KV 35 quart Platinum Trash Can Lid, 14-1/2"W x 3/4"H x 9-7/16"D - QT35LB-PT

Knape And Vogt 35 Quart Platinum Trash Can Lid

Knape and Vogt 35 quart platinum trash can is described here as a replacement lid sized 14-1/2 inches wide, 3/4 inch high, and 9-7/16 inches deep, so it fits KV 35 quart waste containers with those matching dimensions in pull out applications. The QT35LB-PT trash bin lid is part of the Replacement Bins and Accessories product class, so it serves as a direct component change when you need to restore or standardize a Knape and Vogt trash pull out system. The 35QT platinum trash bin lid is designed for any type of KV trash pull out bins, which allows one lid style to work across multiple KV pull out waste systems built for this 35 quart size. The SAP description 35QT PLATINUM TRASH BIN LID confirms the platinum finish, which helps installers match the lid appearance to existing KV platinum waste containers in kitchen or bath cabinets.

Key Trash Bin Lid Details For Cabinet Work

• The Knape and Vogt 35 quart platinum trash can lid is designed for any type of KV trash pull out bins, so one lid style can service various KV pull out units and simplify replacement choices on repeat projects using this 35 quart format.
• The QT35LB-PT trash bin lid dimensions of 14-1/2 inches wide, 3/4 inch high, and 9-7/16 inches deep define the footprint, so installers can match this to the existing waste container and confirm that the lid sits properly within the pull out frame.
• The SAP description 35QT PLATINUM TRASH BIN LID identifies the platinum finish, so shop teams can coordinate visual details with KV platinum waste containers and maintain a consistent look across multiple pull out trash stations.
• The classification as Replacement Bins and Accessories shows this QT35LB-PT trash bin lid is intended as a service or upgrade part, which helps planners build standard parts lists for maintaining KV trash pull out installations over time.
• The KV trash pull out bin lid design for 35 quart units supports use in kitchen and bath cabinet applications, so fabricators can integrate concealed waste solutions that align with the existing Knape and Vogt pull out hardware already specified.

Height Planning And Cabinet Measuring For QT35LB-PT

The QT35LB-PT trash bin lid is stated to add to the height of the FYUSC series waste containers, so installers factor that added 3/4 inch element into their cabinet layout to keep the pull out operating without interference. The product guidance recommends adding a 3/4 inch height to the FYUSC series waste containers when using this lid, which directly affects rail positioning, face frame clearance, and any interior obstructions above the container. This KV FYUSC waste container lid note ties cabinet opening height and pull out travel to a known dimension change, so drafters and installers can plan margin above the container carefully rather than relying on trial and error at install time.

Using This 35 Quart Lid In Cabinet Projects

Where This KV Trash Pull Out Lid Fits Best

The Knape and Vogt 35 quart platinum trash can lid is designed for any type of KV trash pull out bins sized to this 35 quart footprint, which suits common kitchen and bath cabinet waste pull outs that already use Knape and Vogt systems. The QT35LB-PT trash bin lid dimensions of 14-1/2 inches wide and 9-7/16 inches deep match the contour of corresponding KV 35 quart waste containers, so the lid rests directly over the container body in the pull out cradle. The 3/4 inch height of this replacement lid defines how much vertical space the cover occupies above the container rim, so installers can align it within framed, frameless, or utility cabinet interiors where overhead clearances may be tight. The platinum finish identified in the SAP description 35QT PLATINUM TRASH BIN LID ties in visually with KV platinum waste containers, so designers can keep a uniform look when multiple pull out trash stations are used in a run of cabinetry.

Why QT35LB-PT Dimensions Support Repeatable Work

The QT35LB-PT trash bin lid being part of the Replacement Bins and Accessories product class means its sizing and interface are standardized around existing KV 35 quart pull out systems, so shops can repeat the same part number across many jobs with predictable results. The note that these lids will add to the height of the FYUSC series waste containers and the recommendation to add a 3/4 inch height to the product used give a fixed number for drawings, so project drafters can build that extra height into cabinet cut lists and elevation details. This known 3/4 inch increase influences where pull out slides and fronts are set relative to the cabinet opening, so installers can maintain smooth travel and avoid contact at the face frame or countertop. Because the KV trash pull out bin lid is designed for any type of KV trash pull out bins, it streamlines maintenance programs, allowing facility teams or millwork shops to stock QT35LB-PT as a single go-to lid solution for 35 quart KV pull out waste containers.

Common Questions About QT35LB-PT Trash Bin Lid

Select QT35LB-PT For 35 Quart KV Pull Outs

The Knape and Vogt 35 quart platinum trash can lid with part number QT35LB-PT provides a defined 14-1/2 inch by 9-7/16 inch footprint and 3/4 inch height, so it slots into KV 35 quart trash pull out bins with predictable clearances. The design for any type of KV trash pull out bins and the specific note about adding a 3/4 inch height on FYUSC series waste containers give fabricators solid numbers for cabinet layout and repeat work. For projects standardizing on Knape and Vogt 35 quart pull out waste systems, selecting the QT35LB-PT trash bin lid helps align appearance and dimensions across all matching cabinet stations.