1/4 inch fluid hose assembly from C.A. Technologies provides a 5 foot connection between spray equipment components, giving a defined run length for routing fluid where space or reach is limited. This hose is designed as a fluid hose with a working pressure rating of 750 psi, so it supports higher-pressure material transfer common in professional spray setups. The fluid hose temperature range of 0 to 190 degrees F allows use in typical shop and jobsite environments without exceeding its stated limits. The tube is Nylon 11 and silicone-free, which keeps the fluid path compatible with systems where silicone contamination is a concern during finishing work. Braided high strength synthetic yarn reinforcement supports the pressure rating and helps the hose maintain shape during use. The smooth black synthetic rubber casing identified as RMA B ORS is oil resistant, so exterior exposure to oils in shop environments does not degrade the cover as quickly.
This fluid hose assembly from C.A. Technologies is built on a braided high strength synthetic yarn core, so the hose resists kinking under bend and routing loads common during installation around spray equipment. The smooth outer black synthetic rubber casing lets the hose slide across surfaces more easily during setup, helping with positioning through guides or around corners. The oil-resistant casing handles exposure to oily residues that can be present during installation near pumps or compressors. The 5 foot overall length simplifies planning for short runs between fixed points, reducing excess looping in tight spray stations. With its 1/4 inch size, the hose aligns with equipment designed for that line size, so installation into existing 1/4 inch hose paths maintains expected flow behavior.
This 1/4 inch fluid hose assembly, identified by manufacturer part number 53-213-5, is part of the C.A. Technologies spray equipment hose lineup, aligning with applications needing a 5 foot fluid line. In spray equipment configurations, this hose serves as the fluid transfer path between system components where a 5 foot reach is appropriate, such as between a pump outlet and a nearby gun connection point or manifold. The nylon 11 silicone-free tube keeps the internal fluid path focused on the coating material without adding silicone from the hose wall, which matters in finishing work where material contact surfaces must avoid silicone-based contamination. The braided high strength synthetic yarn reinforcement supports the 750 psi working pressure of the fluid hose, so it can operate within systems that run at elevated pressures while maintaining structural support over the 5 foot run.
The fluid hose working pressure rating of 750 psi, combined with braided high strength synthetic yarn, supports consistent delivery at the pressures specified for this assembly, which helps avoid pressure-related hose deformation that could affect material flow. The fluid hose temperature range of 0 to 190 degrees F gives a published window where the hose materials are designed to perform, supporting consistent hose behavior from cooler shop environments up through warmer conditions near equipment. The smooth black synthetic rubber casing labeled RMA B ORS provides an oil resistant outer surface, so contact with oil in spray areas has less effect on the cover, supporting hose durability when dragged across shop floors or around machinery. The silicone-free Nylon 11 tube benefits finishing workflows sensitive to surface quality by keeping the fluid passage free of silicone from the hose material itself. Together, these characteristics define how the C.A. Technologies fluid hose assembly works as part of spray equipment where controlled pressure, temperature, and material compatibility matter.
This C.A. Technologies fluid hose has a 750 psi working pressure, so it supports higher-pressure spray equipment setups that operate within this stated rating.
This fluid hose has a temperature range of 0 to 190 degrees F, covering typical indoor shop and finishing environments within that window.
This hose assembly is 5 feet long with a 1/4 inch hose size, fitting applications that specify a 5 foot run and 1/4 inch fluid line.
The fluid hose uses a Nylon 11 silicone-free tube, braided high strength synthetic yarn reinforcement, and a smooth black synthetic rubber casing rated RMA B ORS and oil resistant.
The oil resistant smooth black synthetic rubber casing (RMA B ORS) tolerates contact with oils often present around spray equipment, supporting hose cover durability.
This 1/4 inch fluid hose assembly is manufactured by C.A. Technologies and identified by part number 53-213-5 in the spray equipment hose category.
This 1/4 inch fluid hose assembly from C.A. Technologies, with its 5 foot length, 750 psi fluid working pressure, Nylon 11 silicone-free tube, and oil resistant smooth black synthetic rubber casing, is suited to spray equipment layouts built around these specific hose characteristics.