Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO500 12 inch undermount drawer slide is a concealed, full-extension runner with integrated soft-close, sized for the shorter drawer boxes found in spice cabinets, bathroom vanities, and small base cabinet drawers. It ships with front locking devices and rear mounting brackets included, covering the hardware most undermount installs need in a single order.
The 12 inch length targets drawer boxes that run shallow — spice pull-outs, bathroom vanity drawers, small base cabinet inserts, and compact utility drawers where an 18 or 21 inch slide would overshoot the cabinet depth. In a face-frame cabinet, the included rear brackets support the back end of the slide behind the face frame, which is the hardware requirement most face-frame installs trip over when rear brackets are sold separately. In frameless casework, the brackets are set aside and the slide mounts directly to the cabinet side. Either way, the box must be built to the PRO500 specification for this length: nominal 12 inch depth, correct box width for the 3/16 inch side clearance, bottom recess, rear notch, and the drilling for the front locking devices.
Steel members carry the load on ball bearings, which run more precisely under load than nylon rollers and maintain consistent travel over repeated cycles. The zinc finish protects the steel through years of indoor service. Because the slide mounts beneath the drawer box, the finish is functional rather than decorative — hardware stays out of sight whether the drawer is open or closed. For drawer boxes with 1/2 to 5/8 inch sides, the 3/16 inch side clearance built into this slide's geometry keeps the box centered and the travel smooth.
This slide suits cabinet shops, renovation contractors, and serious DIYers who need a value-line concealed runner for shorter drawer runs without sacrificing soft-close or full extension. The included bracket kit makes it a practical choice for mixed face-frame and frameless projects where ordering accessories separately adds time and complexity. At 75 lb per pair, it is right-sized for small drawers carrying spices, toiletries, utensils, or office supplies — not a substitute for a heavy-duty undermount when the load calls for one.
Both are included with this SKU. The SAP description confirms the slide ships with front locking devices and rear mounting brackets, which covers the hardware needed for face-frame and frameless installs.
Yes. The included rear mounting brackets support the back end of the slide in a face-frame cabinet. No additional bracket order is needed for a standard face-frame install.
No. The PRO500 12 inch slide is engineered for drawer sides from 1/2 inch to 5/8 inch. For 3/4 inch sides, you need the version of the slide built around 19mm material — those are separate models and the two do not interchange.
Full extension means the drawer member travels approximately the full nominal slide length, bringing the entire drawer box to the cabinet face. The actual travel is close to 12 inches, not a fraction of it — that is what separates full extension from 3/4-extension slides.
Per pair, as undermount load ratings are stated throughout this product line. One pair of slides — left and right — carries 75 lb combined.
When the cabinet is shallow and the job calls for a concealed, soft-close runner with the install hardware already in the box, the PRO500 12 inch slide covers the spec without overcomplicating the order.
Sold In: 6 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 6 Set |  DSPRO500-15 Mfr# 0684250302961 6 | Pro Value Series 15" Soft-Close Full Extension PRO500 Undermount Drawer Slides, Ball Bearing Zinc - 06842503029616 | ||||
Sold in: 6 Set | DSPRO500-18 Mfr# 0684250303961 6 | Pro Value Series 18" Soft-Close Full Extension PRO500 Undermount Drawer Slides, Ball Bearing Zinc - 06842503039616 |