Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf mounting bracket provides a top-mount way to use Rev-A-Shelf wire baskets in cabinet or closet openings that are not standard 18 inch, 24 inch, or 30 inch widths. This closet basket mounting bracket is made by Rev-A-Shelf Corporation and is sold as a pair. The product is an aluminum bracket with a chrome finish and measures 24 inches wide, 1/4 inch deep, and 6-1/2 inches high. A wire basket top mount bracket like this installs to the underside of a cabinet shelf, making it useful when side-mount conditions do not match standard basket widths. For revashelf and rev a shelf basket installations, the web description states that a minimum cabinet opening of 1/2 inch greater than basket size is required for use.
Key specs to confirm: This top mount bracket is a Rev-A-Shelf aluminum bracket with a chrome finish, sized at 24 inches wide, 1/4 inch deep, and 6-1/2 inches high. It is intended to mount to the underside of a cabinet shelf and is used with Rev-A-Shelf wire baskets in openings that are not standard 18 inch, 24 inch, or 30 inch widths. The verified fit rule states that the cabinet opening must be at least 1/2 inch greater than the basket size. Buyers should also confirm the exact basket model, shelf construction, available mounting surface, and hardware requirements before purchase. Load rating, compliance details, and any additional installation limits should be confirmed with the manufacturer or technical documentation.
What's included: One pair of Rev-A-Shelf top mount brackets. The verified data identifies the product as sold in pairs.
What to verify before ordering: Confirm your basket size, opening width, underside shelf mounting space, and that your installation uses a Rev-A-Shelf wire basket application compatible with a top-mount bracket. Also confirm whether mounting fasteners are included, since that detail is not verified here.
Many buyers run into the same issue with closet baskets and pullout storage: the opening is close to the target size, but it is not one of the standard widths listed for a basket program. When that happens, a top mount bracket can be the practical hardware choice. This Rev-A-Shelf wire basket bracket is described for use in openings that are not standard 18 inch, 24 inch, or 30 inch widths, which makes it relevant for custom closet layouts, cabinet retrofits, and utility storage areas where dimensions do not follow a basic module.
A common scenario is a shelf above the basket location that provides a stable mounting surface, while the side walls or opening dimensions are less predictable. In that case, a closet basket mounting bracket that installs to the underside of the cabinet shelf can help adapt the basket installation to the available space. The verified guidance is direct: the cabinet opening must be at least 1/2 inch greater than the basket size. That gives buyers an important measurement rule before they order.
This product is also a useful fit for buyers replacing older revashelf or rev a shelf basket hardware and wanting to keep the basket system within the same brand family. Because the bracket is aluminum and finished in chrome, it aligns with the verified finish and material details instead of leaving buyers to guess. The 24 inch width, 1/4 inch depth, and 6-1/2 inch height should be checked against the shelf underside and basket plan before installation. If your project depends on a specific fastener type, load limit, or basket series compatibility, those points should be confirmed with current technical documentation.
When buyers compare a chrome mounting bracket for closet baskets, the key differences are usually mounting method, dimensional fit, and whether the hardware is intended for standard or non-standard openings. This product stands out for a clearly stated purpose: it allows use of Rev-A-Shelf wire baskets where the opening is not a standard 18 inch, 24 inch, or 30 inch width. That is a meaningful distinction because many basket installations fail at the planning stage when the opening is close but not exact.
Another practical comparison point is installation location. Some basket hardware depends on side mounting conditions, while this closet basket installation bracket mounts to the underside of a cabinet shelf. For installers and serious DIY buyers, that changes the measurement process. Instead of only checking side clearance, you also need to confirm shelf position, underside mounting area, and the opening being at least 1/2 inch greater than the basket size.
Material and finish also matter when matching visible hardware. The verified product data identifies aluminum construction and a chrome finish only. Buyers who need a different finish should confirm that before ordering rather than assuming alternate finishes exist. Package quantity is another point buyers often miss. This product is sold in pairs, which helps define what arrives for one bracket set. If your project needs extra hardware, replacement screws, or basket-specific mounting parts, confirm those details separately. Taken together, the verified dimensions, top-mount format, and Rev-A-Shelf brand identity give buyers a clear basis for deciding whether this bracket matches the basket application they are planning.
Rev-A-Shelf mounting bracket allows Rev-A-Shelf wire baskets to be used in openings that are not standard 18 inch, 24 inch, or 30 inch widths.
This top mount bracket installs to the underside of a cabinet shelf. Follow manufacturer installation guidance and local building requirements where applicable.
This closet basket mounting bracket requires a cabinet opening at least 1/2 inch greater than the basket size for use.
This bracket is described for openings that are not standard 18 inch, 24 inch, or 30 inch widths.
This Rev-A-Shelf wire basket bracket measures 24 inches wide, 1/4 inch deep, and 6-1/2 inches high.
This chrome mounting bracket is made of aluminum and is available in a chrome finish only.
This closet basket bracket pair is sold in pairs, which confirms a matched set of brackets is included.
Rev-A-Shelf basket compatibility should be confirmed by basket size, opening width, and mounting method before ordering.
Mounting screw inclusion is not verified in the provided product data, so buyers should confirm included hardware before ordering.
This closet basket installation bracket should be matched to basket size, opening width, shelf underside space, and the required 1/2 inch minimum clearance over basket size.
chrome mounting bracket buyers should confirm basket size, opening width, and underside shelf mounting space before purchase. This Rev-A-Shelf bracket is sold as a pair and is intended for Rev-A-Shelf wire basket use in non-standard openings, with a required cabinet opening at least 1/2 inch greater than basket size. Review the verified dimensions of 24 inches wide, 1/4 inch deep, and 6-1/2 inches high, and confirm any unlisted hardware or technical requirements before ordering.
Sold In: 1 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Pair |  RSCTMB-18 Mfr# CTMB-18-3 | Rev-A-Shelf 18" Chrome Mounting Bracket, CTMB-18-3 |