Berenson Hearthstone 6 Inch Pull For Cabinets

Berenson Hearthstone 6 inch pull gives cabinets a brushed nickel handle sized for a 6 inch center to center layout, so existing drill patterns on many doors and drawers line up cleanly for straightforward upgrades or new installs. The pull is made from zinc die cast material, which provides a solid metal feel that supports everyday cabinet use in kitchens, baths, or shop-built casework. Its brushed nickel finish softens reflections while still reading as metal, helping the pull sit well against a wide range of painted or stained fronts. Overall length of 7-3/8 inches lets the handle visually span wider drawer fronts without looking undersized. A projection of 1-11/16 inches creates hand clearance between the grip and the cabinet face, so fingers can wrap around the pull without rubbing the door surface during operation.

Key Hearthstone Brushed Nickel Pull Details

• The 6 inch center to center dimension matches a common drilling pattern, which helps align this pull with standard cabinet layouts during installation and replacement work.
• A 7-3/8 inch overall length spreads the handle across more of the front, which gives larger drawers and doors a balanced look while still fitting typical residential cabinet widths.
• The pull is made from zinc die cast material, which creates a single, rigid component that supports repeated opening and closing on frequently used cabinets.
• A brushed nickel finish on the pull diffuses light across the surface, which reduces fingerprint visibility and helps the hardware blend with many nickel-toned hinges and fixtures.
• A projection of 1-11/16 inches sets the gripping area off the face, which improves hand access and reduces knuckle contact with the cabinet in day-to-day use.
• A width of 11/16 inches provides a defined edge to grab, which gives users a secure grip without adding bulk that might crowd adjacent hardware on narrow fronts.
• Base dimensions of 1-1/8 inches at each end cover the bore area, which helps conceal minor drilling tear-out around the mounting holes on the cabinet surface.
• The pull uses 8-32 thread sizing at the mounting points, which aligns with standard cabinet hardware tapping so fastener engagement is predictable during installation.

Cabinet Pull Fit, Layout, And Mounting Details

This Hearthstone series cabinet pull is designed with a 6 inch center to center measurement, giving installers a predictable spacing that aligns with common jig setups and factory-bored cabinet fronts. The 7-3/8 inch overall length leaves a short overhang beyond each mounting point, which keeps the ends clear of neighboring doors on typical face frame layouts. With a projection of 1-11/16 inches, the handle stands off the cabinet enough for full finger clearance when pulling heavier drawers. The pull width of 11/16 inches and 1-1/8 inch base dimensions help distribute visual weight without overpowering narrower rails, supporting consistent alignment when the same part is used across doors and drawers in a run.

Why This Berenson 4076-1BPN-P Pull Works

Where The Hearthstone Series Pull Fits Best

The Berenson Hearthstone series cabinet pull with 6 inch center to center spacing fits jobs that call for a longer handle across wider fronts, such as kitchen drawers or tall pantry doors. Its brushed nickel finish works alongside other brushed nickel cabinet hardware, helping installers maintain finish continuity across knobs, pulls, and hinges in the same space. The 7-3/8 inch overall length means the pull reaches far enough across a panel to feel substantial on full-overlay cabinetry while still sitting comfortably on smaller door styles. With 1-11/16 inch projection from the face, the handle stands out enough to clear decorative edge profiles, so the user grips the pull rather than the cabinet edge during operation. Width of 11/16 inches lets the pull sit proportionally on rails and stiles without crowding, which matters when hardware is laid out on narrow frames or inset doors.

Details That Support Consistent Cabinet Results

The 6 inch center to center specification on this Berenson 4076-1BPN-P pull simplifies repeatable drilling, since installers can use standard 6 inch templates across an entire project. Zinc die cast construction forms the pull as a single solid piece, giving the handle a uniform feel from end to end that supports a consistent user experience on every door and drawer. Base dimensions of 1-1/8 inches provide enough footprint to cover cleanly drilled mounting holes, which supports a finished look even when doors or drawer fronts are produced from dense materials that show drilling marks. The 8-32 mounting thread size lines up with common cabinet fastener standards, so thread engagement into the pull body is predictable across different thickness fronts. With a brushed nickel finish, the pull reads as a muted metal tone, which helps tie together appliances, faucets, and other brushed nickel cabinet hardware into one coordinated install.

Common Questions About This Hearthstone Cabinet Pull

Selecting This Pull For Cabinet Projects

The Berenson Hearthstone 6 inch pull in brushed nickel combines a 6 inch center to center layout, 7-3/8 inch overall length, and 1-11/16 inch projection to support practical gripping and clean alignment on cabinet doors and drawers. Zinc die cast construction and 11/16 inch grip width give the handle a solid, usable feel on frequently accessed fronts. For cabinet projects that call for brushed nickel hardware with consistent sizing across multiple openings, this Hearthstone series pull offers a defined set of dimensions that support repeatable drilling and a uniform look from piece to piece.