Würth 23 Gauge x 7/8 in Long Micro Brad Nail, 10000/Box - N23088B

Wurth 23 Gauge Micro Brad Nails For Detail Work

Wurth 23 gauge micro brad nails give you a fine fastener that secures small wood parts while leaving a minimal mark, which helps on cabinet doors, light trim, carvings, ornamentals, and picture frames where visible repair work is costly.

The 23 gauge x 7/8 in length pairs a very slim shank with a short reach, so these nails hold thin stock and narrow moldings without demanding extra sanding at the surface, which supports clean finishing on detailed projects.

Each nail is designed as a micro brad, so it drives easily into typical cabinet and trim materials when used in compatible brad nailers, helping keep delicate profiles intact during assembly.

The fasteners are identified by manufacturer part number N23088B, giving installers and shops a precise way to match this nail to job records, tool charts, or repeat purchase lists when a specific fastener setup is already proven.

Sold in full box quantities, this product supports shop workflows that rely on consistent inventory for cabinet, trim, and framing runs where repeated use of the same nail size keeps setups straightforward.

Key Fastener Details For Cabinet And Trim Work

• The 23 gauge size creates a very small diameter fastener, which helps reduce surface disruption on cabinet doors and light trim, saving time on filling and touch-up during finishing.
• The 7/8 in nail length supports fastening thinner stock and small moldings, giving enough bite for cabinet doors and picture frames without pushing through delicate workpieces.
• The micro brad design works with appropriate brad tools to drive into carvings and ornamentals, helping hold small parts in place while limiting risk of splitting narrow profiles.
• Brand identification as Wurth allows shops already using Wurth fasteners to align this nail with existing purchasing systems, which supports consistent sourcing for repeat cabinetry or framing jobs.
• Classification as a brad nail in the nails product class confirms its role in light fastening tasks, helping installers reserve heavier fasteners for structural work while using these for finish-level details.
• Availability in full box quantities supports production environments, so a crew can run multiple cabinet doors or picture frames using the same nail size without frequent resupply interruptions.

Micro Brad Nail Details For Tool And Job Setup

The 23 gauge diameter of these micro brad nails sets expectations for tool setup, because a compatible brad nailer sized for 23 gauge fasteners can be selected when working on cabinet doors or trim, supporting predictable driving behavior.

The 7/8 in length provides a reference when setting depth and material stack-ups, so installers can plan fastening of light trim, carvings, ornamentals, and picture frames without unplanned breakthrough on the face side of the work.

The product description notes that these nails fit tools such as Wurth 11191W and similar models, giving users of that nailer a direct match between consumable and tool, which streamlines fastener selection on the bench.

Knowing that the same nail handles cabinet doors, light trim, and small decorative pieces allows shops to standardize one 23 gauge length for multiple detail applications, simplifying nail storage at the workstation.

Using Wurth N23088B Nails In Woodworking Projects

Where These 23 Gauge Micro Brads Perform Best

The stated applications - cabinet doors, light trim, carvings and ornamentals, and picture frames - position these Wurth 23 gauge x 7/8 in micro brad nails as a go-to fastener whenever the visible face of the work must stay clean, which is critical on finished cabinetry and framed pieces.

On cabinet doors, the slim 23 gauge shank holds components without forcing large holes near edges, supporting stable assembly while preserving the look of rails, stiles, or applied moldings.

In light trim work, the short 7/8 in length lets installers tack narrow moldings and small profiles to substrates where deeper penetration might interfere with back-side clearances, keeping trim aligned without telegraphing through to the surface.

For carvings and ornamentals, the micro brad format provides a way to pin fine details to a base, so pieces stay located during glue curing or handling while the tiny entry point stays easy to blend into carved patterns.

When building picture frames, these brad nails offer a fastening option suited to slim frame stock, giving holding power at the corners or for applied details while preserving crisp lines that support a clean presentation.

Why The N23088B Details Support Consistent Results

The exact specification of 23 gauge x 7/8 in is central to repeatable setups, because crews can log this size for cabinet doors and trim jobs and return to the same Wurth N23088B nails whenever that combination of holding power and low visibility has already produced acceptable results.

The micro brad designation signals that these nails are designed for light fastening duty, which guides users to deploy them on finish-oriented assemblies like picture frames or ornamentals rather than heavy structural joints, helping maintain an efficient fastener mix on the job.

The fact that they fit tools such as Wurth 11191W and similar models means a shop running that nailer can stock this part as a standard consumable, reducing time spent matching nails to tools during busy production days.

Being categorized by Wurth Baer Supply under fasteners and specifically brad nails clarifies their role in a hardware lineup, so purchasing teams can align them with finishing stations or bench work focused on detailed wood components.

Sold in full box quantities only, these nails suit environments where repeated work on cabinet doors, light trim, carvings, ornamentals, and picture frames generates steady consumption, supporting planning around bulk use instead of sporadic single-job purchases.

Common Questions About Wurth 23 Gauge Micro Brads

Selecting Wurth Micro Brads For Finish Tasks

Choosing Wurth 23 gauge micro brad nails for cabinet doors, light trim, carvings, ornamentals, and picture frames puts a known-size fastener behind your finish work, so tool setups, material choices, and repeat jobs can all follow a consistent 23 gauge x 7/8 in standard.