures.
• Color match to Arauco Prism WF228 Sable Glow Suede is rated Good, helping TFL casework keep coordinated faces and edges on the same job.
• Color match to Arborite W-444 Chocolate Pear Tree VL_Velvate is rated Good, supporting laminate projects where the face sheet and edge need a unified look.
• Color match to Cal Door Chocolate Pear is rated Good, which helps door programs keep stile, rail, and edge tones aligned.
• Color match to Funder 363 Apple Cocoa #4_Suede is rated Close, so projects using that board can use this banding where a near tone is acceptable.
• Color match to KML KMAH1552 Chocolate Pearwood Classic is rated Good, keeping casework built with that design visually consistent at the edge.
• Color match to Lab Design 363 Chocolate Pear Texture is rated Good, helping specialty decorative panels maintain their visual intent on exposed edges.
• Color match to Panolam W340 Brown Pearwood Satin is rated Close, which can work where a coordinated but not exact match is acceptable.
• Color match to Pluswood 89W Chocolate Flame is rated Close, providing a similar value when exact grain alignment is less critical.
• Color match to Roseburg Duramine 444 Chocolate Pear Tree S_Suede is rated Good, so commercial millwork using that TFL can carry the look across all visible edges.
• Color match to Roucke Chocolate Pear is rated Close, offering an option where the general chocolate pear tone is the design priority.
• Color match to Tafisa L444 Chocolate Pear Tree Crystalite is rated Good, supporting large runs of casework that rely on that specific board design.
• Color match reference Thermo Pressed TFL-022 Chocolate Pear notes alignment with that thermo-fused laminate look, tying edges to that surface color family.

Edgebanding Dimensions That Affect Field Installation

The 1mm thickness on this PVC edgebanding provides a more substantial edge profile than thin tape, which supports a defined edge line after trimming on cabinet boxes, shelves, and doors. The 15/16 inch width gives coverage across standard panel thicknesses with room to trim, so installers can route or knife back to a crisp, flush edge without exposing the core. The 300 foot roll length supports larger commercial or multi-room residential runs, helping crews keep color and texture consistent from cabinet to cabinet without switching coils during a project.

Where Chocolate Pear Tree Edgebanding Works Best

Using This PVC Edge Banding With Specific Panels

This Doellken Woodtape PVC edgebanding in color 4763 Chocolate Pear Tree is matched to several well-known decorative surfaces, so fabricators can align their edge choice to the panel name on the cut list. American Laminates Chocolate Pear Tree, Arborite W-444 Chocolate Pear Tree VL_Velvate, and Tafisa L444 Chocolate Pear Tree Crystalite are all rated Good matches, which supports casework built around those exact designs. Arauco Prism WF228 Sable Glow Suede and Roseburg Duramine 444 Chocolate Pear Tree S_Suede also have Good match ratings, helping shops that standardize on those TFL lines keep a uniform appearance. Cal Door Chocolate Pear and KML KMAH1552 Chocolate Pearwood Classic share the chocolate pear visual family, and their Good rating means routed profiles and flat edges can coordinate across doors and boxes. Lab Design 363 Chocolate Pear Texture sits in the same group with a Good rating, which matters for feature panels where exposed edges are at eye level. Close match notes for Funder 363 Apple Cocoa #4_Suede, Panolam W340 Brown Pearwood Satin, Pluswood 89W Chocolate Flame, and Roucke Chocolate Pear still connect this banding to those materials, giving shops flexibility when a near tone achieves the design intent.

Why Thickness, Width, And Roll Format Support Workflow

The 1mm thickness of this PVC edge banding adds enough material at the perimeter to handle trimming without feeling overly sharp, which is useful on cabinet doors, drawer fronts, and shelving where hands regularly contact the edge. The 15/16 inch width pairs with common panel thicknesses so that, after application and trimming, the core material stays covered while the face and back surfaces tie cleanly into the edge. This dimensioning supports efficient use on straight runs and on shaped parts routed after banding. The 300 foot roll length consolidates supply for medium to large jobs, which can reduce color break points on big banks of cabinets because the same coil can serve all related parts. The manufacturer part number 4763-1540-1 identifies this exact combination of color, thickness, and width, giving shops a clear reference when reordering for repeat programs or field service work.

Common Questions About This Chocolate Pear Edgebanding

Select Chocolate Pear Tree Edgebanding For Matched Jobs

PVC edgebanding chocolate pear tree in this 1mm thick, 15/16 inch wide, 300 foot roll format supports cabinet, fixture, and panel projects built around chocolate pear and related designs. With specific Good and Close match notes to brands such as American Laminates, Arauco Prism, Arborite, Roseburg Duramine, and Tafisa, this Doellken Woodtape 4763-1540-1 product gives shops a defined option when a coordinated edge is required. For jobs that call out these surfaces by name, selecting this banding keeps ordering clear and helps maintain a unified appearance from face to edge.