Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Granby appliance pull is a zinc die-cast appliance pull from the Granby collection in a satin nickel finish, so it delivers a consistent decorative hardware look that ties large appliance fronts to surrounding cabinetry. The 18 inch center-to-center dimension sets fixed mounting points on wide doors or panels, helping align this pull with appliance trim and adjacent hardware. The overall 18-15/16 inch length gives you extra hand clearance across the panel width, which supports a confident grip on heavy appliance doors. A projection of 2-3/8 inches spaces the hand away from the panel face, helping users get fingers behind the pull without scraping against the surface. The 1-3/16 inch width provides a solid grasp area along the bar, which supports controlled opening and closing on full-height panels.
The 18 inch center-to-center drilling dimension on this Granby satin nickel appliance pull defines the exact distance between mounting holes, which simplifies layout when aligning with appliance manufacturer panel guidelines. The 8-32 x 1 inch screw size aligns with a common threaded standard, so installers can match drilling and pilot holes to that hardware sizing. The 2-3/8 inch projection sets how far the pull stands off the panel face, which helps when planning clearances near adjacent doors, walls, or trim. The overall 18-15/16 inch length provides a reference for edge spacing, allowing installers to position the pull so it sits level and visually centered on tall or wide fronts.
This Allison by Amerock Granby series satin nickel 18 inch center-to-center appliance pull fits projects where a long pull is needed across appliance fronts or oversized cabinet panels. The appliance pull classification aligns it with panel-ready appliances or large doors that benefit from a full-hand grip. The satin nickel finish supports use in spaces that already feature similar decorative hardware tones, helping designers and installers maintain visual continuity across kitchens or utility areas. The lathe-turned inspired Granby styling allows this pull to sit comfortably in both traditional and transitional layouts, so it can bridge different cabinet door profiles in the same room.
The 18-15/16 inch overall length works well when spanning the width of wider drawers or doors, giving users a broad grasping area anywhere along the bar. The 2-3/8 inch projection helps when panels are thicker or slightly proud of surrounding cabinetry, keeping the grip area clear of neighboring faces. The 1-3/16 inch width provides substance in the hand, which is useful on heavy doors that demand a firm pull. The zinc die-cast material supports a solid feel when operated repeatedly, which suits high-use appliance locations. The Amerock Granby appliance pull part number BP55248G10 gives project planners a precise reference when matching finish, style, and size across multiple openings.
The 18 inch center-to-center dimension allows installers to standardize drilling jigs and templates, supporting consistent alignment of multiple pulls on a run of appliance fronts or tall doors. The fixed 8-32 x 1 inch screw size helps fabricators prepare accurate pilot holes in wood or panel substrates sized for that thread, supporting firm attachment. The 2-3/8 inch projection sets a repeatable stand-off distance from the panel surface, which helps doors swing without knuckles contacting the face when gripping from the side. The 1-3/16 inch width also spreads load across a larger grasp area, which is helpful when users pull from different points along the handle.
The satin nickel finish on the Granby series appliance pull gives designers a defined color reference, aiding coordination with hinges, smaller pulls, and other satin nickel hardware in the same installation. The Granby collection identity lets hardware schedules call out a unified style, simplifying communication between designers, shops, and installers. The nearly 19 inch overall length of BP55248G10 serves as a clear dimensional marker when comparing this pull to shorter cabinet handles, guiding selection for locations that demand a visibly substantial pull on large appliance-scale doors.
The Amerock Granby appliance pull has an 18 inch center-to-center size, which sets the exact hole spacing layout on appliance panels or large cabinet fronts.
The BP55248G10 Granby satin nickel appliance pull measures 18-15/16 inches overall, giving nearly 19 inches of bar length across the door or drawer face.
This Granby series 18 inch center-to-center appliance pull projects 2-3/8 inches from the surface, setting consistent hand clearance from the panel face.
The Granby satin nickel appliance pull is made from zinc die-cast, providing a solid, rigid body suitable for frequent use on appliance fronts.
The Allison by Amerock BP55248G10 appliance pull uses a satin nickel finish, helping it coordinate with other satin nickel decorative hardware.
This Granby appliance pull is specified with 8-32 x 1 inch screws, guiding drill and pilot hole sizing for mounting on appliance panels.
The Allison by Amerock Granby series satin nickel 18 inch center-to-center appliance pull BP55248G10 offers a defined size, material, and finish set for appliance-scale fronts. The 18 inch center spacing, 18-15/16 inch length, 2-3/8 inch projection, and 1-3/16 inch width give installers and designers clear dimensional references when choosing a pull that visually and functionally suits large doors or panels.
Sold In: 1 Each
