KV 20 quart Platinum Trash Can Lid, 14-1/2"W x 3/4"H x 7-7/16"D - QT20LB-PT

Knape And Vogt 20 Quart Platinum Trash Can Use

Knape and Vogt 20 quart Platinum Trash Can gives you a dedicated lid solution sized at 14-1/2 inches wide, 3/4 inch high, and 7-7/16 inches deep, so installers can plan cabinet pull out layouts with a known footprint. The product is identified as QT20LB-PT, tying directly to Knape and Vogt trash management lines and helping match specifications when replacing or standardizing lids across a project. As a 20 quart Platinum trash can component in the Replacement Bins and Accessories class, it supports upgrades or service work on existing trash pull outs without changing the overall waste system concept. Being part of the Kitchen & Bath Cabinet Accessories group positions it squarely in the cabinet pull out zone where fit and height clearances are critical for doors, face frames, and drawer fronts.

Key Platinum Trash Can Lid Details For Installers

• The product is described as a 20 quart Platinum Trash Can, which defines the waste capacity category and helps align it with pull out systems sized around 20 quart containers in kitchen and bath cabinetry.
• The stated dimensions of 14-1/2 inches wide, 3/4 inch high, and 7-7/16 inches deep give a clear footprint, letting you relate lid size to the bin opening and to surrounding cabinet clearance.
• The QT20LB-PT part number ties directly to Knape and Vogt documentation, supporting straightforward identification when matching to existing pull out installations that already reference KV model numbers.
• The SAP description calling it a 20QT Platinum Trash Bin Lid reinforces its role as a lid component, which keeps expectations focused on covering waste containers rather than altering base hardware layouts.
• Being in the Replacement Bins and Accessories product class positions this item for repair or upgrade work, so bins in service can gain a lid solution without redesigning the entire waste pull out.
• Placement in the Kitchen & Bath Cabinet Accessories category links this lid directly to built-in cabinetry applications, helping trades plan around common sink base and utility cabinet waste setups.

Trash Can Lid Fit And Cabinet Height Planning

The web description states that this lid is designed for any type of KV trash pull out bins, which means it targets Knape and Vogt pull out waste systems and their bin sizes. The note that it will add 3/4 inch height to the FYUSC series waste containers ties directly to the 3/4 inch lid height, so installers can factor that increase when sizing openings. The instruction to add 3/4 inch height to the product used gives a defined adjustment value, allowing you to relate lid height to cabinet interior clearance around sinks, rails, or drawers. Because the description highlights cabinet measuring, the lid becomes part of the planning step when laying out pull out travel and door swing.

Using This QT20LB-PT Lid In Cabinet Projects

Where This Knape And Vogt Lid Is Applied

The product is specified as a Knape and Vogt 20 quart Platinum Trash Can in the Kitchen & Bath Cabinet Accessories category, so it is aimed at built-in cabinet environments rather than freestanding cans. As a Replacement Bins and Accessories part, it supports service work on existing pull out waste systems, especially when lids are being added to KV trash pull out bins already in place. The statement that it is designed for any type of KV trash pull out bins shows that it is intended to work across Knape and Vogt pull out bin styles, so trades using KV waste hardware can work within one ecosystem. Its 14-1/2 inch width and 7-7/16 inch depth define a compact footprint that suits typical under-sink or base cabinet waste locations where space around plumbing and dividers is tight.

Height Impact And Repeatable Cabinet Layout Results

The noted 3/4 inch height of the QT20LB-PT lid directly matches the note that lids will add 3/4 inch height to FYUSC series waste containers, creating a predictable total height change. That defined increase gives installers a fixed value when laying out vertical clearances under sink bowls, cabinet rails, or drawer boxes. Because the web description recommends adding a 3/4 inch height to the product in use, the lid height effectively becomes an adjustment factor you can use each time the lid is specified with an FYUSC series container. Being designed for any type of KV trash pull out bins means that once clearances are checked for one KV pull out setup, future similar installations using the same bin family can follow the same dimension logic. This repeatability helps standardize cabinet designs around a known trash can height profile when specifying Knape and Vogt waste systems.

Common Questions About QT20LB-PT Trash Can Lid

Choosing This QT20LB-PT Lid For KV Pull Outs

The Knape and Vogt 20 quart Platinum Trash Can, identified as QT20LB-PT, offers a defined 14-1/2 inch by 7-7/16 inch footprint and 3/4 inch height, so layout decisions rest on clear numbers. Being designed for any type of KV trash pull out bins and specified to add 3/4 inch height to FYUSC series waste containers, it fits directly into Knape and Vogt pull out planning. When a project calls for a Platinum trash bin lid within Kitchen & Bath Cabinet Accessories, this part number provides a targeted choice for cabinet-based waste systems.