Rev-A-Shelf 5WB2 Chrome 23-3/4" 2-Shelf Pullout Organizer with Standard Slides, 5WB2-2422CR-1

Choose a Rev-A-Shelf pull out organizer

Rev-A-Shelf pull out organizer gives base cabinets a two-tier storage layout with sliding access to stored items. This wire shelf pull out organizer from Rev-A-Shelf Corporation is part of the 5WB Series and uses a conventional open wire frame shelf design. The Rev-A-Shelf 5WB2 model installs inside a base cabinet and fastens to a U-shaped support bracket that mounts to the cabinet floor. The bracket is included and allows shelf height adjustment up and down. This base cabinet organizer also uses full extension ball bearing slides and heavy duty chrome wire frames. The slides are rated at 100 lb. For buyers planning a door-connected setup, the cabinet door mount kit is sold separately and should be added only after confirming fit.

See how this base cabinet organizer helps

• Two-tier shelf system - The 2-shelf pullout organizer adds vertical storage so buyers can separate supplies and reach items without unloading the whole cabinet.
• Heavy gauge wire shelf construction - The wire shelf pull out organizer uses a sturdy open frame design that helps with visibility and quick item access.
• Heavy duty chrome wire frames - The chrome pull out organizer provides a durable wire shelf format that fits many kitchen and bath cabinet storage tasks.
• Full extension ball bearing slides rated at 100 lb - Rev-A-Shelf includes slide hardware that lets the organizer extend outward for easier access to items stored toward the back.
• U-shaped support bracket included - The base cabinet pull out system mounts to the cabinet base with the included bracket, which simplifies planning for installation.
• Adjustable shelf height on the bracket - The bracket lets the shelves move up or down, helping buyers fine-tune clearance for taller or shorter stored items.
• Telescoping rear mount - Rev-A-Shelf 5WB2 includes a rear mount design that improves adjustability during installation inside the cabinet.
• Actual product width of 23-3/4 inches - The stated width helps buyers match the organizer to cabinet interior space before ordering.
• Actual product height of 19 inches and depth of 22 inches - These dimensions help confirm vertical and front-to-back fit inside the cabinet opening.
• Door mount kits sold separately - Buyers can plan for a cabinet door mount kit only if their installation requires door attachment.

Confirm wire shelf pull out organizer specs

Key specs to confirm: This wire shelf pull out organizer has an actual width of 23-3/4 inches, actual height of 19 inches, and actual depth of 22 inches. The product data also lists a maximum depth of 27 inches. Because this is a base cabinet pull out system that mounts to a U-shaped bracket on the cabinet floor, buyers should confirm interior cabinet width, clear height, usable depth, and any door or hinge interference before ordering. The slides are precision full extension ball bearing slides rated at 100 lb. Any additional compliance, safety, or technical documentation details not shown here should be confirmed with the manufacturer or current technical literature.

What's included: Verified included items are the two-tier organizer and the U-shaped support bracket with telescoping rear mount. All two-tier organizers come with the bracket. Door mount kits are sold separately.

What to verify before ordering: Confirm your cabinet is a base cabinet application, check that the 23-3/4 inch width and 22 inch depth fit your interior space, review door swing and hinge clearance, and confirm whether you need a separate cabinet door mount kit for your installation.

Compare this base cabinet pull out system

Use this two-shelf organizer for daily access

A 2-shelf pullout organizer is often chosen when a fixed base shelf leaves stored items hard to reach. In many kitchen and bath cabinet layouts, supplies get pushed to the back and become difficult to see. This Rev-A-Shelf pull out organizer addresses that problem with two open wire shelves that slide forward on full extension ball bearing slides. Because the shelves extend outward, a user can access items near the rear without removing everything in front first.

The open heavy gauge wire shelf design also helps buyers who want a clear view of stored contents. That can be useful for cleaning products, kitchen staples, or small containers that tend to disappear on a flat fixed shelf. The included U-shaped support bracket mounts to the base of the cabinet, and the bracket allows the shelf height to be adjusted up and down. That adjustability matters when the stored items are not all the same height or when the buyer wants to create better spacing between the two shelves.

This base cabinet organizer is a practical fit for installers and serious DIY buyers who want a chrome pull out organizer with verified mounting hardware included. The telescoping rear mount improves adjustability during install, which can help when cabinet depth conditions vary within the listed product limits. Buyers should still confirm the actual product width of 23-3/4 inches, actual height of 19 inches, and actual depth of 22 inches against the true interior cabinet space. If a cabinet door will be attached to the organizer, the cabinet door mount kit is not included and must be planned separately. Follow manufacturer installation guidance and local building requirements where applicable.

Compare wire shelf pull out organizer details

When buyers compare a wire shelf pull out organizer to other cabinet storage formats, the main differences usually come down to visibility, adjustability, and how the unit mounts. This Rev-A-Shelf 5WB2 model uses a conventional open wire frame shelf design, so contents stay visible from multiple angles. For many cabinet interiors, that makes routine access simpler than a closed storage format where items can be hidden from view.

The included U-shaped bracket is another point to compare. Some organizers require separate support parts or more involved planning before installation. Here, the bracket is included with the two-tier organizer, and the telescoping rear mount improves adjustability. That gives installers a clearer path when setting the organizer in the cabinet and aligning it for smooth travel. The shelf height adjustment also adds flexibility that can matter when cabinet contents change over time.

Slide construction is another useful comparison point. This base cabinet pull out system uses precision full extension ball bearing slides rated at 100 lb, which is a verified performance detail buyers can use when reviewing organizer hardware. The heavy duty chrome wire frame construction and stated dimensions provide a straightforward basis for fit checks. Instead of relying on assumptions, buyers should compare the actual product width, height, depth, and door-mount needs to the cabinet they are working with. That product-specific review helps reduce ordering mistakes and supports a cleaner installation plan.

Ask fit questions about this pull out organizer

Order the right chrome pull out organizer

Chrome pull out organizer selection starts with the cabinet opening, the true interior depth, and whether you need a separate door mount kit. This Rev-A-Shelf unit includes the two-tier organizer, the U-shaped support bracket, and the telescoping rear mount, while keeping shelf height adjustable after setup. Before purchase, confirm the 23-3/4 inch width, 19 inch height, and 22 inch depth against your cabinet interior, then review hinge and door clearance so the organizer installs as planned.