Amerock Blythe Series 3 in (76 mm) Center to Center Weathered Nickel Pull, -BP55222WN
Description
Blythe Pull 3 In Center To Center Details
Blythe pull 3 in center to center installation uses a 3 in, or 76 mm, hole spacing, which lets you match standard cabinet drilling layouts for straightforward swaps on many existing fronts. The ribbed barrel center with decorative accents focuses the hand grip to the middle of the pull, which helps keep fingers away from door edges during regular opening and closing. Smooth curved lines at each end guide the hand into position, which can feel more controlled when reaching for smaller drawers. The overall length of 3-5/8 in, or 92 mm, leaves a bit of overhang past the mounting holes, which visually frames the hardware footprint on the face of the door or drawer. A width of 1/2 in, or 13 mm, keeps the profile slim across the front, which can help when working on tight face layouts.
Key Blythe Weathered Nickel Pull Advantages
- The zinc die-cast material gives the pull a solid metal body, which supports a consistent feel from piece to piece across a run of cabinets.
- The weathered nickel finish sets a muted metal tone, which helps this pull blend with other nickel-toned decorative hardware in the same space.
- The 1-1/4 in, or 32 mm, projection holds the gripping surface away from the cabinet face, which leaves finger clearance behind the pull during use.
- The 5/8 in, or 16 mm, base diameter defines the footprint at each mounting point, which helps you understand how much of the cabinet surface the bases will visually cover.
- The Blythe Collection styling ties the ribbed center with decorative accents, which maintains a consistent traditional look when used across doors and drawers.
Amerock Blythe 3 In Pull Mounting Notes
The 3 in, or 76 mm, center-to-center dimension on this Amerock Corporation pull sets the exact spacing between its two mounting points, which is critical when laying out new drilling or aligning with existing holes. The projection of 1-1/4 in, or 32 mm, defines how far the front of the pull stands off the cabinet surface, which directly affects how much fingertip room you have behind the handle. The 5/8 in, or 16 mm, base diameter at each end outlines the contact area at the cabinet face, which helps you plan positioning relative to panel edges or profiles. Together, these measurements give you the working dimensions needed to coordinate this pull with surrounding cabinet parts.
Using This Blythe Weathered Nickel Cabinet Pull
Where The Blythe Collection Pull Works Well
The Blythe Collection identity places this pull in Amerock Corporations line of decorative hardware and moldings, which aligns it with cabinetry, furniture, and related woodwork needing a handle-style grip. Its classification as a handle and pull underlines its role as a primary touchpoint on doors and drawers, which keeps it central to everyday operation of casework. The traditional elegance styling description, with a ribbed barrel center and decorative accents, positions this pull for projects where a classic look is desired, which can matter on kitchens, baths, or built-ins matching traditional trim. The weathered nickel finish coordinates with other nickel decorative elements, which helps maintain a consistent metal tone across hinges, latches, or other visible fittings from the same space.
Details That Support Consistent Cabinet Results
The Amerock BP55222WN manufacturer part number uniquely identifies this specific combination of Blythe styling, 3 in center-to-center dimension, weathered nickel finish, and zinc die-cast construction, which simplifies reordering the same pull for future phases or service work. The 3-5/8 in, or 92 mm, overall length fixes how much linear space each pull occupies on a rail or stile, which is useful when aligning multiple pulls in a grid across banks of drawers. The 1/2 in, or 13 mm, width concentrates the design into a narrow band, which can reduce interference with adjacent trim or panel details. The 1-1/4 in, or 32 mm, projection keeps the gripping area consistently offset from the face, which helps users get their fingers behind the handle in a repeatable way across all installed locations.
Common Amerock BP55222WN Pull Questions
What is the center-to-center size on this pull?
The Amerock BP55222WN pull has a 3 in, or 76 mm, center-to-center dimension, which defines the spacing for drilling or matching existing cabinet mounting holes.
How far does the Blythe pull stand off the cabinet?
The Blythe pull has a 1-1/4 in, or 32 mm, projection, which sets the distance from the cabinet face to the front of the handle for finger clearance.
What is the overall length of the BP55222WN pull?
The BP55222WN pull measures 3-5/8 in, or 92 mm, overall length, which indicates the total space it occupies along a drawer front or door rail.
What material is the Amerock Blythe 3 in pull made from?
The Amerock Blythe 3 in pull is zinc die-cast, which provides a solid metal body with consistent shape and detailing across multiple pieces.
What finish is on this Blythe Collection cabinet pull?
This Blythe Collection pull uses a weathered nickel finish, which delivers a subdued nickel appearance suited to traditional decorative hardware schemes.
How wide are the bases on this weathered nickel pull?
Each base on this weathered nickel pull has a 5/8 in, or 16 mm, diameter, which defines the visible contact circle on the cabinet surface at each mounting point.
Selecting This 3 In Cabinet Handle
This Amerock Corporation Blythe Series 3 in center-to-center weathered nickel pull pairs a 3-5/8 in overall length with a 1-1/4 in projection, which delivers a compact footprint and consistent finger clearance for doors and drawers. The zinc die-cast construction and Blythe Collection detailing provide a defined traditional profile, which helps maintain a unified look across multiple cabinet faces. Using the BP55222WN part number when ordering from Wurth Baer Supply ties you directly to this exact size, finish, and series, which supports uniform results across current projects and later additions.