KV 35 quart White Trash Can Lid, 14-1/2"W x 3/4"H x 9-7/16"D - QT35LB-WH

Knape And Vogt 35QT Trash Bin Lid Purpose

Knape and Vogt 35 quart trash can lid is a white lid sized for 35 quart KV waste containers, so it caps the container opening and helps keep the trash area visually cleaner in a finished cabinet pull out. The lid is designed for any type of KV trash pull out bins, so one part number can be applied across multiple Knape and Vogt pull out waste systems without changing your basic layout. With a nominal width of 14-1/2 inches, the lid covers standard 35 quart KV containers of that width, so the top edge aligns closely with the container walls for a consistent look. The 9-7/16 inch depth matches the front-to-back dimension of the container, so the lid footprint follows the bin profile and stays clear of typical slide hardware locations. The low 3/4 inch height keeps added profile minimal while still providing a defined closure over the container opening.

Key 35QT Trash Bin Lid Details For Projects

• The manufacturer part number QT35LB-WH identifies this specific 35 quart white trash bin lid, so it can be specified or reordered consistently across jobs using the same KV pull out waste layout.
• The 35 quart capacity reference ties this lid to 35 quart Knape and Vogt trash containers, so it aligns with common single can pull out modules where that container size is already established.
• The white finish coordinates with white KV waste containers, so the lid and bin present as a single unit inside the cabinet, which keeps the interior appearance uniform when the pull out is extended.
• The 14-1/2 inch width dimension is matched to the container width, so the lid overhang and side clearance can be accounted for when planning cabinet interior clearances around guides or side panels.
• The 9-7/16 inch depth dimension follows the bin front-to-back profile, so the lid footprint stays inside the container rim and avoids contact with typical rear obstructions within the cabinet bay.

Height Change And Cabinet Fit Considerations

The lid height of 3/4 inch is added to the top of the FYUSC series waste containers, so the overall container assembly stands 3/4 inch taller once this part is used. Knape and Vogt notes that it is recommended adding a 3/4 inch height to the product you are using, so cabinet interior vertical clearances need to account for that change when this lid is specified. This added height affects how the container moves under fixed rails or face frame cross members, so the lid is part of the total stack height when you plan the opening. Because the height addition is a simple, fixed value, it can be factored into shop drawings and cut lists without recalculating other dimensions.

Using This KV 35QT Lid In Cabinet Pull Outs

Where The Knape And Vogt QT35LB-WH Lid Fits Best

This Knape and Vogt waste container lid is designed for any type of KV trash pull out bins, so it works across Knape and Vogt pull out platforms that use 35 quart containers in cabinet bases. On FYUSC series waste containers, the lid sits on top of the existing container body, so it converts an open-top bin into a lidded unit without changing the slide system or frame. The stated 14-1/2 inch width and 9-7/16 inch depth define the footprint over the bin, so installers can visualize how the lid will sit in relation to adjacent containers or dividers in multi-bin pull outs. In a single 35 quart pull out, those dimensions help keep the lid centered over the container opening, so the bin remains easy to load when the pull out is extended to full travel.

Why These Lid Dimensions Support Repeatable Results

The fixed height addition of 3/4 inch provides a clear number to add to FYUSC series container heights, so cabinet makers can repeat the same opening size across multiple units without trial adjustments. Because this product is a 35 quart white trash bin lid with a defined 14-1/2 inch width, fabricators can standardize cabinet interior widths around the matched container-and-lid set for production runs. The 9-7/16 inch depth keeps the lid within the container footprint, so repeated installations in the same cabinet line avoid inconsistent interference at the back of the bay. Since the lid is designed for any type of KV trash pull out bins, service replacements in the field can use the same part number QT35LB-WH, which helps maintain consistent fit and appearance when bins are swapped later.

Common Questions About The QT35LB-WH Trash Lid

Selecting This 35QT Lid For Your KV Pull Outs

The Knape and Vogt 35 quart trash can lid QT35LB-WH provides a defined 3/4 inch height addition, so it drops into existing FYUSC series and other KV pull out layouts with predictable clearance. With 14-1/2 inch by 9-7/16 inch dimensions sized for 35 quart KV containers, it keeps the lid footprint aligned to the bin profile. For projects using Knape and Vogt trash pull out bins, specifying this 35 quart white trash bin lid standardizes both appearance and measured clearances across multiple cabinets.