Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf closet basket gives you slide-out storage for clothing, accessories, and other closet items in a defined 24 inch wide, 14 inch deep, and 7 inch high format. This Rev-A-Shelf steel closet basket is a side mount closet basket with an oil rubbed bronze finish, built for closet organization where clean access matters. The pull out closet basket uses heavy duty ball bearing slides with a bayonet mounting system configured to the 32 mm system. The basket is also designed to be easily removable and reinstalled, which helps when you need to load, clean, or rearrange a closet storage basket. Oil rubbed bronze baskets are supplied with black slides for a consistent appearance.
Key specs to confirm: This Rev-A-Shelf closet basket is listed at 24 inches wide, 14 inches deep, and 7 inches high. Buyers should confirm the inside width of the closet opening, side panel condition for mounting, and the available depth for a 14 inch deep closet basket plus slide travel. This product uses side-mounted heavy duty ball bearing slides and a bayonet mounting system configured to the 32 mm system, so hole pattern and panel layout should be checked before purchase. The basket is described as 100 lb rated in the product data. Any additional safety, compliance, or installation details not shown here should be confirmed with the manufacturer or technical documentation.
What's included: Verified product data confirms an individual pack Rev-A-Shelf steel closet basket with slides. Included mounting hardware details are not stated and should be confirmed before ordering if your project requires specific fasteners.
What to verify before ordering: Confirm opening width, usable depth, side-mount compatibility, 32 mm system alignment, and whether your project needs one basket or multiple matching baskets. Also confirm fasteners, installation instructions, and any technical details not listed in the product data.
A pull out closet basket is often chosen when a fixed shelf makes it hard to see or reach stored items. In a bedroom closet, dressing area, or utility storage zone, a slide-out basket can keep folded clothing, smaller accessories, and everyday gear easier to access without unloading the whole shelf. This Rev-A-Shelf closet basket is built around a 24 inch wide footprint with a 14 inch depth and 7 inch height, which gives buyers a defined storage area to plan around.
For installers and serious DIY buyers, the side mount closet basket format matters because it changes how the opening is prepared. This basket uses heavy duty ball bearing slides and a bayonet mounting system configured to the 32 mm system. That makes it relevant for closet builds that already use a 32 mm drilling pattern or for projects where consistent hardware placement is important. The removable closet basket design also helps in real use. If the customer wants to carry contents to a folding area, clean the basket, or reset the layout later, the basket can be removed and reinstalled more easily.
The basket rests on top of the ball bearing slides. According to the product data, that layout helps eliminate the torque twist found in other designs. For the buyer, that means the basket design is intended to support more stable movement during normal opening and closing. The oil rubbed bronze closet basket finish, paired with black slides, also gives a coordinated look for darker closet hardware schemes.
Before installation, buyers should still verify practical fit details. A 24 inch closet basket may refer to basket width, but the opening must also accommodate the slide hardware and mounting positions. A 14 inch deep closet basket also needs enough clear depth for the basket and slide operation. If your closet system is not built around the 32 mm pattern, confirm how the side mount hardware will be positioned before ordering.
When comparing closet basket options in general, buyers usually look at four things: mounting style, basket removal, slide type, and finish consistency. This Rev-A-Shelf steel closet basket gives clear verified information in each of those areas. It is a side mount closet basket, not a floor-supported unit. It uses heavy duty ball bearing slides, and the basket is designed to be removable and easy to reinstall. It is also offered here in oil rubbed bronze with black slides for a consistent appearance.
Generic baskets may not clearly state how the basket sits on the slide system or whether the basket can be removed without extra steps. In this product data, the basket rests on top of the ball bearing slides, which is specifically noted as a way to reduce torque twist inherent in other designs. That detail can matter for buyers who want a pull out closet basket that feels steady in repeated use.
Another point of comparison is planning confidence. This product listing gives a specific basket size of 24 inches wide, 14 inches deep, and 7 inches high, plus a stated 100 lb slide rating and 32 mm system compatibility for the bayonet mounting system. Those are practical details that help a buyer match the basket to a closet opening and installation method. If your project requires exact fasteners, drilling guidance, or a full parts list, confirm those details before purchase because they are not fully listed in the verified data.
This Rev-A-Shelf closet basket fits openings that can accept a 24 inch wide basket, side-mounted slides, and the required slide clearance. Confirm interior dimensions before ordering.
This side mount closet basket is designed to install with side-mounted ball bearing slides rather than a bottom-mounted frame.
This steel closet basket is listed at 24 inches wide, 14 inches deep, and 7 inches high.
This pull out closet basket is described with basket slides, and the product data identifies heavy duty ball bearing slides as part of the design.
This removable closet basket is designed to be easily removed and reinstalled for cleaning, loading, or layout changes.
This closet storage basket uses a bayonet mounting system configured to the 32 mm system. Confirm your panel drilling layout before installation.
This oil rubbed bronze closet basket uses an oil rubbed bronze basket finish with black slides for a coordinated appearance.
The ball bearing slides for this Rev-A-Shelf closet basket are listed as 100 lb rated in the verified product data.
This side mount closet basket requires confirmation of opening width, usable depth, side panel mounting space, and 32 mm system compatibility. Follow manufacturer installation guidance and local building requirements where applicable.
Oil rubbed bronze closet basket buyers usually need clear fit information more than extra marketing copy. This Rev-A-Shelf closet basket gives you a defined 24 inch by 14 inch by 7 inch basket size, side-mounted ball bearing slides, and a removable basket design in an individual pack. Before purchase, confirm your opening dimensions, side panel mounting layout, and whether your project follows the 32 mm system. Also verify any hardware or instruction details not shown in the product data so the basket matches your installation plan the first time.
Sold In: 1 Each
