Knape And Vogt USC Waste Pullout For Cabinets

Knape and Vogt USC waste pullout delivers a soft close trash pull out solution that mounts at the bottom of the cabinet for a built-in feel. This USC12-1-50WH unit is part of the KV USC Series, described as KV's premium line of soft close trash pull-outs, so it is designed as an upgraded option when compared with basic slide-out waste frames. The pullout uses heavy weight ball bearing slides that are concealed, which keeps hardware out of sight and supports smooth, guided travel. A unique washable solid backsplash and solid floor form a continuous surface, so debris does not fall through to the cabinet floor and cleaning is straightforward. The frame carries a single 50 quart white bin, giving substantial capacity in a compact footprint. Single bin units in this series are 11-13/16 inches wide, which helps plan cabinet openings and layout.

Key KV USC Trash Pullout Details For Pros

• The KV USC Series is described as KV's premium line of soft close trash pull-outs, putting this unit in a higher tier for projects that call for upgraded motion and appearance.
• Bottom mount trash pullouts secure to the cabinet floor, so installers can work off a stable reference surface when aligning the unit in kitchen or bath cabinets.
• The unique washable solid backsplash and solid floor create a continuous panel, stopping debris from dropping to the cabinet bottom and simplifying wipe-down cleaning after use.
• A decorative accent rail on this waste pullout can be customized to match countertops, which helps coordinate the interior hardware look with visible surfaces.
• Heavy weight ball bearing slides are concealed, so the mechanism stays out of sight while providing guided extension suitable for repeated daily operation.
• Single bin units are 11-13/16 inches wide, giving a defined width for planning openings or retrofitting existing cabinets where space is limited.

Bottom Mount Soft Close Installation Details

This Knape and Vogt bottom mount waste pullout is designed to fasten through the base of the cabinet, which creates a solid anchor for the soft close mechanism. All KV USC Series units install with four screws, so the frame ties into the cabinet floor at four points for stability during repeated sliding cycles. The built-in door mount brackets are integrated into the frame, letting the installer fasten a cabinet door directly to the pullout structure without adding separate bracket components. A 30 pound maximum per bin weight capacity, with a total not to exceed 100 pounds, gives clear limits for loading so the slides operate within their rated range.

Using The USC12-1-50WH Waste Pullout In Projects

Where This Bottom Mount Trash Pullout Fits Best

This Knape and Vogt USC 11-13/16 inch white bottom mount waste pullout with 1-50 quart white bin is suited to cabinets that can support a single large-capacity bin. The 11-13/16 inch width specification helps when sizing face frame or frameless openings for kitchens or baths that need a dedicated pull-out waste station. Its white bin and white frame appearance work well in projects that rely on light interior tones, so the hardware visually aligns with common cabinet interiors. Being part of the bottom mount trash pullouts product class, it relies on a floor-mounted frame rather than side saddles, which can be useful in cabinets where side walls are obstructed by plumbing or other hardware.

How USC Series Details Support Repeatable Results

The KV USC Series soft close function in this USC12-1-50WH unit lets the slide mechanism control closing speed, which helps reduce slamming and structural shock on the cabinet during everyday use. Its unique washable solid backsplash and solid floor keep small items and liquids from reaching the cabinet base, protecting the underlying substrate and simplifying cleanup over time. The decorative accent rail that can be customized to match countertops gives designers a consistent visual line from work surface to pullout interior when the cabinet is open. Heavy weight concealed ball bearing slides support the stated 30 pound per bin maximum capacity, up to a total of 100 pounds, so the unit can carry typical waste loads while the slides remain hidden. Built-in door mount brackets eliminate the need for separate door mounting components, which streamlines layout when transferring door positions from face frames to the pullout frame. As part of Wurth Baer Supply's offering of Knape and Vogt hardware, this unit fits into professional woodworking workflows that already rely on branded cabinet hardware lines.

Common Questions About This USC Trash Pullout

Selecting This USC Waste Pullout For Your Job

The Knape and Vogt USC waste pullout with one 50 quart white bin, soft close slides, and a bottom mount frame offers a defined 11-13/16 inch wide solution for cabinet waste storage. With a unique washable solid backsplash and floor, concealed heavy weight ball bearing slides, and integrated door mount brackets, it supports a clean look and straightforward cabinet integration. For projects specifying a soft close trash pull out from a premium KV USC Series line, this USC12-1-50WH model from Wurth Baer Supply provides a clearly documented option ready for cabinet layouts.