Rev-A-Shelf 5WB2 Chrome 17-3/4" 2-Shelf Pullout Organizer with Standard Slides, 5WB2-1822CR-1
Description
Choose a Rev-A-Shelf pull out organizer
Rev-A-Shelf pull out organizer gives base cabinets a two-tier storage format with open chrome wire shelves and standard slides. This Rev-A-Shelf 2-shelf pullout organizer is built for base cabinet use and mounts inside the cabinet on a U-shaped support bracket that is included. The wire shelf base pull out design helps users bring stored items forward instead of reaching deep into the cabinet. Heavy duty chrome wire frames and full extension ball bearing slides support smoother access, and the slides are rated at 100 lb. A telescoping rear mount improves adjustability during installation. For buyers comparing rev a shelf and revashelf cabinet organizers, this unit is the 5WB2-1822CR-1 model in the RS5WB2 series. Door mount kit parts are sold separately, so that detail should be checked before ordering.
Get more from a wire shelf base pull out
- Two-tier shelf system - The Rev-A-Shelf pull out organizer separates stored items across two levels, which helps reduce stacking and improves access in a base cabinet.
- Heavy gauge wire construction - The wire shelf base pull out uses a sturdy open-frame shelf design that keeps contents visible and easy to reach.
- Heavy duty chrome wire frames - The chrome pullout organizer finish gives the shelves a clean, durable appearance suited to kitchen and bath cabinet interiors.
- Precision full extension ball bearing slides rated at 100 lb - The 2-shelf pullout organizer extends fully so stored items at the back are easier to access.
- U-shaped support bracket included - The base cabinet pull-out system mounts to an included bracket, which simplifies the basic cabinet installation setup.
- Adjustable shelf height on the bracket - The Rev-A-Shelf organizer can be moved up or down on the support bracket to better suit cabinet contents and installation needs.
- Telescoping rear mount - The rear mount adds adjustability, which can help installers align the organizer inside the cabinet.
- Standard slides - This Rev-A-Shelf pull out organizer uses the standard slide configuration named in the product listing for buyers matching existing cabinet plans.
- Door mount kit sold separately - Buyers who want the cabinet door attached to the organizer should confirm the correct door mount kit before ordering.
Confirm base cabinet pull-out system fit
Key specs to confirm: This base cabinet pull-out system is a two-tier organizer with a listed size of 17-3/4 in. and 22 in., and the SAP description identifies it as 17.5 x 22. Buyers should confirm their cabinet opening, interior depth, interior width, and clear height before purchase. Because this organizer mounts inside the cabinet on a U-shaped bracket with a telescoping rear mount, it is also important to check floor clearance, rear wall conditions, and any hinge or frame interference. The verified slide rating is 100 lb. Any additional fit, compliance, or installation details not shown here should be confirmed with the manufacturer or technical documentation.
What's included: The verified included components are the two-tier organizer and the U-shaped support bracket. The bracket is included with all two-tier organizers in this series.
What to verify before ordering: Confirm cabinet interior dimensions, intended shelf height, slide clearance, and whether you need a separate door mount kit. Check that the cabinet layout allows full extension travel and bracket mounting at the cabinet base.
Use a chrome pullout organizer with confidence
Match a wire shelf base pull out to daily use
A chrome pullout organizer like this one is a practical choice when a base cabinet stores items that are hard to see or reach from the front. In many kitchen and bath cabinets, supplies end up pushed to the back, where stacked goods and cleaning items become difficult to retrieve. This Rev-A-Shelf pull out organizer addresses that problem with two open wire shelves that slide forward on full extension ball bearing slides. The open shelf design lets users see contents quickly, while the two-tier layout can help separate taller items from smaller supplies.
Professional installers often choose a wire shelf base pull out for projects where the cabinet box is already built and the owner wants better access without changing the whole cabinet. The included U-shaped support bracket mounts to the cabinet base, and the shelf height can be adjusted up or down on that bracket. That flexibility is useful when cabinet contents vary or when the installer needs to work around interior conditions. The telescoping rear mount also improves adjustability, which can help during alignment.
