Berenson Metro Series Cabinet Pull For Clean Lines

Berenson Metro Series cabinet pull gives a straightforward 5-1/16 inch center to center grip that lines up well across doors and drawers, so layouts stay consistent from cabinet to cabinet. The 5-7/16 inch overall length provides a little overhang past the drilled holes, which helps with hand clearance and visual balance on common cabinet widths. A projection of 1-5/16 inch brings the pull far enough off the face for fingers to grab easily, which helps on heavier drawers. The 7/16 inch width keeps the profile slim, so the pull looks streamlined on modern fronts while still feeling solid in the hand. A polished chrome finish reflects surrounding surfaces, tying into other bright metal details on the job. Zinc die cast construction delivers a rigid pull body that supports everyday use on active kitchen or bath cabinets.

Key Metro Pull Details That Help On The Job

• The 5-1/16 inch (128 mm) center to center drilling matches a common cabinet pull standard, which simplifies layout, drilling, and straight-line alignment during installation.
• The 5-7/16 inch overall length adds slight extension beyond the screw centers, giving more gripping area and helping the pull look proportionate on both doors and drawers.
• The 1-5/16 inch projection creates space between the pull and the door or drawer face, improving finger clearance when opening heavier fronts or full-overlay applications.
• The 7/16 inch width keeps the pull visually light, which suits modern, flat-panel fronts while still offering enough bearing surface for a comfortable hand grip.
• The 3/8 inch base dimensions define a compact footprint at each end, which is useful when working near edge details, narrow rails, or existing profiles on the cabinet.
• The polished chrome finish gives a bright, reflective surface that visually matches other polished chrome decorative hardware throughout a room.
• The zinc die cast material provides a solid, stable pull body that responds well to repeated opening and closing in high-use cabinet locations.

Installation Details For This 128 mm Center Pull

This Metro pull uses a 5-1/16 inch (128 mm) center to center mounting pattern, so holes are drilled at that spacing for a straight, repeatable layout across multiple fronts. The pull is designed for threaded engagement using 8-32 screws, matching the specified 8-32 x 1 inch screw size, which ties directly into standard cabinet drilling practice. A 3/8 inch base at each end defines the bearing area against the door or drawer face, so the pull beds onto a small, predictable contact patch. The 1-5/16 inch projection works with this base size to keep leverage reasonable on the fasteners, which is important when the hardware is pulled at an angle during daily use.

Using The Polished Chrome Metro Pull In Projects

Where The 5-1/16 Inch Metro Pull Works Best

The 128 mm center to center layout fits well on many kitchen and bath cabinet doors where a mid-length pull is preferred, giving enough span for a full-hand grasp without overpowering a 12 to 18 inch front. On drawer fronts, the 5-7/16 inch overall length helps this Metro pull sit comfortably across common drawer widths, allowing a centered installation that still leaves good margin to each side. The polished chrome finish suits projects that already specify polished chrome decorative hardware, keeping hinge tips, faucets, and cabinet pulls visually consistent. Because the pull width is 7/16 inch, it presents a narrow bar on flat-panel or Shaker-style doors, supporting a modern look without hiding the door profile. The compact 3/8 inch base helps when installing near narrow rails or stiles, where a larger foot might crowd adjacent details or adjacent hardware lines.

Why These Metro Pull Dimensions Support Repeatable Results

The 5-1/16 inch (128 mm) center to center measurement is a widely used standard, so once jigs or boring patterns are set for this size, they can be applied across an entire run of cabinets for consistent results. The 5-7/16 inch overall length means there is a small, predictable amount of bar extending beyond each screw center, which keeps pulls aligned to visual sightlines when cabinets are ganged together. The 1-5/16 inch projection creates reliable clearance from the face, which is important when installers coordinate with door reveals and adjacent tall fronts. The 7/16 inch width makes layout more forgiving on narrow rails because the bar does not dominate the surface, helping maintain proportion on smaller doors. Zinc die cast construction adds a uniform, dense body that stays stable once fastened, supporting smooth operation as users repeatedly pull against the hardware. Together, these dimensions and materials allow cabinet runs to look aligned and function consistently from one opening to the next.

Common Questions About The Metro Chrome Pull

Select This Metro Pull For 128 mm Layouts

The Berenson Metro Series cabinet pull with 5-1/16 inch (128 mm) center to center spacing matches a common drilling standard, which helps keep your layouts straightforward across a full run of cabinets. Its 5-7/16 inch overall length, 1-5/16 inch projection, and 7/16 inch width create a practical mix of clearance and slim profile on both doors and drawers. With zinc die cast construction and a polished chrome finish, this Metro pull ties into polished chrome decorative hardware while standing up to regular cabinet use. Choose this 4114-1026-P model when a 128 mm center to center polished chrome pull fits the design and drilling pattern of your project.