Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf door mount kit lets selected Rev-A-Shelf basket systems attach to the cabinet door for a simpler one-step opening process. This door mount bracket is made by Rev-A-Shelf Corporation and is identified as the 5WB-DMKIT. The product is a metallic silver steel bracket kit sized at 1-1/2 inches wide, 2-1/8 inches deep, and 8 inches high. Rev-A-Shelf states that all RV, 5WB, and 5WC series can be attached to the cabinet door with this heavy duty kit. The six-way adjustable bracket design helps installers fine tune door position during setup. Buyers searching revashelf parts, rev a shelf basket hardware, or pullouts that open with the door should use this kit to add door-mount capability where series compatibility matches.
Key specs to confirm: This closet basket door mount kit is a steel bracket in metallic silver with overall dimensions of 1-1/2 inches wide, 2-1/8 inches deep, and 8 inches high. Rev-A-Shelf states it can attach all RV, 5WB, and 5WC series to the cabinet door. Before buying, confirm your basket series, cabinet door style, available clearance, and whether the six-way adjustable bracket range fits your installation. Load details, door weight limits, and any compliance or safety requirements are not provided in the verified data and should be confirmed with the manufacturer or technical documentation.
What's included: The verified data confirms a heavy duty door mount kit with a six-way adjustable door-mounting bracket. Packed and sold in each quantities. If you need exact hardware counts or fastener details, confirm them before ordering.
What to verify before ordering: Check that your unit is in the RV, 5WB, or 5WC series, confirm door thickness and mounting surface condition, review basket travel and hinge clearance, and verify whether your install needs extra hardware or series-specific instructions.
Many buyers add a cabinet door mount kit when they want the basket system to move with the door instead of opening the door first and then pulling the basket separately. In a closet, pantry, or utility cabinet, that one-step motion can make daily access more direct. The verified Rev-A-Shelf door mount kit is intended for all RV, 5WB, and 5WC series, so it is most useful for buyers already working with those matching product lines.
A common pain point with basket pullouts is alignment. If the door does not sit square, the basket can feel awkward to use or may not present the clean look the installer wants. Rev-A-Shelf addresses that concern with a six-way adjustable door-mounting bracket. That adjustability gives the installer more control during setup and helps when fine tuning door position after the hardware is mounted. If you are replacing older revashelf hardware or adding door-mount capability to existing pullouts, this bracket style is built around that practical adjustment need.
Another common issue is fit. Buyers often know they need a rev a shelf bracket, but they may not know whether the cabinet door, opening, or basket series is correct. This product page only confirms compatibility with RV, 5WB, and 5WC series. It does not confirm fit for other pull outs, trash cans, trashcans, garbage systems, or litter boxes, so those applications should not be assumed. If you reached this part through a search for RV DM17 KIT or a generic door mount bracket, compare your current series and dimensions before placing the order.
The listed dimensions also matter during planning. At 1-1/2 inches wide, 2-1/8 inches deep, and 8 inches high, the bracket has a defined footprint that should be checked against available mounting area and door clearance. In remodel work, where cabinet interiors vary and existing hardware may already be installed, that simple step can prevent return issues and installation delays.
When buyers compare a closet basket door mount kit, the first question is usually whether the part is a general bracket or a series-specific accessory. This Rev-A-Shelf closet basket bracket is clearly positioned as a branded accessory for the RV, 5WB, and 5WC series. That matters because a product tied to named series gives the buyer a stronger starting point for compatibility checks than an unlisted generic part.
Another point of comparison is adjustability. Some brackets simply attach a door with little room for correction. This door mount bracket is described as a six-way adjustable bracket, which is a practical advantage during installation because cabinet doors often need small alignment changes. For installers, that can mean less trial and error when matching the basket front to the door position.
Material and finish also matter when choosing replacement hardware. The verified data identifies steel construction and a metallic silver finish. Those are straightforward facts buyers can use when matching existing hardware or planning a new install. The dimensions provide another useful comparison point, especially if the cabinet interior is tight or if another accessory is already occupying nearby space.
For buyers comparing parts online, the safest path is to focus on verified series fit, bracket dimensions, and the included adjustment feature. If your project involves unknown door loads, custom fronts, unusual hinge geometry, or a use outside the listed series, confirm details with manufacturer documentation before ordering. That approach is more reliable than assuming one bracket works across all basket or pullout styles.
The Rev-A-Shelf door mount kit attaches selected basket systems to the cabinet door for a one-step opening process.
The door mount bracket is verified for all RV, 5WB, and 5WC series listed in the product description.
The cabinet door mount kit is only verified for RV, 5WB, and 5WC series, so other pullouts should be confirmed before ordering.
The Rev-A-Shelf bracket measures 1-1/2 inches wide, 2-1/8 inches deep, and 8 inches high.
The door mount bracket uses a six-way adjustable design to help with door alignment during installation.
The Rev-A-Shelf closet basket bracket is made from steel with a metallic silver finish.
The verified listing confirms a heavy duty door mount kit and adjustable bracket, but exact hardware counts should be confirmed before ordering.
The closet basket door mount kit should be checked against door swing, hinge clearance, and basket travel before purchase.
The verified product data identifies a closet basket bracket, so other uses like trash cans or litter boxes must be confirmed separately.
The Rev-A-Shelf door mount kit should be installed by following manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf closet basket bracket is a practical add-on when you need door-mounted access for a verified RV, 5WB, or 5WC basket system. The listing confirms steel construction, metallic silver finish, six-way adjustment, and bracket dimensions of 1-1/2 inches by 2-1/8 inches by 8 inches. Before purchase, confirm your exact series, cabinet door clearance, and any included hardware details needed for your install. That quick fit check helps you order the right door mount bracket the first time.
Sold In: 1 Each
