Berenson Hearthstone Series 3" (76 mm) Center to Center Verona Bronze Pull, - 4063-10VB-P
Description
Berenson Hearthstone Pull 3 Inch For Cabinets
Berenson Hearthstone pull 3 inch describes a cabinet handle from the Hearthstone Collection designed by Berenson Corporation that uses a 3 inch center to center hole spacing, giving a consistent drilling layout for doors and drawer fronts across a project. The pull is made from zinc die cast material, creating a rigid body that holds its shape when fastened to cabinet faces during everyday use. A Verona Bronze finish on the pull provides a dark, warm tone that supports traditional and transitional cabinet styles where a bronze color is desired. The pull length of 3-15/16 inches supplies edge-to-edge coverage slightly longer than the 3 inch center spacing, helping visually balance face frames and drawer fronts. A projection of 1-3/8 inches stands the pull off the cabinet surface, creating finger clearance for gripping and opening. The 3/8 inch width and 13/16 inch base give a compact front profile that fits smaller drawer fronts or narrow rails while still presenting a defined handhold.
Key Hearthstone Verona Bronze Pull Details
- The Hearthstone Collection identity connects this pull to a coordinated Berenson decorative hardware family, which supports visual continuity when the same style is used across multiple cabinet runs.
- Zinc die cast construction forms a single, solid cabinet pull body that maintains alignment under normal opening forces, supporting long-term, repeatable operation on frequently used doors and drawers.
- The Verona Bronze finish establishes a specific bronze tone that pairs with similarly colored hinges or decorative hardware, simplifying finish matching on jobs where bronze is the chosen metal color.
- An overall length of 3-15/16 inches covers the span between the 3 inch hole centers with some overhang, which helps visually center the pull and align it with rails and stiles on cabinet faces.
- A projection of 1-3/8 inches provides stand-off from the door or drawer front, giving room for fingers to wrap behind the bar and improving grip when operating heavier or full-extension drawers.
- A base size of 13/16 inches and a 3/8 inch width keep the footprint compact on the surface, which is useful where rail height is limited or where a slimmer front appearance is part of the design.
Mounting The 3 Inch Center To Center Pull
The 3 inch center to center drilling on this Berenson Hearthstone Series pull sets a fixed distance between the fastener points, guiding hole layout on cabinet doors and drawers that use this standard spacing. The pull length of 3-15/16 inches means the bar extends slightly beyond the hole locations on each side, which helps installers visually judge equal reveal to nearby edges while marking positions. A projection of 1-3/8 inches spaces the gripping surface off the cabinet face so hands clear door edges and trim during operation. The 13/16 inch base area provides a defined contact patch against the cabinet surface, helping the pull seat evenly when tightened. The 3/8 inch width along the bar presents a narrow front profile, which can simplify aligning multiple pulls in a straight visual line across a bank of drawers.
Using This Verona Bronze Cabinet Pull On Projects
Where The Hearthstone Series Pull Fits Best
The SAP description for this product identifies it as a Hearthstone pull with 3 inch center to center spacing in Verona Bronze, positioning it as a handle for cabinet doors and drawers that follow this common drilling standard. Being part of the Hearthstone Collection gives the pull a defined style family, which helps maintain a consistent look when specified across kitchens, baths, or built-in casework that call for a unified hardware line. The 3-15/16 inch length works well on smaller to mid-size fronts, because the bar extends beyond the mounting holes enough to look substantial without overwhelming narrow rails. A projection of 1-3/8 inches is suited to everyday cabinet use where users need enough clearance to grip from above, below, or the side without contact against the door face. The Verona Bronze finish supports design schemes that call for a bronze tone, allowing the pull to coordinate with other Verona Bronze decorative elements on the same project.
Why These Pull Dimensions Support Consistent Results
The fixed 3 inch center to center measurement on this Berenson Hearthstone Series 4063-10VB-P pull allows jigs and templates that use 3 inch spacing to be applied repeatedly across a run of cabinets, promoting consistent hole placement. The 3-15/16 inch overall length offers a clear visual alignment reference, helping installers center the pull on drawer fronts by matching equal reveal at each end relative to cabinet edges. The 1-3/8 inch projection not only supplies room for fingers but also keeps the gripping point close enough to the door surface for controlled opening, which is useful on heavier fronts. A 13/16 inch base gives sufficient surface for the pull to register flat against the cabinet face, supporting stable seating when tightened. The 3/8 inch width controls how far the pull extends horizontally, helping maintain a proportional look on narrow drawer fronts and aligning well when multiple pulls are installed in a straight horizontal row. The Verona Bronze finish ties each of these functional dimensions into a coordinated visual presence, aligning color and form on finished casework.
Common Questions About This Berenson Cabinet Pull
What is the center to center size of this pull?
The Berenson Hearthstone Series 4063-10VB-P pull has a 3 inch center to center measurement, which matches standard cabinet drilling patterns and supports straightforward layout across doors and drawers.
How long is the Hearthstone Verona Bronze pull overall?
The pull has an overall length of 3-15/16 inches, so it extends slightly beyond the 3 inch mounting holes, giving a balanced look on small to mid-size cabinet fronts.
What projection does this cabinet pull provide from the door?
The Berenson Hearthstone pull projects 1-3/8 inches from the cabinet face, creating finger clearance for gripping while keeping the handle close enough for controlled opening force.
What material is the 4063-10VB-P cabinet pull made from?
The 4063-10VB-P pull is made from zinc die cast material, giving the handle a solid, formed body that maintains shape when fastened to cabinet doors and drawers.
What finish does this Hearthstone Series pull use?
This Hearthstone Series pull uses a Verona Bronze finish, providing a specific bronze tone that coordinates with other Verona Bronze cabinet hardware on the same installation.
What are the base and width measurements of this pull?
The pull has a base measuring 13/16 inches and a width of 3/8 inches, giving a compact footprint suited to narrower rails and smaller drawer fronts.
Select This Hearthstone Pull For 3 Inch Layouts
The Berenson Hearthstone Series 3 inch center to center Verona Bronze pull, model 4063-10VB-P, combines zinc die cast construction with a defined 3 inch drilling pattern, helping align your cabinet hardware layout. Its 3-15/16 inch length, 1-3/8 inch projection, 13/16 inch base, and 3/8 inch width provide a compact yet functional profile for many cabinet door and drawer sizes. When a Verona Bronze finish and standard 3 inch center to center spacing are required on a project, this pull offers a coordinated style and known dimensions for planning layouts and executing installations.