QA29-C Queen Anne Table Leg Cherry 29"

2-1/8" Wide Queen Anne Cherry Table Leg Use

2-1/8" wide x 29" high Queen Anne table leg defines this part as a full-height work surface or table support, so it suits standard table projects where a traditional leg length is required. The furniture grade table legs construction signals a quality level suited to visible furniture builds where the leg will be a primary design element. The unfinished wood material allows sanding and finishing to match existing pieces, which helps on refacing jobs or when tying new work surfaces into older installations. The Queen Anne style shape identifies the design profile, giving you a consistent look when matching other Queen Anne components in a space. The cherry wood species called out in the product name provides a recognizable color and grain character once finished, supporting projects that are built around cherry cabinetry or trim. The 29 inch height dimension provides predictable layout when planning apron, skirt, and rail locations around the leg.

Key Queen Anne Cherry Leg Details In Practice

• The 2-1/8 inch width on this table leg establishes the footprint at each corner, which helps you plan apron dimensions and joint placement so loads transfer cleanly into the leg.
• The 29 inch high measurement defines the vertical support length, so you can design work surfaces and tables around standard heights while maintaining comfortable leg clearance beneath.
• The furniture grade table legs description indicates a build appropriate for finished furniture, allowing you to position the leg where it stays fully visible rather than hiding it behind panels.
• The unfinished wood construction lets you shape, sand, and apply your preferred finish schedule, so the leg can visually blend into existing cherry furniture or align with shop-standard finishing systems.
• The Queen Anne designation specifies the profile family, helping you maintain a consistent traditional style across multiple legs and coordinating furniture components in the same room.

Installation Planning For QA29-C Cherry Table Leg

The QA29-C Queen Anne table leg part number ties this component directly to project documentation, which simplifies reordering when you are standardizing table designs. The 29 inch height gives a fixed reference when laying out mortises, blocks, or brackets at the top of the leg, so aprons and rails line up correctly around the perimeter. The 2-1/8 inch wide measurement defines how much bearing surface is available for joinery on each side of the leg, guiding you toward appropriate joint sizes during layout. The unfinished cherry wood surface accepts machining before finishing, so you can cut joinery or trim the top shoulder to suit a particular table frame without fighting through a hardened topcoat.

How This Grand River Cherry Leg Fits Work

Using This Queen Anne Leg In Furniture Builds

The Grand River Wood Products branding on this Queen Anne table leg identifies it as part of a dedicated furniture component line, which helps maintain uniform appearance across multiple tables in a project. The furniture grade table legs description points to a finish-ready surface, allowing you to orient the cherry leg so the best grain faces outward on each corner. The 2-1/8 inch width provides enough section to carry typical dining or work surface loads, which supports use in everyday work surface & tables applications that fall under its category. The 29 inch high dimension fits common table and desk layouts, so tops align visually with adjacent units built to the same standard height range. The cherry species referenced in the product name contributes a warm tone after finishing, allowing the leg to sit cleanly next to cherry cabinet faces or trim from the same wood family.

Details That Support Repeatable Table Results

The QA29-C Queen Anne table leg identifier supplies a consistent spec you can call out on cut lists, which helps keep leg profiles and dimensions identical across multiple builds. The combination of 2-1/8 inch width and 29 inch height offers fixed geometry, allowing jigs and spacing blocks to be reused from job to job without adjustment. The unfinished wood status means you can batch-sand and finish these furniture grade table legs alongside other cherry components, keeping color and sheen uniform across the whole assembly. The Queen Anne style label separates this profile from other leg shapes in the same work surface & tables category, reducing mix-ups when organizing parts in the shop or on site. The cherry designation in the product name signals that once finished, these legs will visually track with other cherry wood elements, which simplifies material planning on multi-room or multi-piece furniture runs.

Common Questions About This Queen Anne Leg

Selecting This Queen Anne Leg For Your Next Table

This 2-1/8 inch wide x 29 inch high Queen Anne table leg in cherry provides a defined size, style, and species for work surface & tables projects, allowing you to standardize on QA29-C when you want furniture grade, unfinished Queen Anne cherry legs across multiple builds.