Single 50 Quart 11-13/16" Platinum Bottom Mount Waste Pullout with 1-50 Quart Platinum Bin Soft-Close, USC12-1-50PT
Description
Single 50 Quart Bottom Mount Waste Pullout Solution
Single 50 Quart Bottom Mount Waste Pullout describes a Knape and Vogt USC Series soft-close trash pull-out that mounts to the cabinet floor and organizes a single 50 quart platinum waste bin, giving a dedicated, concealed waste station in a base cabinet.
This unit is part of the KV USC Series, which is described as KV's premium line of soft close trash pull-outs, so the integrated soft-close action controls the return of the pull-out, keeping the waste bin motion smooth and controlled during everyday use.
The product is identified as a bottom mount trash pull-out, so it fastens to the cabinet floor instead of the cabinet sides, which simplifies layout in many standard base cabinets and keeps alignment referenced from the bottom panel.
The bin in this model is platinum, and the frame finish is described as platinum, so the color coordination between bin and frame creates a single visual element that matches modern kitchen and bath cabinet interiors where a neutral, metallic tone is preferred.
The description notes that single bin units are 11-13/16 inches wide, so this unit is sized for narrow cabinet openings where a full-size waste solution is still required, helping use smaller base cabinets effectively for trash management.
Key Trash Pull-Out Details That Help Installs
- The KV USC Series is described as KV's premium line of soft close trash pull-outs, so this model is designed to offer soft-close performance that supports smooth operation in higher-use residential or light commercial cabinets.
- The unit uses heavy weight ball bearing slides that are concealed, so the slide hardware supports the pull-out while remaining out of sight, giving a cleaner appearance when the cabinet is open and a stable track during bin travel.
- The pull-out has a unique washable solid backsplash and solid floor, so debris stays on the pull-out platform instead of falling to the cabinet floor, which simplifies cleaning by keeping messes on accessible, washable surfaces under the bin.
- The decorative accent rail on this unit can be customized to match countertops, so installers can integrate rail finishes or treatments that align with surrounding surfaces, improving the visual tie-in between the waste pull-out and the rest of the kitchen.
- The waste bin in this model is platinum, and waste bins in the series are available in white and platinum, so finish selection can align with cabinet interiors or customer preference, with this specific unit supplying the platinum color for a coordinated look.
- The product class is bottom mount trash pullouts and the web description states it installs with four screws, so mounting uses a straightforward floor-based pattern that speeds up installation and reduces layout complexity in standard cabinets.
Bottom Mount Installation And Soft-Close Function
The USC12-1-50PT bottom mount waste unit is a bottom mount trash pull-out, so the frame fastens directly to the cabinet floor, creating a solid base that carries the 50 quart bin and slides without relying on sidewall hardware or special brackets.
The description states that all KVUSC Series units install with four screws, so the installation pattern is simple and repeatable across projects, which helps installers set the frame square and aligned with the cabinet front using a known, minimal fastening layout.
This model uses heavy weight ball bearing slides that are concealed, so the slides support the pull-out motion under load while hiding the mechanism, which helps keep the cabinet interior uncluttered visually while still providing smooth extension and retraction.
The web description also calls out soft close performance as part of the KV USC Series, so the slide system integrates a soft-close feature that manages the final travel of the bin, limiting slamming and helping the cabinet door and bin settle quietly into the closed position.
Using This KV USC Series Pullout In Cabinets
Where This 11-13/16 Inch Trash Pullout Fits
This Knape and Vogt USC Series unit is specified as a single 50 quart 11-13/16 inch platinum bottom mount waste pullout, so it is intended for cabinets where an opening can accommodate an 11-13/16 inch wide pull-out while still clearing hinges and face frames.
The category is Kitchen & Bath Cabinet Accessories and the product class is bottom mount trash pullouts, so this waste pull-out is positioned for use inside kitchen or bath base cabinets as an integrated waste solution that slides out on demand and disappears behind the door when closed.
