3"/3-1/2" Art Nouveau Arch Pull, Vintage Nickel

3 Inch 3-1/2 Inch Art Nouveau Pull For Cabinets

3 inch 3-1/2 inch Art Nouveau pull describes a Berenson Corporation arch pull designed for cabinet and furniture doors where two different center to center options are needed on one part. The pull is part of the Art Nouveau collection, so it brings a coordinated style when used alongside other pieces from the same line. The zinc die cast material creates a solid metal body that holds threads well in cabinet applications, which matters when you are tightening 8-32 machine screws through a variety of door and drawer materials. A vintage nickel finish puts a muted metallic look on the surface, which suits projects aiming for a traditional or transitional appearance. The curved arch shape provides clearance over the door face, helping fingers wrap around the pull comfortably during everyday use.

Key Art Nouveau Arch Pull Details For Projects

• The pull uses zinc die cast construction, which gives a metal body that supports repeated opening and closing in typical cabinet and furniture environments where a rigid handle is required.
• A vintage nickel finish covers the pull, providing a muted metallic surface that visually matches other vintage nickel decorative hardware on the same installation for a consistent look.
• A 5-1/4 inch overall length spans across the door or drawer front, offering a visual proportion that works well on many standard cabinet widths without dominating narrow faces.
• The 1-1/4 inch projection brings the grip out from the mounting surface, creating hand clearance between fingers and the cabinet front for practical everyday operation.
• A width of 11/16 inch gives the pull a slim front profile, which keeps it visually light while still presenting enough surface area for a comfortable finger grip.
• A base diameter of 9/16 inch defines the footprint at each mounting point, helping installers understand how much surface area will be covered around the screw holes on the cabinet face.

Center To Center Mounting And Fit Details

This Berenson 4135-1VTN-P pull provides 3 inch and 3-1/2 inch center to center mounting, so it can align with either hole spacing when retrofitting or planning new drilling patterns. The dual center to center layout lets one part handle two common spread dimensions, which reduces part variety on a job that mixes these layouts. The pull is fastened using 8-32 x 1 inch screws, meaning it works with a standard cabinet hardware thread size. The specified screw length supports typical cabinet door and drawer front thicknesses where machine screws pass through from the back side into the zinc die cast body. The arch shape and projection work together with these mounting points to keep the grip away from the surface, which helps when working with thicker edge profiles or decorative door details.

Using This Berenson Pull In Real Projects

Where This Vintage Nickel Cabinet Pull Fits Best

The Art Nouveau arch pull from Berenson Corporation belongs in decorative hardware and moldings work, especially handles and pulls on cabinets and furniture fronts. The vintage nickel finish lets it sit comfortably on projects that call for a softer metal tone, such as kitchens, baths, or built-ins using other vintage nickel components. Its 5-1/4 inch overall length works well across standard cabinet doors and on medium drawers, giving enough span for a solid hand grip without overwhelming the panel. The 3 inch and 3-1/2 inch center to center options built into this single pull allow it to be used across runs where existing drilling varies between these two measurements. That flexibility supports updates on mixed cabinetry where some fronts are drilled at 3 inch and others at 3-1/2 inch, while keeping the same profile and finish across the space. With a width of 11/16 inch and a base diameter of 9/16 inch, the pull covers the immediate area around each mounting point, which helps visually frame the hardware against the door or drawer face.

Details That Support Accurate Mounting And Alignment

The combination of 3 inch and 3-1/2 inch center to center spacing in one pull has direct implications for layout and drilling. On retrofit work, those two spacing options mean the Berenson 4135-1VTN-P can match many existing hole patterns without altering the cabinet front, which saves surface repair time. On new installations, knowing the 5-1/4 inch overall length allows precise placement relative to door edges and drawer fronts so adjacent pulls line up evenly along a run. The 1-1/4 inch projection defines how far the handle stands off the front, which matters when fronts have applied trim or raised panels that require extra finger clearance. Using 8-32 x 1 inch screws gives installers a predictable thread and shank length to work with across typical cabinet materials, which streamlines hardware installation when many pulls are being mounted in sequence. The zinc die cast material supports clean internal threading for those 8-32 screws, helping the connection stay secure as doors and drawers are used. The vintage nickel finish also aligns with other vintage nickel hardware on the project, which helps maintain a uniform appearance when aligning knobs, pulls, and hinges across a bank of cabinets.

Common Questions About This Art Nouveau Pull

Select This Pull For Dual Spacing Cabinet Runs

The Berenson Corporation 3 inch/3-1/2 inch Art Nouveau arch pull in vintage nickel combines zinc die cast construction, dual center to center mounting, and a 5-1/4 inch length for flexible cabinet and furniture layouts. The 1-1/4 inch projection and 11/16 inch width balance hand clearance with a slim profile that suits a range of door and drawer sizes. When projects call for vintage nickel decorative hardware and mixed 3 inch and 3-1/2 inch drilling, this pull provides a single, consistent solution ready for installation on multiple fronts.