Knape and Vogt PDMTM 14-1/2" Birch 1-50 Quart Top-Mount Waste Pullout with White Bin and Standard Slides, PDMTM145-1-50WH

Knape And Vogt PDMTM Waste Pullout For Cabinets

Knape and Vogt PDMTM waste pullout PDMTM145-1-50WH is a top mount trash pullout that holds a 50 quart white plastic waste bin in a cabinet. The platform is made of multiply birch veneer, so the bin sits on a rigid wood base that handles normal kitchen cabinet use. Soft radius edges on the platform reduce sharp corners around the bin area, which helps during installation and daily access. This PDMTM model belongs to the KV PDMTM Series, which is described as KV's most affordable line of top mount trash pull-outs for door mount applications, so it fits cost-conscious cabinet projects needing a pull-out waste solution. The pullout uses standard slides, so the unit moves in and out on a familiar slide format that fits typical cabinet construction. The product is in the Top Mount Trash Pullouts class, so it is designed to mount from the cabinet top rather than the floor.

Key Trash Pullout Details For Cabinet Projects

• The KV PDMTM Series is KV's most affordable line of top mount trash pull-outs for door mount applications, so it supports projects where keeping hardware cost down matters while still using a purpose-built waste pullout.
• The platform is made of multiply birch veneer, so the installer gets a stable wood surface that resists flexing under the 50 quart waste bin during regular opening and closing.
• Soft radius edges on the birch platform reduce hard corners, which helps limit edge contact when loading the bin and when adjusting the door in tight cabinet interiors.
• Waste bins are available in white plastic, so the visible bin presents a neutral, cabinet-friendly color that suits most kitchen or bath interiors.
• Replacement bins are sold separately, which allows a worn or damaged white plastic bin to be swapped out later while keeping the original pullout hardware in place.
• The product sits in the Kitchen & Bath Cabinet Accessories Trash Pull-Outs category, signaling that it is intended for waste management inside cabinet spaces.

Top Mount Trash Pullout Installation And Adjustment

This PDMTM145-1-50WH model is a top mount trash pullout, so it fastens to the upper cabinet structure rather than the floor, which simplifies alignment in face-frame or frameless cabinets built for top mounting. The product uses door mount brackets, so the cabinet door attaches directly to the pullout frame for a single motion open-and-close. Door mount brackets are provided with 6-way adjustment, so the installer can move the door in multiple directions to fine-tune reveals and align it with adjacent fronts. The pullout uses standard slides with heavy duty precision ball bearings rated at 100 lb, so the slide system supports the waste bin, platform, and door motion within that weight range while providing a smooth travel path for daily use.

Using The PDMTM 50 Quart Pullout In Cabinet Work

Where This PDMTM Trash Pullout Is Applied

The Knape and Vogt PDMTM 14-1/2 inch birch 1-50 quart top-mount waste pullout with white bin and standard slides is designed for cabinet applications that need a single 50 quart bin stored behind a door. Being a top mount trash pullout in the Top Mount Trash Pullouts product class, it fits cabinet interiors set up for mounting rails or panels at the cabinet top, which keeps the bin platform off the cabinet floor. The KV PDMTM Series is identified as KV's most affordable line of top mount trash pull-outs for door mount applications, so it matches residential or light commercial cabinetry where a cost-effective, door-mounted waste pullout is required. Waste bins are available in white plastic, which suits typical kitchen or bath cabinet color schemes where a light bin color is preferred. Replacement bins are sold separately, allowing long-term service of the pullout in busy cabinet locations by changing just the bin when needed.

Details That Support Repeatable Door Alignment

The PDMTM145-1-50WH model uses door mount brackets with 6-way adjustment, so installers can shift the attached door up, down, left, right, in, and out to set consistent, tight reveals across a run of cabinets. That multi-directional adjustment helps compensate for cabinet variation and door thickness choices while still keeping the bin movement smooth. The platform is made of multiply birch veneer with soft radius edges, so it offers a robust surface for the 50 quart white plastic waste bin while leaving fewer sharp edges near the adjusting hardware. This helps during repeated adjustments or service when the door needs fine tuning after the cabinet is in use. The slides are heavy duty precision ball bearing slides rated at 100 lb, so the hardware supports the daily load of the bin, trash contents, birch platform, and attached door within that rating while keeping the motion consistent over time.

Common Questions About This PDMTM Waste Pullout

Selecting This PDMTM Pullout For Cabinet Use

The Knape and Vogt PDMTM waste pullout PDMTM145-1-50WH brings a 50 quart white plastic bin, multiply birch veneer platform, and top mount layout together for kitchen and bath cabinet interiors. The KV heavy duty precision ball bearing slides rated at 100 lb and 6-way adjustable door mount brackets support smooth motion and precise door alignment around the waste opening. For projects needing an affordable, door mount top mount trash pullout in the Kitchen & Bath Cabinet Accessories Trash Pull-Outs category, this PDMTM model offers a focused option for integrating a single-bin waste solution into cabinet layouts.