KV 20 quart White Trash Can Lid, 14-1/2"W x 3/4"H x 7-7/16"D - QT20LB-WH

Knape And Vogt 20 Quart Trash Can Lid Use

Knape and Vogt 20 quart trash can lid gives a fitted top for KV trash pull out bins, so the container has a defined upper edge that helps keep waste confined inside the bin area during cabinet operation. The 20 quart sizing ties directly to common KV pull out waste containers, which helps installers match this lid to bins already specified in a project. The white finish coordinates with the listed white KV trash can bodies, so the bin and lid present a uniform look inside kitchen or bath cabinetry. With a footprint tied to 14-1/2 inch width and 7-7/16 inch depth, this lid works with bin bodies built around the same plan dimensions, which supports straightforward selection when working from cabinet drawings. As a replacement component, this part number QT20LB-WH lets shops reorder the same lid style whenever a matching top is required for service or future builds.

Key Lid Details That Support Cabinet Work

• The lid is described as 20 quart, so it aligns with 20 quart KV trash pull out bins, helping installers match capacity when upgrading or maintaining existing pull out waste systems in kitchen or bath cabinets.
• The white color coordinates with white KV trash cans, so the bin and lid present a consistent interior appearance that suits light cabinet interiors and helps designers maintain a clean, unified look across multiple openings.
• The 14-1/2 inch width dimension defines the lateral footprint over the trash can, guiding cabinet and pull out frame layouts that need to clear guides, drawer fronts, and adjacent hardware inside face frame or frameless boxes.
• The 7-7/16 inch depth dimension sets the front-to-back coverage over the bin opening, supporting planning around door swing or pull out travel where depth clearances inside the cabinet are already fixed by appliance or plumbing layouts.
• The stated 3/4 inch height value shows how tall the lid stands on the waste container, giving millworkers a concrete dimension to factor when checking interference with pull out rails, face frames, or internal cross rails.

Trash Pull Out Lid Fit, Height, And Layout

This 20 quart lid is designed for any type of KV trash pull out bins, so it functions as a dedicated top section that pairs with KV waste containers already integrated into slide-out frames. The 3/4 inch height addition over the FYUSC series waste containers means the finished bin assembly stands higher once the lid is in place, which directly affects vertical clearances inside the cabinet. By adding 3/4 inch height to the FYUSC series waste container dimension, installers can plan stiles, rails, or internal shelves so the pull out travels freely without interference from the lid. The 14-1/2 inch width and 7-7/16 inch depth define a compact footprint over the container, allowing this lid to work within typical under-sink or base cabinet spaces where plumbing and hardware already compete for clearance.

Using This QT20LB-WH Lid In Real Projects

Where This 20 Quart Trash Bin Lid Fits Best

This QT20LB-WH lid is specified for any type of KV trash pull out bins, so it fits into projects where Knape and Vogt waste containers are already part of the hardware schedule. In kitchen base cabinets, the 14-1/2 inch width and 7-7/16 inch depth allow the lid to sit over the bin within typical carcass dimensions, which is useful when a pull out must share space with sink basins or plumbing. The 20 quart capacity reference ties it directly to moderate-size waste stations, often used in smaller bays or secondary pull outs, so it suits layouts where a compact container is preferred. In bath cabinets, the white color matches white bins, supporting clean-looking trash management where interiors are often lighter and more visible during everyday use.

Height Impact And Consistent Replacement Results

The note that these lids add 3/4 inch height to FYUSC series waste containers gives a precise figure for installers building face frames or setting drawer front reveals, because the combined bin and lid height influences how the pull out clears internal rails. Adding this 3/4 inch to the product height being used allows clear planning of vertical openings so the lid does not contact the cabinet top during operation. When specifying QT20LB-WH as a replacement lid, the manufacturer part number keeps future orders consistent, which is important for shops standardizing on one bin and lid combination across multiple jobs. Because the lid is designed for KV trash pull out bins, it aligns with existing KV hardware layouts, so future change-outs can rely on the same clearances and dimensions already proven in the original cabinet design.

Common Questions About QT20LB-WH Trash Can Lid

Selecting This Lid For KV Trash Pull Outs

The QT20LB-WH 20 quart white trash bin lid from Knape and Vogt gives installers a defined top sized at 14-1/2 inches wide, 3/4 inch high, and 7-7/16 inches deep, designed for KV trash pull out bins. With a known 3/4 inch height addition on FYUSC series waste containers, it provides clear data for planning cabinet openings where vertical clearance is tight. For projects using KV trash pull out bins, choosing this lid locks in a repeatable dimension set and a matching white finish, supporting clean cabinet interiors and consistent hardware standards across multiple jobs.