Particle board panels 5/8 inch 61 x 121 sheet
Description
Particle Board Panels 5/8 Inch For Project Use
Particle board panels 5/8 inch give you a standard-thickness sheet built for panel work where a flat, uniform core matters. These panels measure 61 x 121, so each sheet covers a broad area and reduces the number of seams you lay out on larger jobs. The board is classified as particle board under board panel products, which means you get a machined, engineered panel instead of random offcuts, helping layouts stay consistent from sheet to sheet. Brand labeling from Tafisa Canada, Inc. identifies the manufacturer, so you can match this panel to existing jobs or specifications that call for Tafisa particle board. The material uses 100 percent recycled and recovered wood fiber, so the core is built from reclaimed wood fiber instead of virgin lumber, supporting waste reduction goals on woodworking and cabinet projects without changing the panel handling in the shop.
Key Particle Board Details That Drive Results
- The 5/8 inch thickness creates a solid, mid-gauge panel that balances weight and rigidity, which is useful when you need structure without moving up to thicker, heavier board.
- The 61 x 121 panel size delivers a wide, long sheet that spans larger cabinet runs or casework sides, helping reduce joints that can slow assembly or telegraph through finished surfaces.
- The board is identified as particle board within board panel products, giving you an engineered wood panel with a consistent interior makeup that responds predictably when cutting and machining.
- Branding from Tafisa Canada, Inc. ties the panel to a known manufacturer, which matters when matching material on repeat projects or following a specified supplier list for commercial work.
- The use of 100 percent recycled and recovered wood fiber turns leftover wood fiber into a usable core, supporting material-efficiency requirements on projects focused on responsible wood-fiber sourcing.
Panel Format And Sizing For Straightforward Layout
The 5/8 inch thickness on this particle board panel sets your cut list on a common, repeatable dimension, which simplifies planning for cabinet, shelving, or panel-based assemblies built around that gauge. With a 61 x 121 panel size, layout for larger components happens on a single sheet more often, which limits offcuts and reduces extra seams that would otherwise need additional handling. Classification as particle board within the board panel products category means the core is formed from wood particles, so the sheet behaves as a man-made panel rather than solid lumber, with more uniform response across the length and width during cutting and machining workflows.
Using Tafisa Particle Board Panels In Real Jobs
Where These Industrial Particle Board Panels Fit
This panel is identified as PRTCLBD IND 5/8X61X121, tying the sheet to an industrial particle board format intended for panel-based woodworking and case construction. The 61 x 121 dimensions position the board for projects that need oversized components compared to standard 4 x 8 sheets, helping when you design longer cabinet sides or tall partitions in one piece. As a particle board classified sheet, it serves as a core material for board panel applications where a manufactured wood substrate supports laminating, veneering, or other finishing steps that rely on a flat, continuous surface. The Tafisa Canada, Inc. branding connects the panel to a consistent industrial supply source, which supports repeat work where the same substrate is specified across multiple jobs.
Why These Particle Board Details Matter On Site
The stated 5/8 inch thickness gives you a dependable starting point for joinery depths, groove placement, and hardware recesses that assume that gauge, which keeps your machining program or shop templates aligned from sheet to sheet. The larger 61 x 121 format compared to smaller panels helps reduce the number of cuts needed to pull big parts, which can trim layout time and reduce cumulative dimensional error over multiple joints. Using 100 percent recycled and recovered wood fiber in the core rebuilds the panel from reclaimed wood fiber, which can support project requirements around re-used wood fiber while still behaving as a standard particle board in handling. The manufacturer part number ATPA100095 ties directly to this configuration, so ordering and reordering the same sheet keeps thickness and dimensions consistent across phases of a project, supporting uniform panel performance over time.
Common Questions About Tafisa Particle Board Sheets
What are the exact dimensions of this particle board panel?
The particle board panel measures 5/8 inch thick and 61 x 121 in size, so each sheet provides a large surface area for cutting cabinet parts or other panel components from a single board.
What type of wood product is this Tafisa panel?
This Tafisa Canada, Inc. panel is classified as particle board within board panel products, meaning it is an engineered panel made from wood particles for consistent sheet-style use.
How is the wood fiber in this panel sourced?
The panel uses 100 percent recycled and recovered wood fiber, so the core is formed from reclaimed wood fiber, supporting projects that emphasize efficient use of wood resources.
What does the industrial designation PRTCLBD IND 5/8X61X121 indicate?
The PRTCLBD IND 5/8X61X121 designation identifies an industrial particle board sheet at 5/8 inch thickness and 61 x 121 dimensions, which guides selection for panel-based shop work.
Who manufactures this particle board sheet?
This sheet is manufactured by Tafisa Canada, Inc., providing a defined source when projects call for Tafisa particle board or when repeating material choices across jobs.
What does the ATPA100095 part number refer to?
The ATPA100095 manufacturer part number refers specifically to this 5/8 inch, 61 x 121 particle board panel configuration, which keeps ordering consistent for repeat work.
Select This Panel For Consistent Sheet-Based Projects
This Tafisa Canada, Inc. particle board sheet pairs a 5/8 inch thickness with a 61 x 121 format, giving you a stable, industrial panel size for cabinet, casework, and other board panel applications. With a core made from 100 percent recycled and recovered wood fiber, the panel supports wood-fiber efficiency while maintaining the behavior of an engineered sheet during layout and machining. Use the ATPA100095 identifier when specifying or reordering this exact configuration so your shop runs on the same thickness and panel dimensions from job to job.