The waste bin capacity is identified as 50 quart, and the weight capacity is specified as 30 lb maximum per bin, not to exceed 100 lb of total weight, so the bin volume and load rating support typical household trash loads without approaching the listed limits in routine use.
The unit uses a single platinum bin, so the available interior width is devoted to one larger container rather than two smaller ones, which is useful when a single, higher-volume bin is needed for general waste rather than split-compartment recycling within the same cabinet.
The web description notes that door mount brackets are built into the frame, so the pull-out frame is designed to connect directly to the cabinet door, allowing the door to move with the waste unit, which provides a clean, one-motion access to the bin when the door is opened.
Details That Support Repeatable Waste Pullout Installs
The manufacturer part number USC12-1-50PT positively identifies this specific single 50 quart platinum model, so specifiers and installers can order and reference the exact configuration needed, reducing the chance of mixing different widths or bin colors on multi-cabinet projects.
The description highlights a unique washable solid backsplash and solid floor under the bin, so debris that misses the bin lands on a solid, cleanable surface instead of falling to the cabinet floor, which keeps the cabinet interior cleaner and reduces extra cleanup time later.
The heavy weight ball bearing slides are described as concealed, so the slides carry the bin and frame load while staying out of sight, which gives the finished installation a more furniture-like appearance inside the cabinet and avoids exposed slide members beside the bin.
All KVUSC Series pull-outs are said to install with four screws, so installers can repeat the same fastening approach across multiple units, saving layout time and providing consistent mounting points that help standardize the workflow from cabinet to cabinet.
The product is part of KV's premium line of soft close trash pull-outs, so the integrated soft-close feature is built into the slide system, which helps the bin and door close in a controlled way, supporting quieter kitchens and reducing impact stress on cabinet fronts over time.
The waste bins are available in white and platinum across the KVUSC Series, and this model uses the platinum option, so planners can coordinate color choices across a project while still selecting this particular single-bin, 11-13/16 inch, bottom mount configuration where it is required.
Common Questions About This Soft Close Pullout
What type of cabinet installation is this USC12-1-50PT pull-out designed for?
The USC12-1-50PT pull-out is a bottom mount trash pull-out, so it fastens to the cabinet floor, making it suitable for base cabinets that can accept a floor-mounted frame under a hinged door.
How wide is the single 50 quart trash pull-out unit?
The Knape and Vogt USC Series single bin units are 11-13/16 inches wide, so this 50 quart model fits cabinet openings that can accommodate that width while providing clearance for slides and door hardware.
What is the weight capacity for the 50 quart platinum bin?
The USC12-1-50PT waste pull-out has a weight capacity of 30 lb maximum per bin, not to exceed 100 lb total, so everyday trash loads can be managed within those stated limits.
How does the soft-close feature affect cabinet use?
This KV USC Series pull-out is described as a premium soft close trash pull-out, so the built-in soft-close action slows and cushions closure, helping the door and bin return smoothly without slamming.
What materials help keep the cabinet interior cleaner?
The USC12-1-50PT pull-out has a unique washable solid backsplash and solid floor, so debris stays on these surfaces beneath the bin, allowing cleaning on the pull-out instead of inside the cabinet body.
How is the cabinet door connected to this trash pull-out?
The Knape and Vogt USC12-1-50PT has door mount brackets built into the frame, so the cabinet door can attach directly to the pull-out frame and move with the waste unit during opening and closing.
Selecting This Bottom Mount Waste Pullout
The platinum bottom mount waste pullout described as USC12-1-50PT combines a single 50 quart platinum bin with a bottom-mounted frame, concealed heavy weight ball bearing slides, and soft-close action, giving a defined solution for base cabinets needing a built-in waste station.
The unit is identified as part of Knape and Vogt's KV USC Series premium soft close trash pull-outs, with an 11-13/16 inch wide single-bin layout, washable solid backsplash and floor, and integrated door mount brackets, so it suits projects requiring a coordinated, floor-mounted trash pull-out with controlled motion.