This 2-shelf pullout organizer is part of the RS5WB2 series and is listed as model RS5WB2-1822-CR in keyword searches, while the manufacturer part number is 5WB2-1822CR-1. Buyers searching rev a shelf or revashelf organizers often want to know whether the cabinet door attaches directly to the unit. For this product, the door mount kit is sold separately, so that item should be added only after confirming the cabinet design and preferred operation. If your project depends on a door-mounted pullout, verify the correct kit before ordering.
Another common use case is replacing fixed shelves with a pull-out format that improves access to cooking supplies, bath items, or general cabinet storage. Because the verified slide rating is 100 lb, buyers can use that load figure as part of their planning. If your application has unusual weight, cabinet obstructions, or special code requirements, confirm those details with the manufacturer installation guidance and local building requirements where applicable.
Compare a chrome pullout organizer by install details
When buyers compare this product type, the most useful differences are usually installation method, shelf construction, included hardware, and how far the organizer extends. This Rev-A-Shelf pull out organizer uses heavy gauge wire shelves, an included U-shaped bracket, and precision full extension ball bearing slides. Those verified details tell a buyer more than broad marketing language. Full extension matters because it helps bring stored contents forward. An included bracket matters because it affects installation planning. Adjustable height matters because cabinet interiors are not always identical.
Compared with basic fixed shelving, a base cabinet pull-out system can improve access because the shelves move toward the user. Compared with organizers that require extra fabrication, this unit is designed to fasten within the cabinet using the included bracket. Compared with options that may need separate planning for door attachment, this product clearly states that door mount kits are sold separately. That helps buyers avoid assuming that door-mount hardware is in the box.
Brand consistency also matters for repeat installs. Rev-A-Shelf is the listed brand for this organizer, and the product data clearly places it in base and wall cabinet pull-out systems, with this model intended for base cabinet use. For trade buyers ordering multiple cabinet accessories, that kind of product identity helps with specification matching and reorder accuracy. Before final selection, compare your cabinet opening, interior depth, and mounting conditions to the listed organizer size and included bracket setup, then confirm any missing fit details in technical documentation.
Check base cabinet pull-out system questions
What type of cabinet is this organizer made for?
This Rev-A-Shelf base cabinet pull-out system is made for base cabinets and mounts inside the cabinet on an included U-shaped support bracket.
How many shelves does this pullout organizer have?
This 2-shelf pullout organizer has two wire shelves in a two-tier configuration.
What size should I confirm before ordering?
This Rev-A-Shelf pull out organizer is listed at 17-3/4 in. and 22 in., so buyers should confirm cabinet interior width, depth, and clear height.
Are the mounting brackets included?
This chrome pullout organizer includes the U-shaped support bracket used to mount the organizer inside the cabinet.
Does this organizer include a door mount kit?
This Rev-A-Shelf organizer does not include a door mount kit because door mount kits are sold separately.
How far do the shelves extend?
This wire shelf base pull out uses full extension ball bearing slides, which bring the shelves forward for easier access.
What is the slide load rating?
This base cabinet pull-out system uses slides rated at 100 lb according to the verified product data.
Can the shelf position be adjusted during installation?
This Rev-A-Shelf pull out organizer has a bracket that allows the shelf height to be adjusted up and down.
What should I check inside the cabinet before installing it?
This 2-shelf pullout organizer requires enough interior width, depth, height, and slide travel clearance for the bracket and full extension movement.
Are there any special installation rules to follow?
This cabinet organizer should be installed by following manufacturer installation guidance and local building requirements where applicable.
Finish your Rev-A-Shelf pull out organizer order
Rev-A-Shelf pull out organizer is a practical base cabinet upgrade when you want two-tier wire storage, full extension access, and an included U-shaped mounting bracket. Before you place the order, confirm your cabinet interior dimensions, bracket mounting space, and whether a separate door mount kit is needed for your layout. This product includes the organizer and bracket, and the verified slide rating is 100 lb. A quick fit check now helps avoid cabinet clearance issues later.
Compare a 2-shelf pullout organizer for storage
This Rev-A-Shelf 2-shelf pullout organizer is designed for buyers who need a base cabinet organizer with open wire visibility, adjustable bracket mounting, and full extension slide access. If you are comparing cabinet storage options, focus on cabinet fit, included hardware, and whether separate door-mount parts are required for your install.
