Frosted Nickel Tray Divider for Upright Flat-Item Storage

This Knape and Vogt TDRO tray organizer rolls out of a base cabinet on four divider shelves to store baking sheets, cutting boards, serving platters, and similar flat items upright and within reach.

Key Features

• Four vertical divider shelves hold flat items upright so they stand separately and slide out without stacking.
• Frosted Nickel finish gives the wood frame a contemporary, low-sheen metal look that suits modern and transitional kitchens.
• Pull-out design brings the full unit forward so every slot is accessible without reaching to the back of the cabinet.
• Non-handed orientation installs in a left- or right-side cabinet without modification.
• Minimum cabinet opening of 9-3/16 inches wide, 14-1/2 inches tall, and 22-3/4 inches deep sets the fit requirement for the base cabinet.

Flat Items Off the Cabinet Floor and Easy to Grab

Baking sheets, cutting boards, trays, and platters are awkward to stack flat in a base cabinet. They shift when the stack is disturbed, and the one you need is always at the bottom. This tray organizer stands each item vertically in its own slot between the four divider shelves, so pulling out a single sheet or board does not require lifting everything above it. The pull-out motion brings all four slots into the open at once, so the choice is visible and the retrieval is a single move rather than a dig.

Wood Construction in a Frosted Nickel Finish

The organizer is built from wood and finished in Frosted Nickel, a muted metallic tone that reads as a contemporary accent inside the cabinet. The finish coordinates naturally with brushed and satin metal hardware in a modern or transitional kitchen without competing with warmer wood tones in the cabinet interior. At 8-11/16 inches wide and 14 inches tall, the unit is sized for a narrow base cabinet slot where a wider organizer would not fit.

Where This Organizer Works Best

This is the right pull-out for a cook who bakes regularly and wants every sheet pan and cooling rack stored vertically and retrievable in one motion. It fits equally well in a kitchen remodel where a designer is specifying pull-outs for a narrow base run, or in a cabinet shop building a full-access base layout. Because the unit is non-handed, it drops into either side of a cabinet bank without reorienting the hardware. For face-frame and frameless cabinets alike, confirm the opening dimensions against the minimums before ordering, since the depth requirement of 22-3/4 inches is the spec most likely to vary in shallower base cabinets.

Common Questions

The Right Slot for Every Flat Item in the Kitchen

Choose this pull-out to keep baking sheets, boards, and trays standing upright and accessible in a narrow base cabinet, finished in a Frosted Nickel that suits a contemporary build.