PRO Value 1-5/16" x 96" Round Closet Rod, Matte Black, 53435 51 023

Pro Value Series Matte Black Closet Rod Use

Pro Value Series matte black closet rod is a round aluminum hanging rod designed for closet organization where an 8 foot continuous run is needed. The 1-5/16 inch diameter creates a substantial hanging surface that supports typical garment loads across the full length. The 8 foot length lets installers span wider closet sections in a single piece, which reduces joints and helps maintain straight alignment in standard reach-in and many walk-in layouts. The aluminum construction keeps the rod weight down while still providing a rigid bar that is workable on site. The matte black finish gives a dark, uniform look that integrates with modern closet layouts where visible hardware becomes part of the design. The rod belongs to the Pro Value Series line, so it follows consistent sizing that supports repeat use across multiple closets.

Key Closet Rod Details For Installers

• The 1-5/16 inch diameter matches common closet tubing dimensions, so it nests properly in standard round flanges and supports stable hanging space across the run.
• The 8 foot length serves typical wall-to-wall or long panel-to-panel spans in closets, allowing a single straight piece for cleaner alignment and fewer cut joints.
• The aluminum material keeps the section lighter than many steel options, which simplifies handling, overhead positioning, and transport into finished spaces.
• The matte black finish provides a uniform dark appearance that visually ties in with black flanges and hardware, supporting coordinated open-closet and wardrobe designs.
• The wall thickness of 0.079 inch gives the round profile a solid feel under hanging loads while still allowing on-site cutting with appropriate metal-cutting tools.
• The Pro Value Series designation and part number 53435 51 023 give a repeatable reference for reorders, layout replication, and documentation on project takeoffs.

Closet Rod Sizing And On-Site Fit Planning

The 1-5/16 inch diameter provides a predictable interface for layout, since installers can design around a known centerline from the wall or panel face when pairing with matching flanges. The 8 foot length offers flexibility to trim to exact openings or use full-length where framing allows, supporting both custom and standard closet widths. The 0.079 inch wall thickness influences cutting behavior and end preparation, giving a sturdy edge after trimming. The aluminum construction responds well to typical metal-cutting saws, enabling clean site adjustments to the rod length. The matte black finish runs the full visible surface, so cut ends can be oriented toward side walls or captured in flanges to maintain a finished look in the active hanging zone.

Using This Round Aluminum Rod In Closets

Where This 1-5/16 Inch Closet Rod Fits

This 1-5/16 inch diameter aluminum rod fits closet layouts that call for a full-length hanging section across up to 8 feet, such as primary clothing runs in bedroom closets or longer sections in storage areas. The round profile suits standard round flanges from the same size class, allowing it to sit securely while carrying everyday garment loads. Because it is part of the Pro Value Series closet rods and flanges category, it aligns with broader shelf, closet, and garage organization projects that rely on matched tubing dimensions. The 8 foot length can bridge between wall-mounted supports or between cabinet-style panels, giving designers flexibility for continuous hanging space. The matte black finish works particularly well in open-rod applications where the hardware is visible and expected to coordinate with other dark components.

Details That Support Repeatable Closet Install Results

The consistent 1-5/16 inch diameter allows installers to standardize drilling locations, flange selection, and clearances from shelves, which is important when repeating the same configuration across multiple units or projects. The 0.079 inch wall thickness contributes to a solid feel while hanging clothing, supporting a straight line that resists visible deflection over typical spans. The aluminum body helps maintain that straight run without adding unnecessary weight to wall or panel structures, which can be valuable when integrating into pre-finished cabinetry. The scratch resistant matte black finish is one of five finishes available in this series, so it stays visually aligned with other rods in the project when the same finish family is chosen. The 8 foot stock length simplifies ordering for installers who prefer to work from full sticks, cutting to size as they lay out each opening while still referencing the same Pro Value Series part number 53435 51 023 for all similar runs.

Common Questions About This Matte Black Closet Rod

Selecting This Rod For Closet Runs

The Pro Value Series matte black 1-5/16 inch diameter by 8 foot aluminum closet rod gives installers a defined size, finish, and material combination tailored to organized hanging runs. The 0.079 inch wall thickness and aluminum body create a practical balance between rigidity and workability as you cut and place each span. The scratch resistant matte black finish supports projects where appearance matters across active closet zones. With the clearly identified part number 53435 51 023, it slots easily into takeoffs and repeat orders through Wurth Baer Supply for consistent closet layouts.