Knape and Vogt TSC 14-1/2" Birch 1-35 Quart Top-Mount Waste Pullout with Platinum Bin and Soft-Close Slides, TSC15-1-35PT

A 14-1/2 Inch Top-Mount Waste Pullout For Soft-Close Control in a Narrow Base Cabinet

This Knape and Vogt TSC waste pullout mounts at the top of the cabinet interior to hold a single 35 quart bin behind a base cabinet door, rolling out for access and returning under controlled soft-close motion.

Key Features

• Top-mount slide design positions the hardware above the bin for a clean, open bottom and straightforward bin removal.
• Soft-close slides pull the carriage to a quiet, controlled close so the door never slams.
• Single 35 quart Platinum bin included gives this unit a ready-to-use configuration out of the box.
• Door-mount compatible so the bin rolls out automatically when the cabinet door opens.
• 100 pound weight capacity handles a loaded bin without strain on the slides.
• Fits a minimum cabinet opening of 14-1/2 inches wide, 18 inches tall, and 23-3/8 inches deep for a precise fit check before ordering.

Built Around the Way a Kitchen Runs

A top-mount pullout keeps the slide hardware up and out of the way, which means the bin sits with a clear floor beneath it and lifts straight out for emptying without fighting the mechanism. When the door swings open, the carriage follows. When the door closes, the soft-close slides take over and bring it home quietly, even if the push is harder than intended. For a narrow base cabinet in a busy kitchen, that combination of easy bin access and controlled return reduces one more source of noise and wear in a high-traffic run.

Carriage, Finish, and Motion

The carriage is finished in Birch, a neutral tone that blends into the cabinet interior rather than drawing attention. The included bin is Platinum, a light metallic finish. The bin is sized at 35 quarts, which is substantial enough for a main kitchen trash station without requiring a wider opening. The soft-close mechanism is built into the slide assembly, not an add-on, so the damped close is consistent across the life of the unit.

Where This Pullout Fits Best

Specify this unit in a standard base cabinet where depth and height are available but width is the constraint. The 14-1/2 inch minimum opening width makes it the right choice for a narrower run where a wider double-bin carriage will not fit, and where a single waste station is enough. It suits a kitchen remodel, a cabinet shop building custom runs to a tight footprint, or a contractor sourcing hardware for a production install where soft-close motion is specified throughout. Measure the cabinet opening against all three minimum dimensions before committing, since the depth requirement of 23-3/8 inches is the spec most often overlooked in a standard 24-inch base cabinet.

Common Questions

Quiet Return, Clean Cabinet

This top-mount pullout keeps a 35 quart bin out of sight in a narrow base cabinet and brings it back under soft-close control every time the door closes.