Rev-A-Shelf 4DMCB Series Maple Cutting Board 2"Tx15-3/4"Wx16-1/4"D, -4DMCB-18P

Rev-A-Shelf cutting board for cabinet prep

Rev-A-Shelf cutting board provides a dedicated prep surface and organized cabinet storage in one package. This Rev-A-Shelf 4DMCB Series product is a polyethylene cutting board paired with a door mount cutting board holder. The verified product size is 2 in. thick, 15-3/4 in. wide, and 16-1/4 in. deep. For buyers looking for a revashelf cutting board or a kitchen cabinet cutting board, this item is built around door mounting and includes built-in 5 in. adjustable brackets. The product data identifies the set as a premium polyethylene cutting board with a door mount holder, making it a practical choice when you want the board stored inside the cabinet rather than left on the countertop.

Choose a polyethylene cutting board setup

• Rev-A-Shelf 4DMCB Series product - Helps buyers match this cutting board to the correct series when replacing or specifying cabinet accessories.
• Polyethylene cutting board included - Gives you a non-wood cutting board surface as part of the package rather than requiring a separate board purchase.
• Door mount cutting board holder included - Stores the cutting board on a cabinet door for easier access and less countertop clutter.
• Built-in 5 in. adjustable brackets - Supports installation adjustment during door mounting, which can help with cabinet interior fit.
• 2 in. thickness - Gives buyers a clear dimension to compare against available cabinet depth and door clearance.
• 15-3/4 in. width - Helps confirm whether the cutting board will fit the intended cabinet opening or storage area.
• 16-1/4 in. depth - Provides a verified sizing point for planning storage and access inside the cabinet.
• Manufacturer part 4DMCB-18P - Makes it easier to verify you are ordering the correct Rev-A-Shelf cutting board model.

Confirm cutting board fit before install

Key specs to confirm: This polyethylene cutting board package is listed at 2 in. thick, 15-3/4 in. wide, and 16-1/4 in. deep. The verified description also states that the door mount holder has built-in 5 in. adjustable brackets. Before ordering, confirm your cabinet door can accept a door-mounted accessory of this size and that interior clearance allows the board to store and remove cleanly. If you are comparing RS4DMCB-18P to RS4DMCB-15P or another kitchen cabinet cutting board, verify the exact cabinet opening, hinge clearance, handle interference, and door swing path. Safety, load, and compliance details are not provided in the verified data and should be confirmed with the manufacturer or technical documentation.

What's included: Verified included items are a polyethylene cutting board and a door mount cutting board holder with built-in 5 in. adjustable brackets.

What to verify before ordering: Confirm cabinet door size, interior cabinet depth, hinge position, nearby shelves or pull-outs, screw mounting area, and whether your application needs this exact Rev-A-Shelf 4DMCB Series size and holder style.

Use a door mount cutting board holder

Match the cutting board to daily work

A door mount cutting board holder is useful when the goal is to keep prep tools inside the cabinet but still close at hand. In many kitchens, a loose board ends up leaning against a backsplash, taking drawer space, or sliding around under the sink. This Rev-A-Shelf cutting board package addresses that storage problem by pairing a polyethylene cutting board with a holder designed for cabinet door mounting.

For installers, the main value is straightforward product identification and fit planning. The verified dimensions - 2 in. thick, 15-3/4 in. wide, and 16-1/4 in. deep - give you a starting point for checking whether the board can store inside the selected cabinet. The built-in 5 in. adjustable brackets matter because door-mounted accessories often need some adjustment during placement. That can be helpful when working around cabinet construction details or aligning the holder on the door panel.

For homeowners and serious DIY buyers, this revashelf cutting board setup can make sense in kitchens where counter space is limited and the board needs a dedicated home. It also fits buyers who want a kitchen cabinet cutting board stored vertically on a door rather than laid flat on a shelf. If you are replacing an older cabinet door cutting board rack, confirm the old mounting hole pattern is not assumed to match this holder. The verified data does not provide drilling dimensions, door thickness requirements, or minimum cabinet opening size, so those details should be checked before installation.

Buyers comparing RS4DMCB-18P with RS4DMCB-15P should not assume the same fit. The model reference may indicate a different size or application within the same family, but the exact dimensions for RS4DMCB-15P are not provided here. When exact fit matters, use the verified dimensions for this item and confirm the rest with current manufacturer information.

Compare door mount cutting board holder options

When comparing a door mount cutting board holder to other cutting board storage approaches, the first difference is access. A holder mounted to the cabinet door keeps the board attached to a moving surface, so the board comes forward as the door opens. That can be more convenient than reaching to the back of a shelf. It also keeps the board separate from stacked pans or cleaning items that may share cabinet space.

This Rev-A-Shelf cutting board package also gives buyers a matched set rather than asking them to pair a random board with a separate rack. The verified package includes both the polyethylene cutting board and the holder, which reduces guesswork about whether the board is intended for the rack style supplied. The 4DMCB Series naming also helps buyers stay within the same product family when replacing or specifying parts.

For trade buyers, the most reliable comparison points here are the brand, the verified dimensions, the included holder, and the built-in 5 in. adjustable brackets. Those are concrete details you can use when reviewing cabinet fit. What is not verified here is just as important: there is no provided information on weight capacity, exact mounting hardware, door material requirements, or care instructions. For that reason, the safe buying approach is to compare known dimensions and included components first, then confirm installation details from current technical documentation before final purchase.

Ask fit questions before ordering

Order the right Rev-A-Shelf cutting board

Rev-A-Shelf cutting board buyers should confirm fit first, then match the included components to the intended cabinet. This package includes a polyethylene cutting board and a door mount cutting board holder with built-in 5 in. adjustable brackets. Before purchase, verify the 2 in. x 15-3/4 in. x 16-1/4 in. dimensions against your cabinet door, interior clearance, and hinge layout. If you are comparing this item with RS4DMCB-15P or another cabinet door cutting board rack, use current technical documentation to confirm exact compatibility.

Confirm cabinet door cutting board rack details

This Rev-A-Shelf 4DMCB Series product is identified as a cutting board accessory for kitchen and bath cabinet applications. Buyers who need a cabinet door cutting board rack should use the verified dimensions, included holder, and built-in adjustable brackets as the main checkpoints. If your project depends on exact mounting hardware, door thickness limits, or replacement compatibility with an existing rack, those details should be confirmed before finalizing the order.