Berenson Art Nouveau Verona Bronze 1-3/8" (35 mm) Diameter Knob, 4017-10VB-P

Berenson Art Nouveau Knob For Cabinet Projects

Berenson Art Nouveau knob describes a zinc die cast cabinet knob from the Berenson Corporation Art Nouveau Series, so every pull point on a cabinet or furniture piece keeps a consistent style across the job. The 1-3/8 inch diameter head creates a comfortable grip area, which helps doors and drawers open cleanly when hands are wet, gloved, or off-center. A projection of 1-1/8 inch spaces the hand away from the surface, which reduces knuckle contact on face frames and detailed profiles. The Verona Bronze finish ties into warm-toned fronts, so the hardware line supports traditional and transitional layouts in shops or on site. A base diameter of 5/16 inch keeps the footprint compact, which can help when laying out tight rail-and-stile patterns or narrow drawer fronts where larger rosettes would crowd nearby details.

Key Art Nouveau Knob Details That Matter

• The 1-3/8 inch diameter and 1-1/8 inch projection work together to balance hand clearance and scale, which helps maintain even sight lines when mixing this knob across cabinet doors and drawers in the same run.
• The Verona Bronze finish on this knob establishes a consistent warm metallic tone, which supports repeatable color matching when multiple knobs are placed across a kitchen, bath, or built-in project.
• The zinc die cast construction provides a uniform molded form, which helps installers achieve identical profiles and edges from knob to knob along long banks of cabinetry.
• The 5/16 inch base diameter keeps the mounting footprint small, which gives layout flexibility on narrow rails, stile edges, and smaller drawer fronts without overlapping panel details.
• The 1-3/8 inch width dimension matches the stated diameter, which simplifies layout measurements when spacing knobs evenly from door edges or aligning with existing drilling patterns.

Cabinet Knob Dimensions For Straightforward Mounting

This Berenson Corporation knob is specified with a 1-3/8 inch diameter and width, which helps installers translate drawings directly into drilling locations without additional scale conversions. The knob projection of 1-1/8 inch defines how far the gripping surface stands off the cabinet face, which is useful when checking clearance near adjacent walls, appliance panels, or decorative trim. A base diameter of 5/16 inch keeps the contact point modest, which can reduce the need for extensive surface preparation around the mounting hole. The product data lists an 8-32 x 1 inch screw size, which indicates the thread standard this knob is designed to work with in typical cabinet door and drawer front thickness ranges.

Using This Verona Bronze Knob In Real Projects

Where This 1-3/8 Inch Knob Fits Best

This Art Nouveau Series knob from Berenson Corporation, with its 1-3/8 inch diameter, suits cabinet doors and drawers that need a pull point large enough for a full finger grip while still reading as refined hardware. The matching 1-3/8 inch width allows the knob head to sit proportionally on standard kitchen and bath fronts, so installers can carry the same part number across uppers, bases, and vanities. The Verona Bronze finish is specified for this knob, which positions it well on stained woods, painted warm neutrals, and other finishes where a bronze tone helps tie hardware into hinges or decorative moldings. Because the projection is set at 1-1/8 inch, the knob provides clearance over typical face frames and slab fronts, helping maintain usability on thicker or profiled doors.

Details That Support Accurate Layout And Replacement

The combination of a 1-3/8 inch head diameter and 5/16 inch base diameter gives installers clear edges to reference when centering the knob on stile widths or drawer faces, which helps maintain even margins around the hardware. The specified 8-32 x 1 inch screw size identifies a common cabinet knob thread, so shops familiar with this standard can coordinate drilling operations and material thickness planning around it. The zinc die cast material ensures that each knob originates from a molded form, which supports consistent sizing when replacing existing Art Nouveau Series knobs on a refacing or upgrade project. The Verona Bronze finish designation on part number 4017-10VB-P ties the appearance to a specific finish name, which aids in matching this knob to other Berenson decorative hardware in the same color family across a larger installation.

Common Questions About This Art Nouveau Knob

Select This Verona Bronze Knob For Coordinated Work

The Berenson Art Nouveau Series Verona Bronze 1-3/8 inch diameter knob combines a defined set of dimensions, zinc die cast construction, and a named Verona Bronze finish, so cabinet shops and installers can plan layouts and finish schemes around a known part. Using the 4017-10VB-P identifier and the specified 8-32 x 1 inch screw size, it aligns with standard cabinet hardware practices and supports consistent results across doors, drawers, and future additions. Add this knob to your next run where a warm bronze Art Nouveau profile is part of the overall cabinet hardware plan.