CompX Timberline CB-367 Glass Door Lock (1/4 - 5/16 Thick) Cylinder Body Only, Non-Bore Style, Vertical Mount, Satin Nickel, CB-367

CompX Timberline CB-367 Glass Lock For Swing Doors

CompX Timberline CB-367 glass door lock is a non-bore style cylinder body designed for swing style glass doors, so it secures the door without drilling, which helps preserve finished showcase or cabinet panels that cannot be altered. This CB-367 cylinder body mounts on glass doors from 1/4 to 5/16 inch thick, letting you handle common display glass sizes on one lock style for simpler planning and stocking. The lock slips onto the edge of the glass door at any location, giving flexibility to place the locking point where your cabinet layout or stiles allow. Its vertical mount design locks to the bottom of the cabinet, which creates a positive locking point in typical counter or wall showcase constructions. The lock throw is 1/2 inch, providing a defined engagement distance that supports consistent strike alignment during cabinet fabrication.

Glass Door Lock Details That Support Jobsites

• This non-bore glass door lock slips onto the glass edge, so it avoids hole drilling in tempered glass and helps reduce fabrication steps on swing style doors.
• The cylinder body is fully cushioned, which protects the glass edge and helps reduce the risk of edge chipping during everyday door operation.
• Vertical mount configuration locks to the bottom of the cabinet, giving a predictable latch point for base showcases, counters, and similar casework layouts.
• Mounting on glass doors from 1/4 to 5/16 inch thick lets one lock style cover typical showcase glass, simplifying ordering and replacement work.
• The satin nickel finish provides a neutral, contemporary look that coordinates with many satin nickel cabinet components in retail or residential installations.
• Being part of the Bypassing and Showcase Door Locks class keeps this lock aligned with display and showcase applications where controlled access is important.

Vertical Mount Glass Door Lock Installation Focus

This vertical mount non-bore glass door lock secures to the door edge and locks to the bottom of the cabinet, so layout revolves around the lower cabinet rail or deck. Because the lock slips onto glass from 1/4 to 5/16 inch thick, installers can standardize groove and clearance details around that glass range. The 1/2 inch lock throw defines how far the strike surface at the bottom of the cabinet must be positioned, guiding construction of the mating component. With a fully cushioned body around the glass contact area, the lock supports routine opening and closing of swing style doors while protecting the glass edge from hard contact with metal.

Using This CB-367 Lock In Real Installations

Where The CB-367 Glass Door Lock Fits Best

This CompX Timberline lock is categorized under Bypassing and Showcase Door Locks and is described as designed for swing style doors, so it fits typical glass showcases, counters, and display cases where access needs to be controlled but the door swings instead of sliding. The non-bore style lets the lock slip onto the edge of the glass door at any location, which supports retrofitting on existing cabinet doors and flexible placement on new builds. Vertical mount style means the lock connects to the bottom of the cabinet, so it pairs well with base cabinets or showcases set on a solid deck where a receiving strike can be located directly below the door edge.

Why CB-367 Details Matter For Repeatable Results

The ability to mount on glass doors from 1/4 to 5/16 inch thick means fabricators can use the same CB-367 part number across a narrow but common glass range, which simplifies ordering and reduces variation when stocking locks for service or production. The lock throw of 1/2 inch sets a clear engagement dimension between the cylinder body and its strike at the cabinet bottom, so casework builders can design the bottom rail or strike plate position with repeatable clearance. Because the lock is fully cushioned around the glass, the contact area between hardware and glass is buffered, which supports long-term use on swing style doors in showcases and display cabinets without direct metal-to-glass contact. The satin nickel finish provides a consistent appearance across visible hardware lines in satin nickel projects, making it suitable for coordinated retail or residential display installations.

Practical Questions About This Glass Door Lock

Choose The CB-367 Lock For Glass Swing Doors

The CompX Timberline CB-367 glass door lock combines non-bore edge mounting, a 1/2 inch lock throw, and vertical mounting to the cabinet bottom, so it supports straightforward layouts on 1/4 to 5/16 inch glass swing doors. Its fully cushioned body and satin nickel finish align with showcase and display case work where hardware must protect glass while remaining visually coordinated. For projects specifying Bypassing and Showcase Door Locks in satin nickel on swing style doors, this CB-367 cylinder body offers a focused option for securing glass cabinets.